Tungsten Carbide Cobalt Nanoparticles

Chromium Nanopowder

Chromium Nanoparticles

Nano Chromium Powder

MF:	Cr
Chemical Name:	Chromium
Purity:	> 99.99%
APS:	20-50 nm (Size Customization possible)
Form:	Nanopowder
Product Number:	#NCZ1401
CAS Number	7440-47-3

Note: We can supply different size products of microparticles and Nanoparticles Size range powder according to client’s requirements.

Silica Coated Aluminium Nano powder

Product	Aluminium Nano powder Silica Coated
CAS	7429-90-5
Stock No.	NCZNP101-19
Purity	99.9%
APS	< 100 nm (customization available)
Color	White
SSA	15-20 m²/g
pH	6.6
Silica Coating Thickness	10-15 nm (customization available)

Silica Coated Aluminium Nano powder

Note: We supply different products of microparticles and Nanoparticles powder in all sizes range according to the client’s requirements.

Zinc Nanoparticles Zero Valent

Zinc Nanopowder Zero Valent

MF:	Zn
Chemical Name:	Zinc
Purity:	> 99.9%
APS:	20 nm, 40 nm, 80 nm (Size Customization possible)
Form:	Nanopowder
Product Number:	NCZ6201-20A
CAS Number	7440-66-6

Note: We supply different products of microparticles and Nanoparticles powder in all sizes range according to the client’s requirements.

Zirconium Oxide Nanopowder

Product Name: Zirconium Oxide Nanopowder

Product	Zirconium Oxide Powder
MF	ZrO2
Item Code	NCZ-AM-102-20
CAS Number	1314-23-4
Particle Size	70 nm, 1 micron, 10 microns, 325 Mesh (Customization is available)
Hafnium Content	≤ 0.1% or less than 1000 ppm
Molecular Weight	123.22
Appearance	White Powder
Purity	99% to 99.999%

Zirconium Oxide Nanopowder

Stefanic et al. have study the influence of processing parameters (pH value, type of anion, and reaction temperature) on the properties of hydrous zirconia. They mix zirconium n-isopropoxide in isopropanol with aqueous solutions of different pH values and ion types. After that, they calcined the sample at 400°C. They obtain tetragonal zirconia as the dominant phase after calcination.

Stocker & Baiker have prepared zirconia aerogel by sol-gel method using tetra-n-butoxy zirconium (IV) and acid catalysis. They vary the acid to alkoxide ratio and types of alcoholic solvent in the reaction. They found out that zirconia aerogel prepared with an acid-to-alkoxide ratio of 0.95 and butanol have the largest BET surface area (205 m2g-1).

Beena et al. synthesized nanocrystalline zirconia using sol-gel and precipitation techniques. For sol-gel synthesis, they dilute zirconium propoxide to 30wt% by adding propanol and then hydrolyze with dropwise ammonia solution under continuous stirring until pH 10-10.5. For precipitation synthesis, they dissolved zirconium oxychloride in distilled water and then hydrolyzed with dropwise ammonia solution under continuous stirring until pH 10-10.5. The precipitates are then filtered and washed with distilled water to remove chlorine ions. Both sol-gel and precipitate samples are dried in an oven as well as under vacuum in rotavapor before calcined at different temperatures (400-700°C).

Size Options: also available in the other nano and micron size range, 325 Mesh, 200 Mesh, etc. (Ask for the size and ratio customization)