Foams, Foils & Nano Coatings
Aluminum Foil for Lithium Ion Battery
Aluminum Metal Foam
Aluminium Metal Foams
Product: Aluminium Metal Foam (Closed Cell or Open Cell, 2-11 mm)
| Stock No. | NCZFF108 |
| Density | 0.1 to 0.35 g/cm³ |
| Pore Size | 2-11 mm, 5 mm (Closed Cell as well as Open Cell) |
| Porosity | 60-90%, customization is also possible |
| Compressive Strength | 44 Mpa |
| Blending Strength | 27 Mpa |
| Acoustic Absorptive | 0.48 |
| Foam Size | 100 x 100 x 5 mm, customization is also possible |
Physical Characteristics Aluminium Metal Foam
| Heat Resistivity | 660 °C |
| Acoustic Frequency | Between 125 and 2000 HZ |
| Noise Reduction Coefficient | >0.4 |
| Thermal Insulation Properties | About 1 / 400 of metal Aluminium |
| Electromagnetic Wave Frequency | Between 2.6 and 18 GHZ |
| Electromagnetic Shielding Property | Up to 60 – 90 dB |
| Resistivity | 100 Times Over Metal Aluminium |
Aluminium Metal Foam Open Cell or Closed Cell, Both are Available (Ask for Customization)
Aluminum Nanofoam
 Aluminum Metal Foams
| Product Name | Aluminum Foam |
| Stock No. | NCZFF114 |
| CAS | 7429-90-5 |
| Purity | 99.9% |
| Dimension | 100 mm×100 mm, customization is also possible |
| Thickness | 5 mm, customization is also possible |
| Pore size | 2-11 mm, customization is also possible |
| Molecular Formula | Al |
| Molecular Weight | 26.98 g/mol |
| Density | 0.1~0.35 g/cm³ |
| Porosity | 60-90%, customization is also possible |
| Compressive Strength | 44 Mpa |
| Bending Strength | 27 Mpa |
| Acoustic absorptive | 0.48 |
| Tensile Strength | 1.24 MPa |
| Shear Strength | 1.31 MPa |
| Modulus of Elasticity (Compression) | 103.08 MPa |
| Modulus of Elasticity (Tension) | 101.84 MPa |
| Shear Modulus | 199.95 MPa |
| Vickers Pyramid Number | 35 HV |
| Specific Heat | .895 J/g-C |
| Bulk Thermal Conductivity | 5.8 W/m-C |
| Bulk Resistivity | 2.84 × 10-5 ohm – in |
Aluminium Metal Foam Open Cell or Closed Cell in all size, PPI and thickness, Both are Available on demand (Ask for the customization)
Copper Foam
Product: Copper Foam Structures
Copper Foam Open Cell
Copper Metal Foams| Stock No. | NCZFF101 |
| PPI | 5-120, customization is also possible |
| Bulk Density | 0.80-0.85 g/cc |
| Purity | ≥ 99.9% |
| Porosity | ≥ 70%, customization is also possible |
| Dimension | 500mm X 500 mm, customization is also possible |
| Thickness | 1 to 25 mm, customization is also possible |
Physical Characteristics of heat-absorbing Copper Foam
| Compression Strength | 131 psi |
| Tensile Strength | 1000 psi |
| Shear Strength | 190 psi |
| Modulus of Elasticity (Compression) | 107 kpsi |
| Modulus of Elasticity (Tension) | 14.6 × 103 psi |
| Shear Modulus | 40.9 kpsi |
| Vickers Hardness | 35 |
| Specific Heat | 0.385 J/g-°C |
| Bulk Thermal Conductivity | 10.1 W/m-°C |
| Coefficient of Thermal Expansion | 1.7 × 10-5 m/m–°C (0-100°C) |
| Bulk Resistivity | 2.56× 10-5 ohm – in |
| Melting Point | 1080 °C |
Copper Foil Sheets
Product: Copper Foil Sheets (Cu, Purity: >99.8%, APS: <20 μm)
| Materials | Copper Foil Sheets |
| Stock No. | NCZ-F-0011 |
| CAS | 7440-50-8 |
| Purity | ≥99.8% |
| APS | <20 µm, customization is available |
| Surface density | 175-181 g/m² |
| Tensile strength | ≥30 (25 °C) Kg/mm² |
| Extensibility | ≥8% |
| Roughness Rz | ≤3.0 μm |
| Thickness Tolerance | -0, 3 |
| Width Tolerance | ±1 |
| Tolerance Oxidation Susceptibility | 160°C/10 min.no oxidation |
| Polished | Single/Both Side Polished |
| Appearance Quality | No oxidation, smooth and no concave-convex |
Electrical Conductive Nickel Metal Foam
Nickel Metal Foam
| Product Name | Nickel Metal Foam |
| Stock No | NCZFF104 |
| CAS | 7440-02-0 |
| Purity | > 99.9% |
| PPI | 10-95, customization is available |
| Pore Size | 00.5-0.5 mm, customization is available |
| Length | 500 mm, customization is available |
| Width | 500 mm, customization is available |
| Thickness | 1-20 mm, customization is available |
| Porosity | ≥ 95%, customization is available |
| Molecular Formula | Ni |
| Molecular Weight | 58.71 g/mol |
| Melting Point | 1453 °C |
| Boiling Point | 2730 °C |
| Density | 8.90 g/cm³ |
| Surface Density | 346g/m^2 |
Nickel Foam is available in a closed cell as well as open cell, please ask for customization while ordering.
EVA Foam (Ethylene Vinyl Acetate and blended copolymers)
Product: EVA Foam Sheet (Ethylene Vinyl Acetate and blended copolymers)
CAS No.: 24937-78-8
Stock Number: NCZFF111
| Product Name | EVA Foam Sheet |
| Purity | >99.9% |
| Density | 30 kg/m3 |
| Surface Hardness | 40 °C |
| Tear Strength | 0.35 N/mm m² |
| Tensile Strength | 780 Kpa |
| Elongation at break | 100 % |
| Compression Strength | 78 Kpa |
| Compression deformation | 25 % |
| Size Change Rate | 0.8 % |
| Rebound Rate | 26.00 % |
| Elongation | 130 % |
| Service Temperature | -30 to 180 °F |
| Thermal Conductivity | 0.038 W/mK |
| Adhesive Thickness | 0.15 mm |
| Adhesive Weight | 80 g/m³ |
| Adhesion | 18 N/25 mm |
| Application | 10 °C min |
| Service | -50~ 100 °C |
| Short peak | 120 °C |
| Storage Life | 3 year |
Ask for customization while ordering
Nickel Foil
Product: Nickel Foil (Ni, Purity: 99.9%, Thickness: 12 µm)
| Materials | Nickel Foil |
| Stock No. | NCZ-F-0015 |
| CAS | 7440-02-0 |
| Purity | ≥ 99.9% |
| Thickness | 12 μm, customization is available |
| Width | 30~500 mm, customization is available |
| Surface density | 8.908Â g/cm3 |
| Melting Point | 1455 °C |
| Boiling Point | 2730 °C |
| Joint | 1pcs/roll |
| Polished | One/Both Side Polished |
| Polished | One Side Coarse |
Open Cell Copper Foam Heat Exchanger
Open Cell Copper Foam Heat Exchanger
Copper Metal Foam open cell
| Stock No. | NCZFF105 |
| PPI | 10 to 110 PPI, customization is also possible |
| Bulk Density | 0.80-0.85 g/cc |
| Purity | ≥99.9% |
| Porosity | ≥70%, customization is also possible |
| Dimension | 500 mm X 500 mm, customization is also possible |
| Thickness | 1 mm to 25 mm, customization is also possible |
| Compression Strength | 131 psi |
| Tensile Strength | 1000 psi |
| Shear Strength | 190 psi |
| Modulus of Elasticity (Compression) | 107 kpsi |
| Modulus of Elasticity (Tension) | 14.6 × 103 psi |
| Shear Modulus | 40.9 kpsi |
| Vickers Hardness | 35 |
| Specific Heat | 0.385 J/g-°C |
| Bulk Thermal Conductivity | 10.1 W/m-°C |
| Coefficient of Thermal Expansion | 1.7 × 10-5 m/m–°C (0-100°C) |
| Bulk Resistivity | 2.56× 10-5 ohm – in |
| Melting Point | 1080 °C |
Ask for customization while ordering
Palladium Metal Foil
Product: Palladium Metal Foil (Pd, Purity: 99.9%, Thickness: 12 µm)
| Materials | Palladium Metal Foil |
| Stock No. | NCZ-F-0016 |
| CAS | 7440-05-3 |
| Purity | ≥ 99.9% |
| Thickness | 12 μm, customization is possible |
| Width | 30~500 mm, customization is possible |
| Surface density | 12.023Â g/cm3 |
| Melting Point | 1554 °C |
| Boiling Point | 2963 °C |
| Joint | 1pcs/roll |
| Polished | One / Both Side Polished |
| Polished | One Side Coarse |
Polyethylene Foam
Product: Polyethylene Foam (Closed Cell, Purity: >99.9%)
CAS: 9002-88-4| Product Name | Polyethylene Foam |
| Product Code | NCZFF110 |
| Purity | >99.9% |
| Density | 1.2 (LB/Cubic Ft. |
| Color | White |
| Cell Count | 18 (cells/inch) |
COMPRESSIVE STRENGTH
| 25% | 7 (LB/In. Sq.) |
| 50% | 12 (LB/In. Sq.) |
COMPRESSION SET
| 2 hours | 30 % |
| 24 hours | 24 % |
| Compression Creep | 5 % |
| Water Absorption | 0.06 LB/Sq. Ft. |
| Thermal Stability | <2 % |
| Service Temperature | -30 to 180 °F |
| Contains Fire Retardant Additives | No |
Polyethylene Foam Closed Cell as well as Open Cell (Ask for customization while ordering)
Premium Grade Copper Metal Foams
Product: Copper Foam (Cu Foam, Purity: 99.9%, 50PPI/1mm)
Copper Metal Foams
| Stock No. | NCZFF102 |
| PPI | 10 to 110, customization is also possible |
| Bulk Density | 0.80-0.85 g/cc |
| Purity | ≥99.9% |
| Porosity | ≥70% , customization is also possible |
| Dimension | 500 mm X 500 mm, customization is also possible |
| Thickness | 1mm to 25mm, customization is also possible |
| Compression Strength | 131 psi |
| Tensile Strength | 1000 psi |
| Shear Strength | 190 psi |
| Modulus of Elasticity (Compression) | 107 kpsi |
| Modulus of Elasticity (Tension) | 14.6 × 103 psi |
| Shear Modulus | 40.9 kpsi |
| Vickers Hardness | 35 |
| Specific Heat | 0.385 J/g-°C |
| Bulk Thermal Conductivity | 10.1 W/m-°C |
| Coefficient of Thermal Expansion | 1.7 × 10-5 m/m–°C (0-100°C) |
| Bulk Resistivity | 2.56× 10-5 ohm – in |
| Melting Point | 1080 °C |
Reticulated Vitreous Carbon Foam (open cell carbon foam) RVC Foam
Reticulated Vitreous Carbon Foam /Glassy Carbon Foam
Open cell carbon foam Reticulated Vitreous Carbon Foam Product Carbon Foam (Purity: 99.9%, Thickness: 5 mm)| Materials | Carbon Foam |
| Stock No | NCZFF112 |
| CAS | 7440-44-0 |
| Purity | 99.9% |
| Thickness | 2-10 mm, customization available |
| Compression Strength | 15-75 psi |
| Tensile Strength | 25-50 psi |
| Shear Strength | 4.4×103 psi |
| Hardness | 6-7 Mohs |
| Specific Heat | 0.3 BTU/lb °F |
| Shear Modulus | 4.4 × 103 psi |
| Bulk Thermal Conductivity | 0.021-0.29 BTU/ft •hr•°F |
| Coefficient of Thermal Expansion | 1.2 × 10-6 in/in°F (0-100°C) |
| Bulk Resistivity | 12.7 × 10-2  ohm • in |
| Temperature In air | 600°F |
| Limitations Inert environment | 6330°F |
| Pore Sizes | 0.040″, customization is also possible |
| Size | 50 x 50 mm, 100 x 100 mm, 200 x 300 mm (Ask for customization) |
Reticulated vitreous carbon foam Available in Open Cell as well as Closed cell
RVC foam density is customizable on request while ordering. reticulated vitreous carbon foam reticulated foam.
Application: Reticulated Vitreous Carbon Foam for Electrochemistry Electrodes, High Surface Area, Temperature Stability, etc. RVC foam reticulated foam
12.7 × 10-2  ohm • in of RVC foam
50 x 50 x 5 mm RVC Foam with 80 PPI is ready stock, customization is also possible in RVC foam.
Product: Carbon Foam (Purity: 99.9%, Thickness: 5 mm) reticulated vitreous carbon foam, RVC foam, Reticulated foam
Stainless Steel Foam
Stainless Steel Foam
Product: Stainless Steel Foam – 50PPI/3mm
| Stock No. | NCZFF107 |
| PPI | 10 to 110, customization is available |
| Surface Density | 346g/m^2 |
| Purity | ≥99.9% |
| Porosity | ≥95%, customization is available |
| Length | 300 mm, customization is available |
| Width | 300 mm, customization is available |
| Thickness | 3 mm, customization is available |
Stainless Steel Foam Available in Open Cell as well as Closed Cell
Tungsten Metal Foil
Product: Tungsten Metal Foil (W, Purity: 99.9%, Thickness: 12 µm)
| Materials | Tungsten Metal Foil |
| Stock No. | NCZ-F-0014 |
| CAS | 7440-33-7 |
| Purity | ≥ 99.9% |
| Thickness | 12 μm / Customization is available |
| Width | 30~500 mm |
| Surface density | 19.25Â g/cm3 |
| Melting Point | 3422 °C |
| Boiling Point | 5930 °C |
| Joint | 1pcs/roll |
| Polished | One /Both Side Polished |
| Polished | One Side Coarse |