Product Name: CoCrW Alloy Powder

Description:

RELATED INFORMATION

Storage Conditions:

Airtight sealed, avoid light, and keep dry at room temperature.

Please email us for the customization.

Email: contact@nanochemazone.com

Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.

Product Name: Ferro Titanium Carbide Powder

Ferro Titanium Carbide Powder Applications Fields:

Ferro Titanium Carbide Powder is a ferroalloy, an alloy of iron and titanium with between 10–20% iron and 45–75% titanium and sometimes a small amount of carbon. Ferrotitanium can be manufactured by mixing titanium sponge and scrap with iron and melting them together in an induction furnace.

During steelmaking, titanium is usually introduced as ferrotitanium because of its relatively low melting temperature and high density.

Ferrotitanium is usually produced by induction melting of titanium scrap with iron or steel; however, it also is produced directly from titanium mineral concentrates.

Application of Ferro Titanium carbide powder:

In the present study, Fe-based hardfacing coating reinforced by TiC particles was obtained by manual shielded metal arc welding (SMAW) in which H08A bare electrode was coated with fluxes, to which different measures of ferrotitanium, rutile, graphite, calcium carbonate, and calcium fluoride had been added.

The microstructure and wear properties of the hardfacing coating were studied through scanning electron microscopy (SEM), transmission electron microscopy (TEM), an X-ray diffractometer (XRD), and a wear test.

The results indicate that TiC particles are produced by a direct metallurgical reaction between ferrotitanium and graphite during welding.

TiC particles are uniformly dispersed in the matrix of lath martensite and retained austenite with particle sizes in the range of 3–5 μm. Fe-based hardfacing coating reinforced by TiC particles is found to possess better wear resistance and a lower coefficient of friction than that of the AISI 1045 steel substrate.

Please email us for the customization.

Email: contact@nanochemazone.com

Please contact us for customization and price inquiry

Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.

Product Name: Hafnium Carbide Powder

Brief Description of Hafnium carbide powder HfC: 

Hafnium carbide ( HfC) is a chemical compound of hafnium and carbon

With a melting point of about 3900 °C it is one of the most refractory binary compounds known.

However, it has low oxidation resistance, with the oxidation starting at temperatures as low as 430 °C

Hafnium carbide is usually carbon deficient and therefore its composition is often expressed as HfCx (x = 0.5 to 1.0). It has a cubic (rock-salt) crystal structure at any value of x

 Application of Hafnium carbide powder HfC:

1. Used for preparation of ultra-high temperature ceramics
2. The reactant in the synthesis of hafnium-containing organometallic polymers
3. Used as an additive in alloys
4. Used in coatings
5. Widely used in microelectronics, semiconductor, aerospace high-temperature resistant material, coating materials, ceramic materials, ceramic target material, etc.

Hafnium carbide Powder related Information

Please email us for the customization.

Email: contact@nanochemazone.com

Please contact us for customization and price inquiry

Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.

Product Name: Silicon Carbide Powder

Silicon Carbide Powder Description:

Silicon carbide is produced in the same way as Black silicon Carbide except for some differences in the raw material. Its crystallization has higher purity and hardness. Green silicon carbide is suitable for processing hard alloy, metallic and non-metallic materials with hard and brittle features such as copper, brass, Aluminum, magnesium, jewel, optical glass, ceramics, etc.

Silicon Carbide Applications: 

• One of the best properties of silicon carbide is that it is resistant to alkali and acids.
• It retains strength when applied at high temperatures.
• It shows good electrical conductivity and shock resistance capacity and for this reason, it is preferred for applying in an electric furnace to heat elements.
• It is compatible to apply under extreme conditions of applications.
• Apart from that, this chemical component also shows considerable thermal expansion and conductivity.
• It is an ideal component for applications requiring good flexural strength.
• We provide this product after evaluating the properties, ingredients, and applicability to cover a wide range of industrial usages.

Advantages:

1. Large melting furnace, longer melting time, lead to more crystallization, bigger crystals, higher purity, and fewer impurities.
2. Beckman coulter particle size distribution instrument.
3. The laboratory is registered at the government Import and Export Inspection Bureau.

Silicon Carbide Powder Related Information

Please email us for the customization.

Email: contact@nanochemazone.com

Please contact us for customization and price inquiry

Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.