₹0.00
Palladium Rhodium Dispersion
| Product | Palladium Rhodium Nanoparticles |
| CAS No. | 7440-05-3 / 7440-16-6 |
| Appearance | Gray Powder |
| Purity | 99.9% |
| APS | 10nm  (Can be customized) |
| Ingredient | Pd /Rh |
| Product Code | NCZ-NSC438/20 |
Palladium Rhodium Dispersion used as catalysts for proton exchange membrane fuel cell (PEMFC), for industrial synthesis of nitric acid, reduction of exhaust gases from vehicles and as catalytic nucleating agents for synthesis of magnetic NPs. NPs can act as catalysts in homogeneous colloidal solution or as gas-phase catalysts while supported on solid state material. The catalytic reactivity of the NP is dependent on the shape, size and morphology of the particle.
One type of platinum NPs that have been researched on are colloidal platinum NPs. Monometallic and bimetallic colloids have been used as catalysts in a wide range of organic chemistry, including, oxidation of carbon monoxide in aqueous solutions, hydrogenation of alkenes in organic or biphasic solutions and hydrosilylation of olefins in organic solutions.
Colloidal platinum NPs protected by Poly(N-isopropylacrylamide) were synthesised and their catalytic properties measured. It was determined that they were more active in solution and inactive when phase separated due to its solubility being inversely proportional to temperature
Through the control of percent composition of 2–5 nm platinum nanoparticles on SiO2, Zhang et al. modeled distinct absorption peaks attributed to platinum in the visible range, distinct from the conventional SPR absorption. This research attributed these absorption features to the generation and transfer of hot electrons from the platinum nanoparticles to the semiconductive material.
The addition of small platinum nanoparticles on semiconductors such as TiO2 increases the photocatalytic oxidation activity under visible light irradiation. These concepts suggest the possible role of platinum nanoparticles in the development of solar energy conversion using metal nanoparticles. By changing the size, shape and environment of metal nanoparticles, their optical properties can be used for electrontic, catalytic, sensing, and photovoltaic applications
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature. Â
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Note: For pricing & ordering information, please contact us at sales@nanochemazone.com
Please contact us for quotes on Larger Quantities & Customization. E-mail: contact@nanochemazone.com
If you are planning to order large quantities for your industrial and academic needs, please note that customization of parameters (such as size, length, purity, functionalities, etc.) are available upon request.
You must be logged in to post a review.
| Product | Bismuth Oxide Dispersion |
| CAS | 1304-76-3 |
| Product Number | NCZ-D-1502N |
| APS | < 1µm |
| Purity | 99% |
| Molecular Formula | Bi2O3 |
| Form | Liquid |
| Molecular Weight | 465.96 g/mol |
| Concentration | 10 wt% |
| Solubility | Soluble in Water + IPA |
| Product Number | NCZ-D-1504N |
| CAS | 10043-11-5 |
| APS | 80-100 nm (Size Customization is possible) |
| Purity | 99.99 % |
| Molecular Formula | BN |
| Molecular Weight | 24.82 g/mol |
| Form | Liquid |
| Density | 1.9-2.1 g/cm3 |
| Thermal Expansion | 0.54 to 18 µm/m-K |
| Passion Ration | 0.11 |
| Young’s Modulus | 14 to 60 GPa |
| Product | Graphene Dispersion Organic Solvent |
| Product Number | NCZ-D-107N |
| CAS | 7782-42-5 |
| Purity | > 98 % |
| Molecular Formula | C |
| Molecular Weight | 12.01 g/mol |
| Form | Liquid |
| Color | Brown/black |
| Density | ~ 2.1 g/cm³ at 20 °C |
| Concentration | 1 mg/ml (Customization is possible) |
| Product | Nickel (II) Oxide Dispersion |
| Product Number | NCZ-D-108-N |
| CAS | 1313-99-1 |
| HS Code | 28254000 |
| APS | 50 nm (Size Customization is possible) |
| Purity | 99.9% |
| Molecular Formula | NiO |
| Form | Dispersion |
| Colour | Milky Green |
| Boiling Point | < 120 °C |
| PH value | 6 - 7 |
| Solvent | Butanol/Water/IPA (customization available) |
| Concentration | 3 wt% |
| Product | Niobium Doped TiO2 Dispersion |
| Product Number | NCZ-D109-N |
| CAS | 13463-67-7 |
| HS Code | 32061110 |
| APS | 2-5 µm (Size customization is possible) |
| Purity | 99.9% |
| Molecular Formula | Nb/TiO2 |
| Form | Dispersion (Also available in powder form) |
| PH value | 7.5±1.5 |
| Solvent | IPA/Ethanol |
| Content | 3-5 wt% |
| Density | 1.7 g/mL±0.1 g/mL at 25 °C |
| Doping | Niobium (Nb) Doped |
| MF: | Ag |
| Chemical Name: | Silver Nano Water Dispersion |
| Purity: | > 99.99% |
| APS: | <80 nm (Size Customization possible) |
| Form: | Nano dispersion |
| Product Number: | NCZD1004 |
| CAS Number | 7440-22-4 |
The antibacterial effects of silver nanoparticles have been used to control bacterial growth in a variety of applications, including dental work, surgery applications, wounds and burns treatment, and biomedical devices. It is well known that silver ions and silver-based compounds are highly toxic to microorganisms.
| MF: | SWCNT |
| Chemical Name: | SWCNT Dispersion |
| Purity: | Â > 99.99% |
| Diameter | 1 to 2 nm (Size Customization possible) |
| Form: | Nano dispersion |
| Product Number: | NCZD2801 |
| CAS Number | 308068-56-6 |
| MF: | ZrO2 |
| Chemical Name: | Zirconium Oxide Dispersion |
| Purity: | >99.99% |
| APS: | 20-80 nm (Size Customization possible) |
| Form: | Nano dispersion |
| Product Number: | NCZD3201 |
| CAS Number | 1314-23-4 |
No account yet?
Create an Account
Reviews
There are no reviews yet.