Aminated Graphene Quantum Dots
Product Number | NCZC3001 |
CAS Number | 7440-40-0 |
Concentration | 1mg/mL to 20 mg/mL (in stock), Concentration Customization Possible |
Carrier | Water, Ethanol, IPA, NMP, Toluene, Methanol, Dispersion Customization Possible |
APS | 5-7 nm |
Package Size | 1-100 mL |
Composition: |
Aminated Graphene Quantum Dots |
Appearance: | Colorless solution |
PL peak: | 440 nm (reference only, the actual value may vary) |
Particle Size: | < 7 nm |
Concentration: | 1 mg/mL (available up to 20mg/mL) |
Solution: | Water |
Purity: | >99.9% |
Antimony Oxide Nanoparticles
Antimony Oxide Nanoparticles
Product | Antimony Trioxide Nano powder |
Stock No. | NCZNP103-19 |
Purity | 99.9% |
APS | 80 nm (customization available) |
CAS Number | 1309-64-4 |
Formula | Sb2O3 |
Density | 5.2g/cm3 |
Melting Point | 656 ˚C |
Boiling Point | 1425 ˚C |
Antimony Oxide Nanoparticles
Note: We can supply different size products of microparticles and Nanoparticles Size range powder according to the client’s requirements.Antimony Tin Oxide Dispersion
MF: | ATO |
Chemical Name: |
Antimony Tin Oxide Dispersion |
Purity: | >99.99% |
APS: | 20-80 nm (Size Customization possible) |
Form: | Nano dispersion |
Product Number: | NCZD1501 |
CAS Number | 128221-48-7 |
Antimony tin oxide nanoparticles
Antimony tin oxide nanoparticles
MF: | SnO2/Sb2O3 |
Chemical Name: | Antimony Tin Oxide |
Purity: | > 99.99% |
APS: | 10 nm (Size Customization possible) |
Form: | Nanopowder/NanoDispersion |
Product Number: | #NCZ501 |
CAS Number | 128221-48-7 |
Antimony tin oxide nanoparticles
Note: We can supply different size products of microparticles and Nanoparticles Size range powder according to the client’s requirements.Antimony Tin Oxide Nanopowder Dispersion
Antimony Tin Oxide Nanopowder Dispersion
Product | Antimony Tin Oxide Nanopowder Dispersion |
CAS No. | 12673-86-8 |
Appearance | Black Powder |
Purity | 99.9% |
APS | 20nm(Can be customized) |
Ingredient | SnO2 |
Product Code | NCZ-NSC460/20 |
Antimony Tin Oxide Nanopowder Dispersion
Antimony Tin Oxide Nanopowder Dispersion used in LCD, LED, and ECD. Transparent electrode and solar battery. Antimony Tin Oxide Nanopowder Dispersion can shield heat when it is used in a hot mirror, building, or glass curtain wall.
Antimony Tin Oxide Nanopowder Dispersion can be used in the glass of the car, train, and plane to protection against fog and frost. Due to the decline of the microwave, ATO Nanoparticles can be used in the computer room and radar shielding and protecting area where needs to shield electromagnetic wave.
The product of ATO Nanoparticles has an excellent quality of electricity and optics. Due to its good conductivity, ATO Nanoparticles can be widely used in the industry of coating, chemical fiber, and polymeric membrane as anti-static material.
ATO Nanoparticle has more advantaged properties in dispersion, weather-ability, thermoplastic, wear resistance, and security than some other conductive materials such as graphite, surfactant, and metallic powder, etc.
Nanopowder of ATO can also be used in the field of optoelectronic display devices, transparent electrode, solar battery, liquid crystal display, catalysis, and other industries with its advantages.
Antimony Tin Oxide Dispersion Related Information
Storage Conditions: Airtight sealed, avoid light, and keep dry at room temperature. Please contact us for customization and price inquiry Email: contact@nanochemazone.com Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.Antimony Tin oxide Powder
Antimony Tin oxide Powder
Product Name: Antimony Tin oxide powderProduct | Antimony Tin oxide powder |
Colour | White |
Purity | ≥ 99.9% |
Particle size | 1-10 µM (customizable) |
Ingredient/MF | SnO2, Sb2O3 |
Product Code | NCZ-CM-176/20 |
CAS Number | 18282-10-5/1309-64-4 |
- ATO has excellent electrical and optical properties that are widely used as good electrical conductivity, also as an antistatic agent widely used in paint, chemical fiber, polymer film field.
- ATO has good insulation properties. Used the ATO coating to be made of automotive glass is an excellent effect of shielding and reflecting infrared radiation.
- ATO with super fine conductive properties can be used in paints, textiles, plastics, and other fields, the direct mixing of liquid and configuration system, good compatibility.
- ATO has excellent electrical and optical properties. Used as an antistatic agent is widely used in paint, chemical fiber, polymer film field.
ARTIFICIAL ECCRINE PERSPIRATION
Artificial Eccrine Perspiration
ARTIFICIAL SWEAT
Product Number: NCZ-APS-0011
Packaging: 100 mL to 1000 mL
Artificial Eccrine Perspiration we offer is a ready-to-use solution and is the closest mimic to true human eccrine sweat. It consists of nineteen amino acids, the seven most abundant minerals, and the four most abundant metabolites at a pH of 4.5. All concentrations closely match experimentally determined values for adult human eccrine sweat.
The stabilized solution is preserved with a fungicide and bactericide for two years of shelf life at room temperature. The non-stabilized product is kept frozen and has a shelf life of one year.
Note: Custom formulations at varying pH (2-9) can be made as either the stabilized or non- stabilized solutions.
The stabilized version has a preservative that prevents microbial growth and can then be stored at room temperature. The not stabilized version has no preservative and must be kept frozen until you intend to use it. You may need this version if you are testing a product that claims to prevent microbial growth or odor from perspiration. Our Artificial Eccrine Perspiration normally comes at pH 4.5, however, we can make it custom from pH 2.0 – 9.0.
Simulated Saliva Applications:
Makers of smartwatches, high-performance textiles, biosensors, heads-up displays, and fitness monitors all have one thing in common – the need to test their products for quality assurance. Personal electronics and wearable technology manufacturers perform sweat testing on materials including touch screens, watchbands, keyboards, eyeglasses, and any other product material or surface that would benefit from guaranteed reproducible results with artificial perspiration. By using artificial eccrine perspiration, our customers are able to save time and ensure the same repeatable results anywhere, anytime.
Contact us for Customization: sales@nanochemazone.comArtificial Saliva
Artificial Saliva
Product Number: NCZ-APS-0012
Packaging: 100 mL to 1000 mL
We provide several formulations of artificial saliva based on official testing methods as well as published scientific data. To increase the stability of some products during storage, several artificial saliva formulations come as 2-part formulations that need to be combined before use. Custom formulations to accommodate specific pH or ingredient requirements are also available upon request.
Simulated Saliva Applications:
For testing of products for corrosion, colorfastness, and discoloration
For testing biodegradability of dental metal alloys
To determine colorfastness of products intended to be taken into the mouth
ARTIFICIAL SALIVA FOR PHARMACEUTICAL RESEARCH
Artificial Saliva is formulated according to literature for pharmaceutical research such as studies of drug dissolution and drug delivery through the oral mucosa. This is ready to use formulation that should be stored refrigerated. The pH of the solution is 6.8.
ARTIFICIAL SALIVA FOR MEDICAL AND DENTAL RESEARCH
This Artificial Saliva is formulated according to literature references for medical and dental research. This formulation has a similar composition to commercially available products used to treat dry mouth and other conditions. This ready-to-use solution contains Sodium Carboxymethyl Cellulose to increase the viscosity of the solution and make it behave similarly to natural human saliva. This formulation can be stored at room temperature and has a pH of 6.8. This solution is only intended for product testing and research, and not for medical use.
pH and contents are customizable upon request.Artificial Saliva is formulated to Test Products for Colorfastness and Biodegradability of Dental Metal Alloys
Contact us for Customization: sales@nanochemazone.comARTIFICIAL SEBUM
Artificial Sebum Solution
SYNTHETIC SEBUM FORMULATION
Product Number: NCZ-APS-0012-20
Packaging: 100 mL to 1000 mL
NOTE: Custom pH formulations can be made in the pH range from 2.0 to 9.0. For custom component formulations please contact sales@nanochemazone.com for a quote.Sebum stabilized solution is preserved with a fungicide and bactericide for two years of shelf life at room temperature. Artificial Sebum without stabilized known as non-stabilized sebum if this product is kept frozen and then it has a shelf life of one year.
Note: Custom formulations at varying pH (2-9) can be made as either the stabilized or non- stabilized solutions.
Artificial Sebum stabilized version has a preservative that prevents microbial growth and can then be stored at room temperature. The not stabilized version has no preservative and must be kept frozen until you intend to use it. You may need this version if you are testing a product that claims to prevent microbial growth or odor from perspiration. Our Artificial Sebum normally comes at pH 4.5, however, we can make it custom from pH 2.0 – 9.0.
Artificial Sebum Applications:
Sebum is an oily secretion produced by sebaceous glands, which spreads over the hair and skin for waterproofing purposes. Nanochemazone manufactures an artificial sebum formulation according to ASTM designation D4265-14 or D4265-98. It is ready-to-use and provides the reliability, reproducibility, and convenience needed for testing. This formulation can be used according to AATCC Standard Test Method 130-2010 for evaluating the efficacy of home laundry products and conditions to remove stains from fabric.
Contact us for Customization: sales@nanochemazone.com
ARTIFICIAL SWEAT
Artificial Sweat/Eccrine Perspiration
ARTIFICIAL SWEAT/SYNTHETIC SWEAT
Product Number: NCZ-APS-0011-20
Packaging: 100 mL to 1000 mL
NOTE: Custom pH formulations can be made in the pH range from 2.0 to 9.0. For custom component formulations please contact sales@nanochemazone.com for a quote.Artificial Eccrine Perspiration we offer is a ready-to-use solution and is the closest mimic to true human eccrine sweat. It consists of nineteen amino acids, the seven most abundant minerals, and the four most abundant metabolites at a pH of 4.5. All concentrations closely match experimentally determined values for adult human eccrine sweat.
Artificial Sweat stabilized solution is preserved with a fungicide and bactericide for two years of shelf life at room temperature. The non-stabilized product is kept frozen and has a shelf life of one year.
Note: Custom formulations at varying pH (2-9) can be made as either the stabilized or non- stabilized solutions.
Artificial Eccrine Perspiration stabilized version has a preservative that prevents microbial growth and can then be stored at room temperature. The not stabilized version has no preservative and must be kept frozen until you intend to use it. You may need this version if you are testing a product that claims to prevent microbial growth or odor from perspiration. Our Artificial Eccrine Perspiration normally comes at pH 4.5, however, we can make it custom from pH 2.0 – 9.0.
Artificial Eccrine Perspiration Applications:
Makers of smartwatches, skin drug testing, pharmaceutical industries, high-performance textiles, biosensors, heads-up displays, and fitness monitors all have one thing in common – the need to test their products for quality assurance. Personal electronics and wearable technology manufacturers perform sweat testing on materials including touch screens, watchbands, keyboards, eyeglasses, and any other product material or surface that would benefit from guaranteed reproducible results with artificial perspiration. By using artificial eccrine perspiration, our customers are able to save time and ensure the same repeatable results anywhere, anytime.
Contact us for Customization: sales@nanochemazone.com
Artificial Urine
Artificial Urine
Product Number: NCZ-APS-0014
Packaging: 100 mL to 1000 mL (Also available in 25 Litre Containers)Artificial Urine for Corrosion Testing of Urological Implants, Stabilize
Artificial is designed for testing metallic biomaterials used to produce urological implants and catheters. This convenient product is a ready-to-use solution. Artificial Urine formulation contains a non-toxic preservatives to avoid bacteria growth and can be stored at room temperature. The pH of the final solution is 6.0.
Sodium Chloride 6.773 g/LSodium Phosphate Monobasic, Dihydrate 1.33 g/LPotassium Chloride 6.065 g/LCalcium Chloride Dihydrate 0.883 g/LSodium Citrate Dihydrate 0.584 g/L | Sodium Phosphate Dibasic 0.435 g/LSodium Sulfate 2.431 g/LMagnesium Sulfate, Heptahydrate 0.731 g/LAmmonium Chloride 2.322 g/LPro-Clean 0.3 mL/L |
The pH of the solution 6.6 /- 0.1Urea 25.0 g/LSodium Chloride 9.0 g/LDisodium Hydrogen Orthophosphate, anhydrous 2.5 g/L | Potassium Dihydrogen Orthophosphate 2.5 g/LAmmonium Chloride 3.0 g/LCreatinine 2.0 g/LSodium Sulphite, hydrated 3.0 g/L |
Au TiO2 Core Shell Nanoparticles
Gold Titanium Oxide Core-Shell Nanoparticles
MF: | Au/TiO2 |
Chemical Name: | Gold Titanium Oxide Core-Shell Nanoparticles |
Purity: | >99.99% |
APS: | 80-100 nm (Size Customization possible) |
Form: | Nanopowder/Nanodispersion |
Product Number: | NCZCS118 |
CAS Number: | 7440-57-5 |
Barium Iron Oxide Nanoparticles
Barium Iron Oxide Nanoparticles
MF: | BaFe12O19 |
Chemical Name: | Barium Dodecairon Nonadecaoxide |
Purity: | > 99.99% |
APS: | 100 nm (Size Customization possible) |
Form: | Nanopowder |
Product Number: | #NCZ601 |
CAS Number | 12047-11-9 |
Barium Iron Oxide Nanoparticles
Note: We can supply different size products of microparticles and Nanoparticles Size range powder according to the client’s requirements.Barium Sulfate (BaSO4) Nanoparticles
Barium Sulfate Nanoparticles
MF: | BaSO4 |
Chemical Name: | Barium Sulfate |
Purity: | > 99.99% |
APS: | 200-500 nm (Size Customization possible) |
Form: | Nanopowder |
Product Number: | #NCZ701 |
CAS Number | 7727-43-7 |
Barium Sulfate Nanoparticles
Note: We can supply different size products of microparticles and Nanoparticles Size range powder according to the client’s requirements.Barium Sulfate Dispersion
MF: | BaSO4 |
Chemical Name: | Barium Sulfate |
Purity: | > 99.99% |
APS: | 200-500 nm (Size Customization possible) |
Form: | Nanodispersion (Water, IPA, Ethanol) |
Product Number: | NCZ-D-001004 |
CAS Number | 7727-43-7 |
Barium Titanate Nanopowder
Barium Titanate Nanopowder
MF: | BaTiO3 |
Chemical Name: | Barium Titanate |
Purity: | > 99.99% |
APS: | 100 nm (Size Customization possible) |
Form: | Nanopowder |
Product Number: | #NCZ801 |
CAS Number | 12047-27-7 |
Barium Titanate Nanopowder
Note: We can supply different size products of microparticles and Nanoparticles Size range powder according to the client’s requirements.Bilirubin Powder
MF: | Bilirubin |
Chemical Name: | Bilirubin Powder |
Purity: | > 99% (45%, 60% & 90% also available) |
APS: | 40-50 µm (Size Customization possible) |
Form: | Micro powder |
Product Number: | NCZM102 |
CAS Number | 635-65-4 |
Bismuth (III) sulfide Powder
Bismuth Sulphide Powder
Bismuth Sulfide Powder Nano and Micron Size Range
Product | Bi2S3 |
Product Number | NCZM130 |
Purity | 99.5% |
APS: | 5 µm (Size Customization is available) |
CAS Number | 1345-07-9 |
Formula | Bi2S3 |
Product Details | Bismuth Sulfide Powder |
Melting Point: | 685 ˚C |
Density: | 7.6-7.8 g/cm3 |
Bi: S | ~81 %,: ~19 % (Customization is available) |
Bismuth Metal Polycrystalline Powder
Product Name: Bismuth Metal Polycrystalline Powder
Product | polycrystalline |
CAS No. | 7440-69-9 |
Appearance | brown Powder |
Purity | 99.9% |
APS | 1 – 5 Microns (Can be customized) |
Ingredient | Bi |
Product Code | NCZ-NSC-275/20 |
Bismuth Nanopowder
Bismuth Nanopowder
Bismuth metal Nanopowder
Bismuth Nanoparticles
Product |
Bismuth Nanopowder |
Formula | Bi |
Stock No. | NCZNP104-19 |
CAS | 7429-90-5 |
Purity | 99.9% |
APS | < 100 nm (customization available) |
Melting Point | 271 ˚C |
SSA | 20 m2/g |
Boiling Point | 143.-1560 ˚C |
Bismuth Oxide Dispersion
Product | Bismuth Oxide Dispersion |
CAS | 1304-76-3 |
Product Number | NCZ-D-1502N |
APS | < 1µm |
Purity | 99% |
Molecular Formula | Bi2O3 |
Form | Liquid |
Molecular Weight | 465.96 g/mol |
Concentration | 10 wt% |
Solubility | Soluble in Water + IPA |
Bismuth Oxide Nanopowder
Bismuth Oxide Nanopowder
Product | Bismuth Oxide Nanoparticles |
Formula | Bi2O3 |
Stock No. | NCZNP105-19 |
CAS | 1304-76-3 |
Purity | 99.9% |
APS | 40 nm to 200 nm (customization available) |
Morphology | Spherical |
Density | 8.9 g/cm3 |
Bismuth Oxide Nanopowder
Note: We supply different size products of microparticles and Nanoparticles Size range powder according to the client’s requirements.Bismuth Oxychloride
Product Name: Bismuth Oxychloride
Product | Bismuth Oxychloride |
CAS No. | 7787-59-9 |
Color | Pearl White |
Purity | ≥ 99 % |
APS | 1-5 um (can be customised) |
Ingredient | BiOCl |
Product Code | NCZ-MS-104 |
Bismuth Powder
Bismuth Metal Powder
Bismuth Powder Nano and Micron particle size range
MF: | Bi |
Chemical Name: | Bismuth Powder |
Purity: | > 99.99% |
APS: | 40-50 µm (Size Customization possible) |
Form: | Micro powder |
Product Number: | NCZM103 |
CAS Number | 7440-69-9 |
Bismuth Sulfide Powder
Product | Bismuth Sulfide Powder |
CAS No. | 1345-07-9 |
Appearance | Powder |
Purity | 99.9% |
APS | 1 – 5 microns (can be customized) |
Ingredient | Bi2S3 |
Product Code | NCZ-AE-229 |