Carbon Aluminum Nitride Powder
Carbon Aluminum Nitride Powder
Product Name: Carbon Aluminum Nitride Powder
| Product Name | Carbon Aluminum Nitride Powder |
| Stock No | NCZ-NSC300/20 |
| CAS No | 24304-00-5 |
| Purity | 99.9% |
| APS | 1-3µm (Can be customized) |
| Molecular Formula | AlN |
| Form | Powder |
| Color | White Powder |
| Melting Point | 2200 °C |
| Molar mass | 40.9882 |
Carbon Aluminum Nitride Powder Description:
Aluminum Nitride Powder is a solid nitride of aluminum. It has a high thermal conductivity of up to 285 W/(m·K) and is an electrical insulator.
Its wurtzite phase (w-AlN) has a bandgap of ~6 eV at room temperature and has a potential application in optoelectronics operating at deep ultraviolet frequencies.
Epitaxially grown thin-film crystalline aluminum nitride is used for surface acoustic wave sensors (SAWs) deposited on silicon wafers because of AlN's piezoelectric properties.
One application is an RF filter that is widely used in mobile phones, which is called a thin film bulk acoustic resonator (FBAR).
This is a MEMS device that uses aluminum nitride sandwiched between two metal layers. AlN is also used to build piezoelectric micromachined ultrasound transducers, which emit and receive an ultrasound, and which can be used for in-air range finding over distances of up to a meter. Metallization methods are available to allow AlN to be used in electronics applications similar to those of alumina and beryllium oxide.
AlN nanotubes as inorganic quasi-one-dimensional nanotubes, which are isoelectronic with carbon nanotubes, have been suggested as chemical sensors for toxic gases.
Currently, there is much research into developing light-emitting diodes to operate in the ultraviolet using gallium nitride-based semiconductors and, using the alloy aluminum gallium nitride, wavelengths as short as 250 nm have been achieved.
In 2006, an inefficient AlN LED emission at 210 nm was reported.
Carbon Aluminum Nitride Powder Related Information:
Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please contact us for customization and price inquiry Email: contact@nanochemazone.com Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Carbon Coated Copper Nanoparticles
Carbon Coated Copper Nanoparticles
Product Name: Carbon Coated Copper Nanoparticles (Cu, Purity: >99%, APS: ~25 nm)
| Product | Carbon Coated Copper Nanoparticles |
| Cat No | NCZ-MN-059/20 |
| CAS | 7440-50-8 |
| Purity | >99% |
| APS | ~25 nm (Can be Customized) |
| Molecular Formula | Cu/C |
| Form | Powder |
| Color | Grey to Black |
| Density | 8.92 g/cm³ |
| Melting Point | 1084.6 °C |
| Boiling Point | 2562 °C |
| Solubility | Insoluble in water |
Carbon Conductive Ink
| MF: | C |
| Chemical Name: |
Carbon Conductive Ink |
| Purity: | > 99.99% |
| APS: | 80-100 nm (Size Customization possible) |
| Form: | Ink |
| Product Number: | NCZD1601 |
| CAS Number | 7440-44-0 |
Carbon COOH QDs
| Composition: | Carbon COOH QDs (C, Surface Modified) |
| Appearance: | Blue |
| PL peak: | <515-525 nm (reference only, actual value may vary) |
| Particle Size: | 1-10 nm |
| Concentration: | 1 mg/ml (available up to 20 mg/ml) |
| Solution: | Water / organic solvents |
| Purity: | >99.9% |
Carbon Doped Boron Nitride Nanotubes
Carbon Doped Boron Nitride Nanotubes
Product Name: Carbon Doped Boron Nitride Nanotubes (SWCNT, 99%, Dia: < 5nm, Length: 20-30um)
| Product |
Carbon Doped Boron Nitride Nanotubes |
| Cat No | NCZ-NSC808/20 |
| CAS No | 308068-56-6 |
| Purity | >99% (SWCNT) |
| HS Code | 38119000 |
| Bulk density | 0.05-0.17 g/cm³ |
| Real density | 2-3 g/cm³ |
| SSA | 350-450* m²/g |
| Amorphous carbon | 1% |
| Residue ( calcination in air) | < 1% |
| Charging | 2180 (Capacity: mA h/g) |
| Discharging | 534 (Capacity: mA h/g) |
| Volume Resistivity | 0.1-0.15 Ω.cm (measured at pressure in powder) |
| Formula | CBN |
Related Information
Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please contact us for customization and price inquiry Email: contact@nanochemazone.com Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Carbon Graphene Screen Print Ink Paste
Carbon Graphene Screen Print Ink
Carbon Graphene Paste
NanoChemazone provides a wide range of carbon-graphite working electrodes Screen Printing Paste for all forms of electrochemical analysis including cyclic voltammetry, chronoamperometry, and potentiometric methods. The paste is highly thixotropic which gives it very good definition on printing. Product Benefits:- Low coefficient of variation (CV%).
- This product has no significant hazardous materials.
- It gives excellent electrochemical performance with good reversibility when using cyclic voltammetry.
| MF: | C |
| Chemical Name: | Graphene Carbon Ink, Graphene Carbon Paste |
| Purity: | >99.99% |
| Molecular Weight | 12.01 |
| Product Number: | NCZ-SPI-102 |
| Form: | Ink/Paste |
| CAS Number: | 7782-42-5 |
| Storage | 15ºC to 25ºC |
| Substrate | Suitable for polymeric such as PET, PBT, PVC, or Ceramic |
| Solids Content at 130°C | 34.0 - 35.0% (Customizable) |
| Viscosity Haake RS1 C20/2º TiL at 230 sec-1 at 25°C. | 5.5 – 7.5 Pa s(Customizable) |
Carbon Mesoporous Nanopowder
Carbon Mesoporous Nanopowder
Product Name: Carbon Mesoporous Nanopowder (C, Purity: >99.9%, APS: < 100nm)
| Product | Carbon Mesoporous Nanopowder |
| Cat No | NCZ-MN-160/20 |
| CAS No | 1333-86-4 |
| Purity | >99.9% |
| APS | < 100 nm |
| Molecular Formula | C |
| Molecular Weight | 12.01 |
| Form | Powder |
| Color | Black |
| Density | 1-2.1 g/cm³ |
| Melting Point | 3654 °C |
| Boiling Point | 4827 °C |
| SSA | >500 m2/g (BET) |
| Vapor pressure | 1 mm Hg @ 3586C |
| Solubility | Soluble in Water |
Carbon Micro Powder
Carbon Micro Powder
Product Name: Carbon Micro Powder (C, Purity: 99.9%, APS: 2-12 µm)
| Product | Carbon Micro Powder |
| Cat No | NCZ-MN-161/20 |
| CAS No | 7440-44-0 |
| Purity | 99.9% |
| APS | 2-12µm |
| Molecular Formula | C |
| Molecular Weight | 12.01g/mol |
| Form | Powder |
| Color | Black |
| Density | 2.2g/cm³ |
| Melting Point | 3652-3697 ºC |
| Boiling Point | 4200 ºC |
| Thermal Conductivity | 119-165 W/m/ |
| Solubility | Soluble in Water |
Carbon Nano Fiber Dispersion organic solvent
| MF: | C |
| Chemical Name: | Carbon nanofiber Dispersion |
| Purity: | >95% |
| APS: | 500-600nm (Size Customization possible) |
| Form: | Dispersion |
| Product Number: | NCZD1702 |
| CAS Number | 7782-42-5 |
Carbon Nanofiber Dispersion in Water
| MF: | C |
| Chemical Name: | Carbon Nanofiber Dispersion in Water |
| Purity: | > >95% |
| APS: | 500-600nm (Size Customization possible) |
| Form: | Dispersion |
| Product Number: | NCZD1701 |
| CAS Number | 7782-42-5 |
Carbon Nanofibers (CNFs)
Carbon Nanofibers (CNFs)
| Formula | C |
| Stock No. | NCZM108-19 |
| Length | < 50 microns (Customization available) |
| OD | 200-600 nm |
| CAS Number | 308068-56-6 |
| Purity | ≥99% |
| SSA | 18 m2/g |
| Tap density | 0.0431 g/cm3 |
| Ash content | < 5wt% |
| Electric Conductivity | >100s/cm |
| True density | ~2.1 g/cm3 |
Carbon Nanopowder
Carbon Nanopowder
Activated Carbon Nanoparticles
Nano Activated carbon powder
| MF: | C |
| Chemical Name: | Carbon |
| Purity: | > 99.99% |
| APS: | 20 nm (Size Customization possible) |
| Form: | Nanopowder |
| Product Number: | #NCZ1301 |
| CAS Number | 7440-44-0 |
Carbon Screen Print Paste and Ink
Carbon Screen Print Ink, Carbon Screen Print Paste
NanoChemazone provide a wide range of carbon-graphite working electrodes Screen Printing Paste for all forms of electrochemical analysis including cyclic voltammetry, chrono-amperometry and potentiometric methods. The paste is highly thixotropic which gives it very good definition on printing. Product Benefits:- Low coefficient of variation (CV%).
- This product has no significant hazardous materials.
- It gives excellent electrochemical performance with good reversibility when using cyclic voltammetry.
| MF: | C |
| Chemical Name: | Carbon Graphite Ink, Carbon Paste |
| Purity: | >99.99% |
| Molecular Weight | 12.01 |
| Product Number: | NCZ-SPI-101 |
| Form: | Ink/Paste |
| CAS Number: | 7782-42-5 |
| Storage | 15ºC to 25ºC |
| Substrate | Polyester, PVC, Polycarbonate or ceramic |
| Solids Content at 130°C | 39.0 - 43.0% (Customizable) |
| Viscosity Haake RS1 C20/2º TiL at 230 sec-1 at 25°C | 3.1 - 5.8 Pa s (Customizable) |
Carboxylated Graphene Quantum Dots
| Product Number | NCZC3003 |
| CAS Number | 7440-40-0 |
| Concentration | 1mg/mL to 20 mg/mL (in stock), Concentration Customization is Possible |
| Carrier | Water, Ethanol, IPA, NMP, Toluene, Methanol, Dispersion Customization is Possible |
| APS | 5-10 nm (Customization is Possible) |
| Package Size | 1-100 mL (Customization is Possible) |
| Composition: |
Carboxylated Graphene Quantum Dots |
| Appearance: | Colorless solution |
| PL peak: | 480 nm (reference only, the actual value may vary) |
| Particle Size: | ＜10 nm |
| Concentration: | 1 mg/ml (available up to 20 mg/ml) |
| Solution: | Water, Toluene (customization possible) |
| Purity: | >99.9% |
Cationic Polyacrylamide
Cationic Polyacrylamide
Product Name: Cationic Polyacrylamide (Purity: 99.9%, APS: 40-50 µm, C-PAM for short)
| Product |
Cationic Polyacrylamide |
| Cat No | NCZ-NSC909/20 |
| CAS No | 9003-05-8 |
| APS | 40-50 µm (Can be customized) |
| Purity | 99.9% |
| Molecular Formula | C3H5NO |
| Molecular Weight | 3-16 Million (adjustable) |
| Color | off-white |
| pH | 4-9 |
| Solid Content | ≥88 % |
| Degree of Hydrolysis | Low, Medium, High |
| Dissolution Time | ≤1hour |
| Hydrolysis degree | 20-23% |
| Recommended Dissolution Concentration | 0.1 - 0.3% |
Related Information
Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please contact us for customization and price inquiry Email: contact@nanochemazone.com Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
CdSe ZnS Quantum Dots
| Product | CdSe ZnS Quantum Dots |
| Stock No. | NCZQD101-19 |
| CAS | 1306-25-8 |
| APS | < 5nm (customization available) |
| Linear Formula | CdSe/ZnS |
| Colour | Blue |
| Form | Liquid |
| Fluorescence | λem 485 nm |
| Concentration | 5 mg/mL (customization available) |
| Density | 0.866 g/mL at 20 °C(lit.) |
| Dispersing Agent | Toluene/Aliphatic Amine |
| Storage Temperature | 2-8 °C |
| Dots Type | Core Shell Type Quantum Dots |
CdTe SiO2 Core Shell Nanoparticles
Cadmium Telluride Silica Core Shell Nanoparticles
| MF: | CdTe/SiO2 |
| Chemical Name: | Cadmium Tellurium Silica Core Shell Nanoparticles |
| Purity: | >99.99% |
| APS: | 80-100 nm (Size Customization possible) |
| Form: | Nanopowder/Nanodispersion |
| Product Number: | NCZCS106 |
Cellulose Nanoparticles
Cellulose Nanoparticles
Product Name: Cellulose Nanoparticles ((C6H10O5)n, Purity: 99.9%, Lateral Dimension: 80-100nm)
| Product |
Cellulose Nanoparticles |
| Cat No | NCZ-MN-114/20 |
| CAS No | 9004-34-6 |
| Purity | 99.9% |
| Molecular Formula | (C6H10O5)n |
| Form | Powder |
| Color | White |
| Loss on drying | 10% Max |
| pH | 5.5 - 7.5 |
| Solubility | Insoluble In Water |
Related Information
Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please contact us for customization and price inquiry Email: contact@nanochemazone.com Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Cerium (Ce) Micron Powder
| Product Number | NCZ-RE-101-19 |
| PURITY | 99.5 % |
| PARTICLE SIZE | 325 mesh |
| MELTING POINT | 799 °C |
| BOILING POINT | 3426 °C |
| DENSITY | 6.657 gm/cc |
| FORM | Powder |
| ELECTRIC RESISTIVITY | 75.0 micro ohm-cm @ 25 °C |
Note: We can manufacture and supply different particle sizes (Nano size range, Micron, Submicron, and different Mesh size) products of Alloy powders (Multi-Element, Multi-Element Oxide and Mixture of Rare Earth Elements) according to client’s requirements. Kindly ask for the customization in size and Element ratio composition.
Cerium Acetylacetonate
Cerium Acetylacetonate
| Product |
Cerium Acetylacetonate |
| CAS No. | 206996-61-4 |
| Appearance | Yellow |
| Purity | 99% |
| APS | 1-5 µM(Can be customized) |
| Ingredient | Ce(C5H7O2)3:x-H2O |
| Product Code | NCZ-NSC573/20 |
| Molecular Weight | 437.44 g/mol |
| Density | 1.72 g/cm³ |
| Melting Point | 175ºC (347°F) (decomposes) |
Cerium Acetylacetonate Description
Cerium Acetylacetonate Hydrate is a Cerium source that is soluble in organic solvents as an organometallic compound (also known as metalorganic, organo-inorganic and metallo-organic Acetylacetonate Packaging, Lab Quantitycompounds). The high purity acetylacetonate anion complexes by bonding each oxygen atom to the metallic cation to form a chelate ring; because of this property, acetylacetonates are commonly used in various catalysts and catalytic reagents for organic synthesis, including.
The fabrication of various shapes of carbon nanostructures (as demonstrated by a 2013 experiment by researchers at the Leibniz Institute for Solid State and Materials Research Dresden) via the use of chemical vapor deposition (CVD) and laser evaporation techniques.
Cerium Acetylacetonate Hydrate is one of numerous organo-metallic compounds (also known as metalorganic, organo-inorganic and Metallo-organic compounds) sold by nanochemazone. Similar results can sometimes also be achieved with Nanoparticles and by thin film deposition. Note nanochemazone additionally supplies many materials as solutions.
Nanochemazone produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information is available as is a Reference Calculator for converting relevant units of measurement..
Related Information
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Cerium Ammonium Nitrate Tetrahydrate Powder
Cerium Ammonium Nitrate Tetrahydrate Powder
Product Name: Cerium Ammonium Nitrate Tetrahydrate Powder
| Product | Cerium Ammonium Nitrate Tetrahydrate Powder |
| CAS No. | 13083-04-0 |
| Appearance | White Powder |
| Purity | 99.9% |
| APS | 1 – 5 Microns (Can be customized) |
| Ingredient | (NH4)2Ce(NO3)5•4H2O |
| Product Code | NCZ-NSC-262/20 |
Description:
A useful oxidant for organic synthesis. This chemical is also useful for the synthesis of quinoxaline derivatives which are useful as DNA cleaving agents, dyes, and organic semiconductors. Used to release organic ligands from metal carbonyls. Whereby the metal is oxidized, Carbon monoxide is produced, and the organic ligand is released. RELATED INFORMATION Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please contact us for customization and price inquiry Email: contact@nanochemazone.com Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Cerium Ammonium Sulfate Dihydrate Powder
Cerium Ammonium Sulfate Dihydrate Powder
Product Name: Cerium Ammonium Sulfate Dihydrate Powder
| Product | Cerium Ammonium Sulfate Dihydrate Powder |
| CAS No. | 10378-47-9 |
| Appearance | Orange Powder |
| Purity | 99.9% |
| APS | 1 – 5 Microns (Can be customized) |
| Ingredient | (NH4)4Ce(SO4)4•2H2O |
| Product Code | NCZ-NSC-261/20 |
Cerium Ammonium Sulfate Dihydrate Powder Description:
Ammonium cerium sulfate dihydrate is an oxidizing agent in organic synthesis and it is used as an analytical reagent, in thin-layer chromatography for the detection of anti-depressant drugs in human blood and urine samples. It is used to wet etch the Co catalyst and synthesis of carbon Nanotubes. It is used in the medical and pharmaceutical industries. RELATED INFORMATION Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please contact us for customization and price inquiry Email: contact@nanochemazone.com Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Cerium Carbonate Powder
Product Name: Cerium Carbonate Powder
| Product |
Cerium Carbonate Powder |
| Colour | White solid |
| Purity | ≥ 99.9% |
| Particle size | 1-10 µM (customizable) |
| Ingredient/MF | Ce2(CO3)3 |
| Product Code | NCZ-CR-132/20 |
| CAS Number | 537-01-9 |
Cerium Chloride Anhydrous Powder
Cerium Chloride Anhydrous Powder
Product Name: Cerium Chloride Anhydrous Powder
| Product | Cerium Chloride Anhydrous Powder |
| Colour | White |
| Purity | ≥ 99.9% |
| Particle size | 1-10 µM (customizable) |
| Ingredient/MF | CeCl3 |
| Product Code | NCZ-CR-126/20 |
| CAS Number | 7790-86-5/18618-55-8 |
Cerium Chloride Anhydrous Application:
1. It is mainly used in the pharmaceutical industry, for instance, to produce the intermediates of Montelukast. 2. It can be used as the reagent to promote the nucleophilic addition of Grignard reagents (1) to ketones (2) for the synthesis of tertiary alcohols 3.Used as a catalyst in Grignard reactions 4.Used to produce Cerium Octoate 5. It is used for producing Cerium metal 6. Coating inorganic pigments (ultramarine and bronze powder) with dense amorphous silica required Anhydrous CeCl3 7. Inkjet recording medium and ink jet recording method requires Cerium Chloride Anhydrous 8. Method of producing thermoelectric materials uses Anhydrous CeCl3 9.Cerium trichloride itself as a Lewis acid, for example as a catalyst in Friedel-Crafts alkylation reactions. 10.Application of anhydrous CeCl3 of the preparation of Organocerium (III) reagents 11.Use in water treatment: Phosphorus Control Products 12.Application of Cerium Chloride Anhydrous to improve the acid resistance of dentine 13. Activated coke impregnated with Anhydrous CeCl3 used for elemental mercury removal from simulated flue gas Please email us for the customization. Email: contact@nanochemazone.com Please contact us for customization and price inquiry Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Cerium Doped Lutetium Oxyorthosilicate
Cerium Doped Lutetium Oxyorthosilicate
Product Name: Cerium Doped Lutetium Oxyorthosilicate (Lu2SiO5(Ce), Purity: 99.9%, APS: 40-60µm)
Product |
Cerium Doped Lutetium Oxyorthosilicate |
| Cat No | NCZ-NSC809/20 |
| Purity | 99.9% |
| APS | 40-60µm |
| Molecular Formula | Lu2SiO5(Ce) |
| Density | 7.4g/cc |
| Relat. Light Intensity | 75 |
| Refraction | 1.82 |
Cerium Doped Lutetium Oxyorthosilicate Related Information
Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please contact us for customization and price inquiry Email: contact@nanochemazone.com Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Cerium Fluoride Powder
Cerium Fluoride Powder
Product Name: Cerium Fluoride Powder
| Product | Cerium Fluoride Powder |
| Colour | White |
| Purity | ≥ 99.9% |
| Particle size | 1-10 µM (customizable) |
| Ingredient/MF | CeF3 |
| Product Code | NCZ-CR-127/20 |
| CAS Number | 7758-88-5 |
Cerium Fluoride Powder Application:
- Cerium (III) fluoride is used to make Lewis acid
- It is considered to be the most effective glass polishing agent for high precision optical polishing.
- Cerium fluoride used as a core additive to improve the properties of the eventual weld.
- The fluoride provides stability to the arc and also modifies the behavior of the molten metal flowing into the weld
Cerium Molybdenum oxide Powder
Product Name: Cerium Molybdenum Oxide Powder
| Product |
Cerium Molybdenum Oxide Powder |
| CAS No. | 13454-70-1 |
| Appearance | Brown Powder |
| Purity | 99.9% |
| APS | 1 – 5 Microns (Can be customized) |
| Ingredient | Ce2(MoO4)3 |
| Product Code | NCZ-NSC-302/20 |
Description:
Cerium molybdenum oxide is used in the aerospace and coating industries.Related Information
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature. Please contact us for customization and price inquiry Email: contact@nanochemazone.com Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Cerium Niobium Oxide Dispersion
Cerium Niobium Oxide Dispersion
| Product |
Cerium Niobium Oxide Dispersion |
| CAS No. | 1306-38-3 12014-56-1 |
| Appearance | Black Powder |
| Purity | 99.9% |
| APS | 30 nm (Can be customized) |
| Ingredient | Ce /Nb2O5 |
| Product Code | NCZ-NSC426/20 |
Niobium Cerium Oxide Dispersion Description:
Niobium, also known as columbium, is a chemical element with the symbol Nb (formerly Cb) and atomic Niobium is a light grey, crystalline, and ductile transition metal. Pure niobium has a Mohs hardness rating similar to that of pure titanium, and it has similar ductility to iron.
Niobium oxidizes in the earth's atmosphere very slowly, hence its application in jewelry as a hypoallergenic alternative to nickel. Niobium is often found in the minerals pyrochlore and columbite, hence the former name "columbium". Its name comes from Greek mythology, specifically Niobe, who was the daughter of Tantalus, the namesake of tantalum.
The name reflects the great similarity between the two elements in their physical and chemical properties, making them difficult to distinguish. Niobium is used mostly in alloys, the largest part in special steel such as that used in gas pipelines.
Although these alloys contain a maximum of 0.1%, the small percentage of niobium enhances the strength of the steel. The temperature stability of niobium-containing superalloys is important for its use in jet and rocket engines. Niobium is used in various superconducting materials.
These superconducting alloys, also containing titanium and tin, are widely used in the superconducting magnets of MRI scanners. Other applications of niobium include welding, nuclear industries, electronics, optics, numismatics, The room temperature form of NbO2 has a tetragonal, rutile-like structure with short Nb-Nb distances, indicating Nb-Nb bonding. The high temperature form also has a rutile-like structure with short Nb-Nb distances.
Two high-pressure phases have been reported one with a rutile-like structure, again with short Nb-Nb distances, and a higher pressure with baddeleyite-related structure. NbO2 is insoluble in water and is a powerful reducing agent, reducing carbon dioxide to carbon and sulfur dioxide to sulfur. In an industrial process for the production of niobium metal, NbO2 is produced as an intermediate, The NbO2 is subsequently reacted with magnesium vapor to produce niobium metal.
Related Information
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Cerium Nitrate Powder
Cerium Nitrate Powder
Product |
Cerium Nitrate Powder |
| CAS No. | 10294-41-4 |
| Appearance | White |
| Purity | 99% |
| APS | 1-5 µM (Can be customized) |
| Ingredient | Ce(NO3)3 |
| Product Code | NCZ-AP-10047/20 |
| Molecular Weight | 434.12 |
| Density | N/A |
| Melting Point | 96℃ |
Cerium Nitrate Description
Cerium is added to the dominant catalyst for the production of styrene from methylbenzene to improve styrene formation. It is used in FCC catalysts containing zeolites to provide both catalytic reactivity in the reactor and thermal stability in the regenerator. In steel manufacturing, it is used to remove free Oxygen and Sulfur by forming stable oxysulfides and by tying up undesirable trace elements, such as lead and antimony.Related Information
Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please contact us for customization and price inquiry Email: contact@nanochemazone.com Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Cerium oxalate hydrate Powder
Product Name: Cerium oxalate hydrate Powder
| Product |
Cerium oxalate hydrate Powder |
| CAS No. | 15750-47-7 |
| Appearance | White Powder |
| Purity | 99.9% |
| APS | 1 – 5 Microns (Can be customized) |
| Ingredient | Ce2(C2O4)3•xH2O |
| Product Code | NCZ-NSC-300/20 |
Cerium oxalate hydrate Powder Description:
Cerium oxalate is used as an antiemetic. It has been identified as part of the invisible ink that was used by Stasi operatives during the Cold War.Cerium oxalate hydrate Powder Related Information
Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please contact us for customization and price inquiry Email: contact@nanochemazone.com Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Cerium Oxide (CeO2) Micron Powder
Cerium Oxide (CeO2) Micron Powder, Purity: 99.99%, Size: 325 mesh, White
Cerium Oxide (CeO2) Micron Powder
Purity: 99.99 %, Size: 325 mesh
Technical Properties:
| Product Number | NCZ-RE-116-19 |
| PURITY | Min. 99.99 % |
| COMPOSITION | Ce- 81.4, O- 18.6 |
| PARTICLE SIZE | 325 mesh |
| CAS | 1306-38-3 |
| DENSITY | 686 g/cm³ |
| BOILING POINT | 3468 °C |
| MELTING POINT | 2600 °C |
| MOHS HARDNESS @ 20ºC | 6 |
| COEFF. OF EXPANSION @ 20ºC | 8 x 10 ⁸ |
| ELECTRIC RESISTIVITY | 0.218 microhm-1 |
| CRYSTAL STRUCTURE | Cubic, Face Centered |
| FORM | Powder |
| APPLICATIONS | Lapping, Polishing |
Note: We can manufacture and supply different particle sizes (Nano size range, Micron, Submicron, and different Mesh size) products of Alloy powders (Multi-Element, Multi-Element Oxide and Mixture of Rare Earth Elements) according to client’s requirements. Kindly ask for the customization in size and Element ratio composition.
Cerium Oxide (CeO2) Nanopowder/Nanoparticles
Cerium Oxide (CeO2) Nanopowder/Nanoparticles, Purity: 99.975%, Size: 8-28 nm
Cerium Oxide (CeO2) Nanopowder/Nanoparticles
Purity: 99.975 %, Size: 8-28 nm
Technical Properties:
| Product Number | NCZ-RE-116A-19 |
| PURITY | 99.975 % |
| COLOR | LIGHT YELLOW |
| PARTICLE SIZE | 40 nm |
| Specific Surface Area (m2/g) | 35-55 |
| Bulk Density (g/cm3) | 0.95 |
| True Density (g/cm3) | 7,2 |
| Elemental Analysis (%) | |
| CaO | ≤0.005 |
| Fe2O3 | ≤0.002 |
| MgO | ≤0.001 |
| La2O3 | ≤0.008 |
| TiO2 | ≤0.001 |
Note: We can manufacture and supply different particle sizes (Nano size range, Micron, Submicron, and different Mesh size) products of Alloy powders (Multi-Element, Multi-Element Oxide and Mixture of Rare Earth Elements) according to client’s requirements. Kindly ask for the customization in size and Element ratio composition.
Cerium Oxide Nanoparticle Dispersion
| MF: | CeO2 |
| Chemical Name: | Cerium Oxide Dispersion |
| Purity: | >99.99% |
| APS: | 30-50 nm (Size Customization possible) |
| Form: | Nano dispersion |
| Product Number: | NCZD1801 |
| CAS Number | 1306-38-3 |
Cerium oxide nanoparticles
Cerium oxide Nanopowder
Cerium oxide Nanoparticles
Nano Cerium oxide Powder
| MF: | CeO2 |
| Chemical Name: | Cerium oxide |
| Purity: | > 99.99% |
| APS: | 20 nm (Size Customization possible) |
| Form: | Nanopowder |
| Product Number: | #NCZ1701 |
| CAS Number | 1306-38-3 |
Cerium Oxide Powder
| Product | Cerium Oxide Powder |
| CAS No. | 1306-38-3 |
| Appearance | Powder |
| Purity | 99.9% |
| APS | 1 – 5 microns (can be customized) |
| Ingredient | CeO2 |
| Product Code | NCZ-AE-188 |
Cerium Oxide Praseodymium
Cerium Oxide Praseodymium
Cerium Oxide Praseodymium
| Product |
Cerium Oxide Praseodymium |
| Colour | Solid |
| Purity | 99% |
| Particle Size | 1-5µM(customizable) |
| Ingredient/MF | CeO2 / Pr |
| Product Code | NCZ-CP-387/20 |
| CAS Number | N/A |
| Density | N/A |
| Melting point | N/A C |
| Boiling Point | N/A |
| Molecular Weight | N/A |
| Exact Mass | N/A |
Description
Cerium is a Block F, Group 3, Period 6 element with an atomic weight of 140.116. The number of electrons in each of cerium's shells is 2, 8, 18, 19, 9, 2 and its electron configuration is [Xe]4f2 6s2. The cerium atom has a radius of 182.5 pm and a Van der Waals radius of 235 pm. In its elemental form, cerium has a silvery white appearance.
Cerium is the most abundant of the rare earth metals. It is characterized chemically by having two valence states, the +3 cerous and +4 ceric states. The ceric state is the only non-trivalent rare earth ion stable in aqueous solutions. It is, therefore, strongly acidic and moderately toxic. It is also a strong oxidizer.
The cerous state closely resembles the other trivalent rare earths. Cerium is found in the minerals allanite, bastnasite, hydroxylbastnasite, monazite, rhabdophane, synchysite and zircon. Cerium was discovered by Martin Heinrich Klaproth, Jöns Jakob Berzelius, and Wilh elm Hisinger in 1803 and first isolated by Carl Gustaf Mosander in 1839. The element was named after the asteroid Ceres.
Praseodymium is a Block F, Group 3, Period 6 element with an atomic weight of 140.90765. The number of electrons in each of praseodymium's shells is 2, 8, 18, 21, 8, 2 and its electron configuration is [Xe]4f3 6s2. The praseodymium atom has a radius of 182 pm and a Van der Waals radius of 239 pm.
Praseodymium resembles the typical trivalent rare earths, however, it will exhibit a +4 state when stabilized in a zirconia host. Unlike other rare-earth metals, which show antiferromagnetic and / or ferromagnetic ordering at low temperatures, praseodymium is paramagnetic at any temperature above 1 K. Praseodymium is found in the minerals monazite and bastnasite.
Praseodymium was discovered by Carl Auer von Welsbach in 1885. The origin of the element name comes from the Greek words prasios didymos, meaning green twin.
Related Information
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Cerium Stearate Powder
Cerium Stearate Powder
| Product |
Cerium Stearate Powder |
| CAS No. | 1592-23-0 |
| Appearance | White Powder |
| Purity | 99.9% |
| APS | 1 – 5 Microns (Can be customized) |
| Ingredient | (C18H35COO)2Ce |
| Product Code | NCZ-NSC-152/20 |
Cerium Stearate Powder Description:
They are widely used as lubricants, slipping agents, heat-stabilizers, mold releasing agents, and accelerants in plastic, machinery engineering, rubber, paints and inks industry, etc.Cerium Stearate Powder RELATED INFORMATION
Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please email us for the customization. Email: contact@nanochemazone.com Note: We supply different size ranges of nano and micron size powder as per the client’s requirements and also accept customization in various parameters.
Cerium Vanadium Oxide Powder
Product Name: Cerium Vanadium Oxide Powder
| Product | Cerium Vanadium Oxide Powder |
| CAS No. | 13597-19-8 |
| Appearance | Yellow Powder |
| Purity | 99.9% |
| APS | 1 – 5 Microns (Can be customized) |
| Ingredient | CeVO4 |
| Product Code | NCZ-NSC-301/20 |
Cerium Vanadium Oxide Powder Description:
CeVO4 was developed as highly efficient biomimetic catalysts for the first time to detect H2O2.Related Information
Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please contact us for customization and price inquiry Email: contact@nanochemazone.com Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Cerium Zirconium Oxide Nano powder
Product Name: Cerium Zirconium Oxide Nanopowder
Cerium Zirconium Oxide Nanopowder
| Product | Cerium Zirconium Oxide Nanopowder |
| Colour | White |
| Purity | ≥ 99.99% |
| Particle size | 1-10 µM (customizable) |
| Ingredient/MF | CeO2.ZrO2 |
| Product Code | NCZ-CK-185/20 |
| CAS Number | 53169-24-7 |
Cesium Carbonate Fine Powder
Cesium Carbonate Fine Powder
Product Name: Cesium Carbonate Fine Powder (Cs2CO3, Purity: >99%, APS: 40-50 µm)
| Product |
Cesium Carbonate Fine Powder |
| Cat No | NCZ-NSC843/20 |
| CAS No | 534-17-8 |
| Purity | >99 % |
| APS | 40-50 µm (Can be customized) |
| Molecular Formula | Cs2CO3 |
| Molecular Weight | 325.82 g/mol |
| Form | Powder |
| Color | White Crystalline |
| Melting Point | 610 °C |
| Solubility in Water | 2605 g/L (15 °C) |
Related Information
Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please contact us for customization and price inquiry Email: contact@nanochemazone.com Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Cesium Chloride Fine Powder
Product Name: Cesium Chloride Fine Powder
| Product | Cesium Chloride Fine Powder |
| CAS No. | 7647-17-8 |
| Color | White |
| Purity | ≥ 99 % |
| APS | 80-100 nm (can be customised) |
| Ingredient | CsCl |
| Product Code | NCZ-MS-112 |
Cesium Selenide Powder
Cesium Selenide Powder
Product Name: Cesium Selenide Powder
| Product | Cesium Selenide Powder |
| Cat No | NCZ-NSC808/20 |
| CAS No | 31052-46-7 |
| Purity | >99.9 % |
| APS | 40-70µm |
| Molecular Formula | Cs2Se |
| Molecular Weight | 344.7709 g/mol |
| Form | Powder |
Cesium Selenide Description
Cesium Selenide is generally immediately available in most volumes. High purity, submicron and nanopowder forms may be considered. Nanochemazone produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information is available as is a Reference Calculator for converting relevant units of measurement.
Cesium Selenide Related Information
Storage Conditions:
Airtight sealed, avoid light, and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Cetrimonium Bromide Powder
Cetrimonium Bromide Powder
Product Name: Cetrimonium Bromide (CTAB) (CH3 (CH2)15N (Br) (CH3)3, Purity: >99%)
Product |
Cetrimonium Bromide |
| Cat No | NCZ-NSC844/20 |
| CAS No | 57-09-0 |
| Purity | >99% |
| Molecular Formula | (CTAB) (CH3 (CH2)15N (Br) (CH3)3 |
| Molecular Weight | 364.45 g/mol |
| Form | Solid |
| Color | White |
| Melting Point | 237 to 243 °C |
| Flash Point | 244 °C |
| pH | 5.0 – 7 |
| Odor | Ammoniacal (slight.) |
| Solubility | Soluble in water |
| APS | 1-5µM (Can be customized) |
Related Information
Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please contact us for customization and price inquiry Email: contact@nanochemazone.com Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Chalcone Powder
Product Name: Chalcone Powder
| Product | Chalcone |
| CAS No. | 94-41-7 |
| Color | Yellow |
| Purity | ≥ 99 % |
| APS | 80-100 nm (can be customised) |
| Ingredient | C15H12O |
| Product Code | NCZ-MS-113 |
Charcoal Powder
Charcoal Powder
Product Name: Charcoal Powder (C, APS: 60-70µm, Purity: 99.9%)
| Product | Charcoal Powder |
| Cat No | NCZ-MN-162/20 |
| CAS No | 7440-44-0 |
| Purity | 99.9% |
| APS | 60-70µm |
| Molecular Formula | C |
| Form | Powder |
| Color | Black |
| Bulk Density | 0.34g/ml |
Chitosan Nanoparticles
Chitosan Nanoparticles
Product Name: Chitosan Nanoparticles (C6H11NO4, Purity: >99.9%, APS: 80-100nm)
| Product |
Chitosan Nanoparticles |
| Cat No | NCZ-MN-116/20 |
| CAS | 9012-76-4 |
| Purity | >99.9% |
| APS | 80-100nm |
| Molecular Formula | C6H11NO4 |
| Molecular Weight | 161g/mol |
| Form | Powder |
| Color | White |
| Specific Gravity | 1.4 |
| Solubility | Soluble dilute aqueous acid |
Related Information
Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please contact us for customization and price inquiry Email: contact@nanochemazone.com Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Chitosan Powder
Product Name: Chitosan Powder
| Product | Chitosan |
| CAS No. | 9012-76-4 |
| Form | Powder |
| Purity | ≥ 99 % |
| APS | 80-100 nm (can be customised) |
| Ingredient (pH) | 7.0 – 9.0 |
| Product Code | NCZ-MS-114 |
Chromic Acid
Product Name: Chromic Acid
| Product | Chromic Acid |
| CAS No. | 7738-94-5 |
| Color | Dark Red Crystal Powder |
| Purity | ≥ 99 % |
| APS | 80-100 nm (can be customised) |
| Ingredient | CrH2O4 |
| Product Code | NCZ-MS-115 |
Chromium Carbide Cr3C2 Powder
Product Name: Chromium Carbide Cr3C2 Powder
| Product | Chromium Carbide |
| Colour | Gray Powder |
| Purity | ≥ 99.9% |
| Particle size | 1-10 µM (customizable) |
| Ingredient/MF | Cr3C2 |
| Product Code | NCZ-C-101/20 |
| CAS Number | 12012-35-0 |
Chromium Carbide Cr3C2 Powder APPLICATION FIELDS
Chromium Carbide Cr3C2 Powder is a ceramic compound that exists in several different chemical compositions: Cr3C2, Cr7C3, and Cr23C6. At standard conditions, it exists as a gray solid. It is extremely hard and corrosion-resistant. It is also a refractory compound, which means that it retains its strength at high temperatures as well. These properties make use as an additive to metal alloys. When chromium carbide crystals are integrated into the surface of a metal it improves the wear resistance and corrosion resistance of the metal and maintains these properties at elevated temperatures. Cr3C2 powder is mixed with solid nickel-chromium. This mixture is then heated to very high temperatures and sprayed onto the object being coated where it forms a protective layer. This layer is essentially its own metal matrix composite, consisting of hard ceramic Cr3C2 particles embedded in a nickel-chromium matrix. Cr3C2 prevents large grains from forming in the composite, which results in a fine-grained structure of superior toughness.Chromium Carbide Cr3C2 Application:
- Used as high temperature resistant and wear-resistant surface materials
- Used for welding and flux-cored wire
- Chromium carbide is useful in the surface treatment of metal components.
- Chromium carbide is used to coat the surface of another metal in a technique known as thermal spraying.
- Chromium carbide is used as an additive in cutting tools in order to improve toughness by preventing the growth of large grains.
Chromium Carbide Cr3C2 Properties:
There are three different crystal structures for chromium carbide corresponding to the three different chemical compositions. Cr23C6 has a cubic crystal structure and a Vickers hardness of 976 kg/mm2. Cr7C3 has a hexagonal crystal structure and a microhardness of 1336 kg/mm2. Cr3C2 is the most durable of the three compositions and has an orthorhombic crystal structure with a microhardness of 2280 kg/mm2. For this reason, Cr3C2 is the primary form of chromium carbide used in surface treatment. Please email us for the customization. Email: contact@nanochemazone.com Please contact us for customization and price inquiry Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Chromium carbide nanoparticles
Chromium Carbide Nanoparticles
Chromium Carbide Nanopowder
Nano Chromium Carbide Powder
| MF: | Cr3C2 |
| Chemical Name: | Chromium Carbide |
| Purity: | > 99.99% |
| APS: | 100 nm (Size Customization possible) |
| Form: | Nanopowder |
| Product Number: | #NCZ1501 |
| CAS Number | 12012-35-0 |
Chromium Carbide Nickel Chromium Alloy Nanopowder
| Product Formula | Cr3C2: Ni: Cr |
| Product Number | NCZ-A-122-19 |
| CAS Number | 12012-35-0/7440-02-0/7440-47-3 |
| Molecular Weight | 290.69 g/moL |
| APS | ≤ 80 nm (can be customized) |
| Purity | 99.9% |
| Color | Gray to Black/Brown |
| Form | Nanopowder |
Note: We can manufacture and supply different particle sizes (Nano size range, Micron, Submicron, and different Mesh size) products of Alloy powders (Multi-Element, Multi-Element Oxide and Mixture of Rare Earth Elements) according to client’s requirements. Kindly ask for the customization in size and Element ratio composition.
Chromium Carbide Powder
| Product | Chromium Carbide Powder |
| CAS No. | 12012-35-0 |
| Appearance | Powder |
| Purity | 99.9% |
| APS | 1 – 5 microns (can be customized) |
| Ingredient | Cr3C2 |
| Product Code | NCZ-AE-257 |
Chromium Chloride
Chromium Chloride
Product Name: Chromium Chloride (Cl2Cr, Purity: >99%, APS: -325)
| Product |
Chromium Chloride |
| Cat No | NCZ-NSC845/20 |
| CAS No | 10049-05-5 |
| Purity | >99% |
| APS | -325 mesh (Can be customized) |
| Molecular Formula | Cl2Cr |
| Molecular Weight | 122.90g/mol |
| Color | Dark Green to Grey |
| Density | 2.9g/ml at 25°C |
| Melting Point | 824°C |
| Boiling Point | 1303°C |
| Solubility | Soluble in Water, Insoluble in Alcohol and Ether |
Related Information
Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please contact us for customization and price inquiry Email: contact@nanochemazone.com Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Chromium Diboride Powder
Chromium Diboride Powder
| MF: | CrB2 |
| Chemical Name |
Chromium Diboride Powder |
| Appearance | Silver, Ceramic Material |
| EINECS | 234-499-3 |
| Purity: | 99.9% |
| Density: | 5.20 g/cm3 |
| Product Number: | NCZ-NCD-117/20 |
| Cas Number: | 12007-16-8 |
Chromium Diboride Powder
Chromium Diboride Powder
Product Name: Chromium Diboride Powder
| MF: | CrB2 |
| Chemical Name |
Chromium Diboride Powder |
| Appearance | silver, ceramic material |
| EINECS | 234-499-3 |
| Purity: | 99.9% |
| Density: | 5.20 g/cm3 |
| Product Number: | NCZ-NCD-117/20 |
| Cas Number: | 12007-16-8 |
Chromium Diboride Powder
Chromium Diboride Powder
Product Name: Chromium Diboride Powder
| Product | Chromium Diboride Powder |
| CAS No. | 12007-16-8 |
| Appearance | Grey Powder |
| Purity | 99.9% |
| APS | 1 – 5 Microns (Can be customized) |
| Ingredient | CrB2 |
| Product Code | NCZ-NSC-237/20 |
Description:
Chromium boride is been used in plasma technology and for high-performance electrodes in electron microscopes, metal matrix composites (MMCs), cutting tools, and cermets for machining aluminum. chromium diboride is recognized as offering superior performance in corrosive-wear environments. Chromium diboride thin films possess desirable combinations of properties, which are attractive for a wide range of potential industrial applications. RELATED INFORMATION Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please contact us for customization and price inquiry Email: contact@nanochemazone.com Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Chromium Erbium Oxide Dispersion
Product Name: Chromium Erbium Oxide Dispersion
| Product | Chromium Erbium Oxide Dispersion |
| CAS No. | 7440-47-3 |
| Appearance | Green Powder |
| Purity | 99.9% |
| APS | 30 nm(Can be customized) |
| Ingredient | Cr/Er2O3 |
| Product Code | NCZ-NSC429/20 |
Chromium Erbium Oxide Dispersion Description :
Chromium Oxide Nanopowder are used as a pigment in paints, inks, and glasses. It is used as a precursor for magnetic pigments (chromium dioxide). Chromium Erbium Oxide Dispersion is also used a thermal spray material for protecting the underlying metal surface, and as an additive to corrosion-resistant and wear-resistant materials. chromium Erbium Oxide Dispersionare used in coatings of bearings, seals, orifices, and valve seals The corundum structure, consisting of a hexagonal close-packed array of oxide anions with 2⁄3 of the octahedral holes occupied by chromium. Similar to corundum, Cr 2O3 is a hard, brittle material (Mohs hardness 8 to 8.5). It is antiferromagnetic up to 307 K, the Néel temperature.
Chromium Erbium Oxide Dispersion is not readily attacked by acids. Because of its considerable stability, chromium is a commonly used pigment. It was originally called viridian. It is used in paints, inks, and glasses. It is the colorant in "chrome green" and "institutional green." Chromium Erbium Oxide Dispersion is a precursor to the magnetic pigment chromium dioxide, by the following reaction. Along with many other oxides.
Chromium Erbium Oxide Dispersion is used as a compound when polishing (also called stropping) the edges of knives, razors, surfaces of optical devices, etc. on a piece of leather, balsa, cloth, or other material. It is available in powder or wax form, and in this context, it is known as "green compound". Unlike the classic thermite reaction involving iron oxides,
The chromium oxide thermite creates few or no sparks, smoke, or sound, but glows brightly. Because of the very high melting point of chromium, chromium thermite casting is impractical. Heating with chlorine and carbon yields chromium chloride and carbon monoxide.
Chromium Erbium Oxide Dispersion Related Information
Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please contact us for customization and price inquiry Email: contact@nanochemazone.com Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Chromium Europium Oxide Dispersion
Product Name: Chromium Europium Oxide Dispersion
| Product | Chromium Europium Oxide Dispersion |
| CAS No. | 7440-47-3 |
| Appearance | Green Powder |
| Purity | 99.9% |
| APS | 30 nm (Can be customized) |
| Ingredient | Cr+3/Eu2O3 |
| Product Code | NCZ-NSC435/20 |
Chromium Europium Oxide Dispersion Description
Chromium Europium Oxide Dispersion is a chemical element with the symbol Cr and atomic number 24. It is the first element in group 6. It is a steely-grey, lustrous, hard, and brittle transition metal. Chromium is the main additive in stainless steel, to which it adds anti-corrosive properties.
Chromium Europium Oxide Dispersion is also highly valued as a metal that is able to be highly polished while resisting tarnishing. Polished chromium reflects almost 70% of the visible spectrum, with almost 90% of infrared light being reflected.
The name of the element is derived from the Greek word χρῶμα, chrōma, meaning color, because many chromium compounds are intensely colored. Ferrochromium alloy is commercially produced from chromite by silicothermic or aluminothermic reactions and chromium metal by roasting and leaching processes followed by reduction with carbon and then aluminum.
Chromium Europium Oxide Dispersion is of high value for its high corrosion resistance and hardness. A major development in steel production was the discovery that steel could be made highly resistant to corrosion and discoloration by adding metallic chromium to form stainless steel.
Stainless steel and chrome plating (electroplating with chromium) together comprise 85% of the commercial use. The exchange bias phenomenon, which is assigned to the exchange coupling between the glassy-like shell and canted antiferromagnetic core, showed the opposite sign in CeCrO3 and EuCrO3 at low temperatures.
Suggesting different exchange interactions at the interfaces in these compounds. The energy level excitation of samples was examined by an inelastic neutron scattering which was in good agreement with the heat capacity data. Neutron scattering analysis of EuCrO3 was challenging due to the large neutron absorption cross-section of europium.
Chromium Europium Oxide Dispersion while none of the diffraction patterns could detect the magnetic ordering of the rare-earth ions in these samples
Chromium Europium Oxide Dispersion Related Product :
Eu2O3-Au Nanoparticles / Gold Europium Oxide Nanopowder 30nm 99.9% Eu2O3-Al Nanoparticles / Aluminum Europium Oxide Nanopowder 30nm 99.9% Eu2O3-Ag Nanoparticles / Silver Europium Oxide Nanopowder 30nm 99.9% Eu2O3-Cr Nanoparticles / Chromium Europium Oxide Nanopowder 30nm 99.9% Eu2O3-Nb Nanoparticles / Niobium Europium Oxide Nanopowder 30nm 99.9% Eu2O3-Pt Nanoparticles / Platinum Europium Oxide Nanopowder 30nm 99.9% Eu2O3-Pd Nanoparticles / Palladium Europium Oxide Nanopowder 30nm 99.9% Eu2O3-Ti Nanoparticles / Titanium Europium Oxide Nanopowder 30nm 99.9% Chromium Europium Oxide Dispersion Related Information Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please contact us for customization and price inquiry Email: contact@nanochemazone.com Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Chromium Gadolinium Oxide Dispersion
Product Name: Chromium Gadolinium Oxide Dispersion
| Product | Chromium Gadolinium Oxide Dispersion |
| CAS No. | 7440-47-3 |
| Appearance | Black Powder |
| Purity | 99.9% |
| APS | 30 nm (Can be customized) |
| Ingredient | Cr+3/Gd2O3 |
| Product Code | NCZ-NSC436/20 |
Chromium Gadolinium Oxide Nanopowder Dispersion Description
Chromium Gadolinium Oxide Dispersion is a chemical element with the symbol Gd and atomic number 64. Gadolinium is a silvery-white metal when oxidation is removed. It is only slightly malleable and is a ductile rare-earth element.
Chromium Gadolinium Oxide Dispersion reacts with atmospheric oxygen or moisture slowly to form a black coating. Chromium Gadolinium Oxide Dispersion below its Curie point of 20 °C (68 °F) is ferromagnetic, with an attraction to a magnetic field higher than that of nickel. Above this temperature, it is the most paramagnetic element. It is found in nature only in an oxidized form. When separated, it usually has impurities of the other rare-earths because of their similar chemical properties.
Chromium Gadolinium Oxide Dispersion possesses unusual metallurgical properties, to the extent that as little as 1% of gadolinium can significantly improve the workability and resistance to oxidation at high temperatures of iron, chromium, and related metals.
Chromium Gadolinium Oxide Dispersion as a metal or a salt absorbs neutrons and is, therefore, used sometimes for shielding in neutron radiography and in nuclear reactors. Like most of the rare earth.
Chromium Gadolinium Oxide Dispersion forms trivalent ions with fluorescent properties, and salts of gadolinium are used as phosphors in various applications. The kinds of gadolinium ions occurring in water-soluble salts are toxic to mammals.
However, chelated gadolinium compounds are far less toxic because they carry gadolinium through the kidneys and out of the body before the free ion can be released into the tissues. Because of its paramagnetic properties, solutions of chelated organic gadolinium complexes are used as intravenously administered gadolinium-based MRI contrast agents in medical magnetic.
Chromium Gadolinium Oxide Dispersion Related Product
Gd2O3-Au Nanoparticles / Gold Gadolinium Oxide Nanopowder 30nm 99.9% Gd2O3-Al Nanoparticles / Aluminum Gadolinium Oxide Nanopowder 30nm 99.9% Gd2O3-Ag Nanoparticles / Silver Gadolinium Oxide Nanopowder 30nm 99.9% Gd2O3-Cr Nanoparticles / Chromium Gadolinium Oxide Nanopowder 30nm 99.9% Gd2O3-Nb Nanoparticles / Niobium Gadolinium Oxide Nanopowder 30nm 99.9% Gd2O3-Pt Nanoparticles / Platinum Gadolinium Oxide Nanopowder 30nm 99.9% Gd2O3-Ti Nanoparticles / Titanium Gadolinium Oxide Nanopowder 30nm 99.9% Gd2O3-Pd Nanoparticles / Palladium Gadolinium Oxide Nanopowder 30nm 99.9%Chromium Gadolinium Oxide Nanopowder Dispersion Related Information
Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please contact us for customization and price inquiry Email: contact@nanochemazone.com Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Chromium Iron Powder
| Product | Chromium Iron Powder |
| CAS No. | 7440-47-3 |
| Appearance | Powder |
| Purity | 99.9% |
| APS | 1 – 5 microns (can be customized) |
| Ingredient | Cr-Fe |
| Product Code | NCZ-AE-223 |
Chromium Metal Organic Framework (Cr-MIL-100)
| Product Name |
Chromium Metal Organic Framework |
| Stock No. | NCZMOF103 |
| CAS | 7440-47-3 |
| Purity | 99% |
| APS | 30-40 µm |
| Molecular Formula | C18H6Cr3012 |
| Molecular Weight | 604.87g/ mol |
| Odour | Odorless |
| Color | Reddish brown |
| Density | 0.35g/ cm3 |
| Pore Size | ~10Å |
| SSA | ~3340 m2/g (BET) |
| Solubility | Ethanol |
| Application | Drug delivery materials: Ibuprofen |
| Linker | TMA, H3BTC, BTC (Trimesic acid) |
Chromium Metal Powder
Chromium Metal Powder
Product Name: Chromium Metal Powder
| Product | Chromium Metal Powder |
| Colour | Gray |
| Purity | ≥ 99.9% |
| Particle size | 1-10 µM (customizable) |
| Ingredient/MF | Cr |
| Product Code | NCZ-CR-128/20 |
| CAS Number | 7440-47-3 |
Chromium Metal Powder Description:
Chromium is a steel-Gray, lustrous, and hard metal that finds wide use as a catalyst or in alloys. All chromium compounds have intense and varied colors.Chromium Metal Powder Application:
1. Chromium is used as a hardener in steel, for the manufacture of stainless steel and many useful alloys. 2. It is also employed to give glass an emerald green color. Chromium does not oxidize in air, even in extreme moisture.- Chromium metal is also a fundamental ingredient in various types of super alloys which are essential to the aerospace and nuclear power industries
- Heavy chromate salt used for leather tanning, dyeing fabrics of impregnant, mordant, and all kinds of pigment.
Chromium MOF (Cr-MIL-101)
| Product Name |
Chromium MOF |
| Stock No. | NCZMOF112 |
| CAS | 7440-47-3 |
| Purity | 99% |
| APS | 30-40 µm |
| Molecular Formula | C18H6Cr3012 |
| Molecular Weight | 604.87 g/ mol |
| Odour | Odorless |
| Color | Green |
| Density | 0.35 g/ cm3 |
| Pore Size | ~10Å |
| SSA | ~1300 m2/g (BET) |
| Solubility | Ethanol |
| Application | Carbon dioxide and methane gas, Liquid adsorption |
| Linker | TMA, H3BTC, BTC (Trimesic acid) |
Chromium Nanoparticles
Chromium Nanopowder
Chromium Nanoparticles
Nano Chromium Powder
| MF: | Cr |
| Chemical Name: | Chromium |
| Purity: | > 99.99% |
| APS: | 20-50 nm (Size Customization possible) |
| Form: | Nanopowder |
| Product Number: | #NCZ1401 |
| CAS Number | 7440-47-3 |
Chromium Nitride Powder
| Product | Chromium Nitride Powder |
| CAS No. | 24094-93-7 |
| Appearance | Powder |
| Purity | 99.9% |
| APS | 1 – 5 Microns (Can be customized) |
| Ingredient | CrN |
| Product Code | NCZ-AE-111 |
Chromium Oxide Nanopowder
Chromium Oxide Nanoparticles
Chromium Oxide Nanopowder
Nano Chromium Oxide Powder
| MF: | Cr2O3 |
| Chemical Name: | Chromium Oxide |
| Purity: | > 99.99% |
| APS: | 50 nm (Size Customization possible) |
| Form: | Nanopowder |
| Product Number: | #NCZ1601 |
| CAS Number | 1308-38-9 |
Chromium Powder
| Product | Chromium Powder |
| CAS No. | 7440-47-3 |
| Appearance | Powder |
| Purity | 99.9% |
| APS | 1 – 5 Microns (Can be customized) |
| Ingredient | Cr |
| Product Code | NCZ-AE-114 |
Chromium Powder
Chromium Powder Nano and Micron particles size range
| MF: | Cr |
| Chemical Name: | Chromium Powder |
| Purity: | >c99.99% |
| APS: | 40-50 µm (Size Customization possible) |
| Form: | Micro powder |
| Product Number: | NCZM106 |
| CAS Number | 7440-47-3 |
Chromium Propylene Glycol Dispersion
Chromium Propylene Glycol Dispersion
| Product | Chromium Propylene Glycol Dispersion |
| CAS No. | 7440-47-3 |
| Appearance | Black Powder |
| Purity | 99.9% |
| APS | 40 nm (Can be customized) |
| Ingredient | Cr |
| Product Code | NCZ-NSC420/20 |
Chromium Propylene Glycol Dispersion Description:
Chromium Propylene Glycol Dispersion according to the National Library of Medicine and Agency for Toxic Substances and Disease Registry, is a synthetic liquid substance that absorbs water. It is labeled an organic compound in chemistry due to its carbon attributes. It is a viscous, colorless liquid, which is nearly odorless but possesses a faintly sweet taste. Containing two alcohol groups, it is classed as a diol.
Chromium Propylene Glycol Dispersion miscible with a broad range of solvents, including water, acetone, and chloroform. In general, glycols are non-irritating and have very low volatility. It is produced on a large scale primarily for the production of polymers. Propylene glycol is approved and used as a vehicle for topical, oral, and some intravenous pharmaceutical preparations. Final products contain 20% propylene glycol, 1.5% of di propylene glycol, and small amounts of other Chromium Propylene Glycol Dispersion. Further purification produces finished industrial grade or USP/JP/EP/BP grade propylene glycol that is typically 99.5% or greater. Use of USP (US Pharmacopoeia) propylene glycol can reduce the risk of Abbreviated New Drug Application (ANDA) rejection.
Chromium Propylene Glycol Dispersion can also be obtained from glycerol, a byproduct of the production of biodiesel. This starting material is usually reserved for industrial use because of the noticeable odor and taste that accompanies the final product.
Chromium Cr Propylene Glycol Dispersion Related Information
Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please contact us for customization and price inquiry Email: contact@nanochemazone.com Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Chromium Silicide Powder
Chromium Silicide Powder
Product Name: Chromium Silicide Powder
| Product |
Chromium Silicide Powder |
| CAS No. | 12018-09-6 |
| Appearance | White Powder |
| Purity | 99.9% |
| APS | 1 – 5 Microns (Can be customized) |
| Ingredient | CrSi2 |
| Product Code | NCZ-NSC-127/20 |
Chromium Silicide Powder
Chromium Silicide Powder
Product Name: Chromium Silicide Powder
| Product | Chromium Silicide Powder |
| Colour | Silver |
| Purity | ≥ 99.9% |
| Particle size | 1-10 µM (customizable) |
| Ingredient/MF | CrSi2 |
| Product Code | NCZ-CSI-153/20 |
| CAS Number | 12018-09-6 |
Chromium Silicide Powder Description:
Chromium Silicide is obtained through silicidation process. This material is insoluble in water and stays odourless is preferred for thermoplastic property as it is mechanically alloyed substance. It helps in increasing emission current and also in reducing onset voltage discharge resistance. It shows high electrical conductivity on material in which it is used. It shows isothermal and low temperature qualities and has excellent oxidation properties. We provide this product in powder form and it is available either in silver or black colour granuleChromium Silicide Powder Application:
- Used for fine ceramics raw material powder
- Used in the production of semiconductor thin film with crucible
- Used as membrane, coating glass, target materials, sputtering target material
- Widely applied for its potential properties in aerospace industry.
- It is also applied in plastic mould industry in combination with nickel.
Chromium Silicon Monoxide
Chromium Silicon Monoxide
| Product |
Chromium Silicon Monoxide |
| Colour | Brown |
| Purity | 99% |
| Particle Size | 1-5 µM (Customizable) |
| Ingredient/MF | CrSiO |
| Product Code | NCZ-CP-389/20 |
| CAS Number | 56488-64-3 |
| Density | N/A |
| Melting point | N/A |
| Boiling Point | N/A |
| Molecular Weight | 96.08 |
| Exact Mass | 95.912349 |
Related Information
Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please contact us for customization and price inquiry Email: contact@nanochemazone.com Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Chromium Silicon Oxide
Chromium Silicon Oxide
| Product |
Chromium Silicon Oxide |
| Colour | N/A |
| Purity | 99% |
| Particle Size | 1-5µM (Customizable) |
| Ingredient/MF | Cr4+- SiO2 |
| Product Code | NCZ-CP-392/20 |
| CAS Number | 21031-92-5 |
| Density | N/A |
| Melting point | N/A |
| Boiling Point | N/A |
| Molecular Weight | N/A |
| Exact Mass | N/A |
Chromium Silicon Oxide
Silicon is a Block P, Group 14, Period 3 element with an atomic weight of 28.085. The number of electrons in each of Silicon's shells is 2, 8, 4 and its electron configuration is [Ne] 3s2 3p2. The silicon atom has a radius of 111 pm and a Van der Waals radius of 210 pm.
Silicon was discovered and first isolated by Jöns Jacob Berzelius in 1823. Silicon makes up 25.7% of the earth's crust, by weight, and is the second most abundant element, exceeded only by oxygen. The metalloid is rarely found in pure crystal form and is usually produced from the iron-silicon alloy ferrosilicon. Silica (or silicon dioxide), as sand, is a principal ingredient of glass, one of the most inexpensive of materials with excellent mechanical, optical, thermal, and electrical properties.
Ultra high purity silicon can be doped with boron, gallium, phosphorus, or arsenic to produce silicon for use in transistors, solar cells, rectifiers, and other solid-state devices which are used extensively in the electronics industry.The name Silicon originates from the Latin word silex which means flint or hard stone.
Chromium:
Chromium is a Block D, Group 6, Period 4 element with an atomic weight of 51.9961. The number of electrons in each of Chromium's shells is 2, 8, 13, 1 and its electron configuration is [Ar] 3d5 4s1. Chromium was first discovered by Louis Nicolas Vauquelin in 1797. It was first isolated in 1798, also by Louis Nicolas Vauquelin.
The chromium atom has a radius of 128 pm and a Van der Waals radius of 189 pm. In its elemental form, chromium has a lustrous steel-gray appearance. Chromium is the hardest metal element in the periodic table and the only element that exhibits antiferromagnetic ordering at room temperature.
Above which it tranforms into a paramagnetic solid. The most common source of chromium is chromite ore (FeCr2O4). Due to its various colorful compounds, Chromium was named after the Greek word 'chroma' meaning color.
Related Information
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Citric Acid Powder
| Product | Citric Acid Powder |
| CAS No. | 77-92-9 |
| Form | Powder |
| Purity | ≥ 99 % |
| APS | 80-100 nm (can be customised) |
| Ingredient | C6H8O7 |
| Product Code | NCZ-MS-116 |
Clay Nanoparticles
Clay Nanoparticles
Product Name: Clay Nanoparticles (Purity: >99.9%, APS: < 80nm)
| Product |
Clay Nanoparticles |
| Cat No | NCZ-MN-117/20 |
| CAS No | 1332-58-7 |
| Purity | >99.9% |
| APS | < 80nm |
| Molecular Weight | 540.46g/mol |
| Crystal System | Monoclinic |
| Form | Powder |
| Color | White Cream |
| Density | 2.35g/cm³ |
| pH | 7-8.5 |
| Formula | Al2H4O9Si |
| Water Absorption | 270-440 % by weight |
| Oil Adsorption | 70-150 Gms oil/Gms |
| Softening Point | 1800 F or 980 C |
| Moisture | 1-3% |
| Refractive Index | 1.47 |
| SSA | 50-70m2/g |
Related Information
Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please contact us for customization and price inquiry Email: contact@nanochemazone.com Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Clay Nanopowder Montmorillonite
Clay Nanopowder Montmorillonite
Product Name: Clay Nanopowder Montmorillonite (Shelsite 93A Purity: 99.9%, APS: < 80nm)
| Product |
Clay Nanopowder Montmorillonite |
| Cat No | NCZ-MN-118/20 |
| Purity | 99.9% |
| APS | < 80nm |
| Color | Off-White |
| Density | 1.88g/cm3 |
| Formula | Al2H4O9Si |
| Hardness | 83 |
| Tensile | 101 MPa |
| Deflection temp | 96.0°C |
| Modulus of elasticity | 4.657 GPa |
| Flexural Modulus | 3.78 GPa |
| Surface modifier | Dihydrogenatedtallow ammonium |
| Elongation at Break | 8.0 % |
Clay Montmorillonite Related Information
Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please contact us for customization and price inquiry Email: contact@nanochemazone.com Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Clay Nanopowder Water Dispersion
Product Name: Clay Nanopowder Water Dispersion
| Product | Clay Water Dispersion |
| CAS No. | 1302-87-0 |
| Appearance | Yellow |
| Purity | 99.9% |
| APS | 18 nm (Can be customized) |
| Ingredient | Mg3Si2O5(OH)4 |
| Product Code | NCZ-NSC482/20 |
Clay Nanopowder Water Dispersion Description
Clay Water Dispersion material composed of hydrated aluminum oxide and silicon oxide that can be used as a drying agent. Bentonite is generally immediately available in most volumes, including bulk orders.
Ultra-high purity and high purity compositions improve both optical quality and usefulness as scientific standards. Nanoscale elemental powders and suspensions, as alternative high surface area forms, may be considered.
Nanochemazone produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards.
Typical and custom packaging is available, as is additional research, technical and safety (MSDS) data. Please contact us for information on lead time and pricing above.
Clay Nanopowder Water Dispersion Related Information
Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please contact us for customization and price inquiry Email: contact@nanochemazone.com Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Coating and membrane Grade Aluminum oxide nanowires
| Chemical Formula | Al2O3 |
| Product Name | Aluminium oxide nanowires |
| CAS Number | 1344-28-1 |
| Stock No. | NCZNW102-19 |
| Molar Mass | 101.96 g/mol |
| Density | 3.987g/cm3 |
| Melting point | 2,072 ˚C |
| Boiling Point | 78.24 ˚C |
| Diameter | 4 nm (Customization available) |
| Length | 1 µm (Customization available) |
Coating and Membrane Grade Titanium Oxide Nanowires
| Chemical Formula | TiO2 |
| Stock No. | NCZNW103-19 |
| Molar mass | 79.866 g/mol |
| Density | 4.23g/cm3 |
| Melting Point | 1,843 ˚C |
| Boiling point | 2,972 ˚C |
| CAS Number | 13463-67-7 |
| Diameter | 10 nm (customization available) |
| Length | 10 µm (customization available) |
Cobalt Acetone Dispersion
Cobalt Acetone Dispersion
| Product |
Cobalt Acetone Dispersion |
| CAS No. | 7440-48-4 |
| Appearance | Black Powder |
| Purity | 99.9% |
| APS | 28 nm (Can be customized) |
| Ingredient | Co |
| Product Code | NCZ-NSC419/20 |
Cobalt Nanopowder Acetone Dispersion:
About a third of the world's acetone is used as a solvent, and a quarter is consumed as acetone cyanohydrin, a precursor to methyl methacrylate. Acetone is a good solvent for many plastics and some synthetic fibers. It is used for thinning polyester resin, cleaning tools used with it, and dissolving two-part epoxies and superglue before they harden.
It is used as one of the volatile components of some paints and varnishes. As a heavy-duty degreaser, it is useful in the preparation of metal prior to painting or soldering, and to remove rosin flux after soldering, which helps to prevent the rusty bolt effect.
Although itself flammable, acetone is used extensively as a solvent for the safe transportation and storage of acetylene, which cannot be safely pressurized as a pure compound. Vessels containing a porous material are first filled with acetone followed by acetylene, which dissolves into the acetone. One liter of acetone can dissolve around 250 liters of acetylene at a pressure of 10 bar. Small amounts of acetone are produced in the body.
The decarboxylation of ketone bodies. Certain dietary patterns, including prolonged fasting and high-fat low-carbohydrate dieting, can produce ketosis, in which acetone is formed in body tissue. Certain health conditions, such as alcoholism and diabetes, can produce ketoacidosis, uncontrollable ketosis that leads to a sharp, and potentially fatal, increase in the acidity of the blood.
Since it is a byproduct of fermentation, acetone is a byproduct of the distillery industry. Acetone can be produced from the oxidation of ingested isopropanol, or from the spontaneous/enzymatic breakdown of acetoacetate (a ketone body) in ketotic individuals.
Related Information
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Cobalt Antimonide Thermoelectric
Cobalt Antimonide Thermoelectric
Product Name: Cobalt Antimonide Thermoelectric (Purity: >99%, APS: 20-30µm)
| Product |
Cobalt Antimonide Alloy |
| Cat No | NCZ-NSC846/20 |
| CAS No | 12052-42-5 |
| Purity | >99% |
| APS | 20-30µm (Can be customized) |
| Molecular Formula | CoSb |
| Molecular Weight | 180.69g/mol |
| Form | Powder |
| Color | Gray |
| Melting Point | 1202 °C |
| Solubility | Insoluble in water |
Related Information
Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please contact us for customization and price inquiry Email: contact@nanochemazone.com Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Cobalt Base Alloy Spherical
Cobalt Base Alloy Spherical
Product |
Cobalt-base Alloy Spherical |
| Colour | N/A |
| Purity | 99% |
| Particle size | 1-5μm (Customizable) |
| Ingredient/MF | Co-Cr-Mo |
| Product Code | NCZ-CP-292/20 |
| CAS No | N/A |
Cobalt Base Alloy Spherical Description
Cobalt is a chemical element with the symbol Co and atomic number 27. Like nickel, cobalt is found in the Earth's crust only in chemically combined form, save for small deposits found in alloys of natural meteoric iron. The free element, produced by reductive smelting, is a hard, lustrous, silver-gray metal.
Cobalt-based blue pigments (cobalt blue) have been used since ancient times for jewelry and paints, and to impart a distinctive blue tint to glass, but the color was later thought to be due to the known metal bismuth. Miners had long used the name kobold ore (German for goblin ore) for some of the blue-pigment-producing minerals; they were so named because they were poor in known metals, and gave poisonous arsenic-containing fumes when smelted. In 1735, such ores were found to be reducible to a new metal (the first discovered since ancient times), and this was ultimately named for the kobold.
Today, some cobalt is produced specifically from one of a number of metallic-lustered ores, such as cobaltite (CoAsS). The element is, however, more usually produced as a by-product of copper and nickel mining. The copper belt in the Democratic Republic of the Congo (DRC) and Zambia yields most of the global cobalt production. World production in 2016 was 116,000 metric tons (114,000 long tons; 128,000 short tons) (according to Natural Resources Canada), and the DRC alone accounted for more than 50%.[4]
Cobalt is primarily used in lithium-ion batteries, and in the manufacture of magnetic, wear-resistant and high-strength alloys. The compounds cobalt silicate and cobalt(II) aluminate (CoAl2O4, cobalt blue) give a distinctive deep blue color to glass, ceramics, inks, paints and varnishes. Cobalt occurs naturally as only one stable isotope, cobalt-59. Cobalt-60 is a commercially important radioisotope, used as a radioactive tracer and for the production of high-energy gamma rays.
Cobalt Base Alloy Spherical Related Information
Please email us for the customization.
Email: contact@nanochemazone.com
Please contact us for customization and price inquiry
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Cobalt Blue Liquid
Cobalt Blue Liquid
Product Name: Cobalt Blue Liquid (Co, Purity: 99.9%, APS: 60-70µm)
| Product | Cobalt Blue Liquid |
| Cat No | NCZ-MN-101/20 |
| CAS No | 12672-27-4 |
| Purity | 99.9% |
| APS | 60-70µm (Can be Customized) |
| Molecular Formula | Co |
| Molecular Weight | 181.88 |
| Form | Liquid |
| Color | Blue |
| Density | 4,1 kg/L (20 °C) |
| Bulk Density | 0,6 g/cm3 |
| pH | 7-9 |
| Solubility | Soluble in water |
Cobalt Carbide Powder
Product Name: Cobalt Carbide Powder
| MF: | Tr-Co |
| Chemical Name |
Cobalt Carbide Powder |
| Color | gray |
| APS (nm) | 30 |
| Purity: | 99.9% |
| Specific surface area(m2/g) | 40-60 |
| Product Number: | NCZ-NCO-112/20 |
| Cas Number: | 7440-48-4 |
| Crystal Form | Sphere |
Cobalt Carbide Powder RELATED INFORMATION
High-density magnetic recording materials: using nanometer cobalt powder record-high density and high coercive force (up to 119.4 KA/m), signal-to-noise ratio, and oxidation resistance as well as good, can significantly improve tapes and large capacity hard disk performance. Magnetic iron, cobalt, nickel alloy powder production of magnetic and outstanding performance, can be widely applied in medical apparatus and instruments, sealing damping, sound, light show. Please email us for the customization. Email: contact@nanochemazone.com Please contact us for customization and price inquiry Note: We supply different size ranges of nano and micron size powder as per the client’s requirements and also accept customization in various parameters.
Cobalt Carbonate AR Powder
| Product | Cobalt Carbonate AR Powder |
| CAS No. | 513-79-1 |
| Appearance | Powder |
| Purity | 99.9% |
| APS | 1 – 5 microns (can be customized) |
| Ingredient | CoCO3.xH2O |
| Product Code | NCZ-AE-251 |
Cobalt Chloride Hexahydrate Powder
| Product | Cobalt Chloride Hexahydrate Powder |
| CAS No. | 7646-79-9 |
| Appearance | Powder |
| Purity | 99.9% |
| APS | 1 – 5 Microns (Can be customized) |
| Ingredient | CoCl2.6H2O |
| Product Code | NCZ-AE-132 |
Cobalt Chromium Alloy Nanopowder
| Product Formula | Co: Cr |
| Product Number | NCZ-A-113-19 |
| CAS Number | 7440-48-4/7440-77-3 |
| Molecular Weight | 110.93 g/moL |
| APS | ≤ 80 nm (can be customized) |
| Purity | 99.9% |
| Color | Grayish |
| Form | Nanopowder |
| Density | 10.0 g/cm3 |
| Melting Point | 1330 °C |
| Boiling Point | 2100 °C |
Note: We can manufacture and supply different particle sizes (Nano size range, Micron, Submicron, and different Mesh size) products of Alloy powders (Multi-Element, Multi-Element Oxide and Mixture of Rare Earth Elements) according to client’s requirements. Kindly ask for the customization in size and Element ratio composition.
Cobalt Chromium Aluminum Yttrium Alloy Nanopowder
Co-Cr-Al-Y Alloy Nanoparticles/Nanopowder (Particle Size Less than ≤ 80 nm, 99.9%)
Cobalt Chromium Aluminum Yttrium Alloy Nanopowder
| Product Formula | Co: Cr: Al: Y |
| Product Number | NCZ-A-114-19 |
| Molecular Weight | 226.81 g/moL |
| APS | ≤ 80 nm (can be customized) |
| Purity | 99.9% |
| Color | Grayish |
| Form | Nanopowder |
Note: We can manufacture and supply different particle sizes (Nano size range, Micron, Submicron, and different Mesh size) products of Alloy powders (Multi-Element, Multi-Element Oxide and Mixture of Rare Earth Elements) according to client’s requirements. Kindly ask for the customization in size and Element ratio composition.
Cobalt Chromium Molybdenum Alloy Nanopowder
| MF: | Co:Cr:Mo |
| Chemical Name: |
Cobalt Chromium Molybdenum Alloy Powder |
| Purity: | > 99.99% |
| APS: | <80 nm (Size Customization possible) |
| Form: | Nanopowder |
| Product Number: | NCZA106 |
| CAS Number: | 12629-02-6 |
Cobalt Disilicide Powder
Cobalt Disilicide Powder
Product Name: Cobalt Disilicide Powder
Product |
Cobalt Disilicide Powder |
| CAS No. | 12017-12-8 |
| Appearance | Gray Powder |
| Purity | 99.9% |
| APS | 1 – 5 Microns (Can be customized) |
| Ingredient | CoSi2 |
| Product Code | NCZ-NSC-129/20 |
Cobalt Disilicide Powder RELATED INFORMATION
Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please email us for the customization. Email: contact@nanochemazone.com Note: We supply different size ranges of nano and micron size powder as per the client’s requirements and also accept customization in various parameters.
Cobalt Disulfide Powder
Product Name: Cobalt Disulfide
| Product |
Cobalt Disulfide |
| CAS No. | 12013-10-4 |
| Appearance | Black |
| Purity | 99% |
| APS | 1-5 µM (Can be customized) |
| Ingredient | CoS2 |
| Product Code | NCZ-NSC513/20 |
| Molecular Weight | 123.06 g/mol |
| Theoretical Density | 4.3 g/cm³ |
| Melting Point | 1,182°C (2,159.6°F) |
Cobalt Disulfide Description :
Cobalt Disulfide is a moderately water and acid soluble Cobalt source for uses compatible with sulfates. Disulfate compounds are salts or esters of sulfuric acid formed by replacing one or both of the hydrogens with a metal. Most metal sulfate compounds are readily soluble in water for uses such as water treatment, unlike fluorides and oxides which tend to be insoluble.
Organometallic forms are soluble in organic solutions and sometimes in both aqueous and organic solutions. Metallic ions can also be dispersed utilizing suspended or coated nanoparticles and deposited utilizing sputtering targets and evaporation materials for uses such as solar energy materials and fuel cells. Cobalt Disulfide is generally immediately available in most volumes. High purity, submicron and nanopowder forms may be considered.
Nanochemazone produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information is available as is a Reference Calculator for converting relevant units of measurement.
Cobalt Disulfide Related Information
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Market Focus: Lithium/Ion Batteries, High Purity Thin Film Coating, High Purity Fiber Optics, High Purity Crystal Growth
Cobalt doped Ti3AlC2 MXene powder
Product Name: Cobalt doped Ti3AlC2 MXene powder
Product Code: NCZ-MX-105-20B
| Product | Cobalt doped Ti3AlC2 MXene powder |
| Colour | Black Powder |
| Purity | ≥98 wt% |
| Ingredient | Co@Ti3AlC2, Also available other doping such as Fe, Mn, S (Ask for the customization) |
| CAS NO | 196506-01-1 |
Cobalt doped Ti3AlC2 MXene powder APPLICATION FIELDS:
High-temperature coating, Mxene precursor, conductive self-lubricating ceramic, lithium-ion battery, supercapacitor, electrochemical catalysis. RELATED INFORMATION Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please email us for the customization. Email: contact@nanochemazone.com
Cobalt Ethylene Glycol Dispersion
Cobalt Ethylene Glycol Dispersion
| Product |
Cobalt Ethylene Glycol Dispersion |
| CAS No. | 7440-48-4 |
| Appearance | Black Powder |
| Purity | 99.9% |
| APS | 28 nm (Can be customized) |
| Ingredient | Co |
| Product Code | NCZ-NSC418/20 |
Cobalt Glycol Ethylene Description
Metal nanopowder should be gently placed, avoiding violent vibration and friction. Metal nanopowder should be protected from moisture, heat, impact, and sunlight. The user must be a professional .This person must know how to use this product. The major use of ethylene glycol is as a medium for convective heat transfer in, for example, automobiles and liquid-cooled computers.
Ethylene glycol is also commonly used in chilled-water air-conditioning systems that either place the chiller or air handlers outside or must cool below the freezing temperature of water. In geothermal heating/cooling systems, ethylene glycol is the fluid that transports heat through the use of a geothermal heat pump.
The ethylene glycol either gains energy from the source (lake, ocean, water well) or dissipates heat to the sink, depending on whether the system is being used for heating or cooling. Pure ethylene glycol has a specific heat capacity about one half that of water. So, while providing freeze protection and an increased boiling point, ethylene glycol lowers the specific heat capacity of water mixtures relative to pure water. mix by mass has a specific heat capacity of about 3140 J/(kg·°C) (0.75 BTU/(lb·°F)), three quarters that of pure water, thus requiring increased flow rates in same-system comparisons with water.
The formation of large bubbles in cooling passages of internal combustion engines will severely inhibit heat flow (flux) from the area, so that allowing nucleation (tiny bubbles) to occur is not advisable. Large bubbles in cooling passages will be self-sustaining or grow larger, with a virtually complete loss of cooling in the area. With pure MEG (mono-ethylene glycol) the hot spot will reach 200 °C (392 °F). Cooling by other effects such as air draft from fans (not considered in pure nucleation analysis) will assist in preventing large-bubble formation.
Related Information
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Cobalt Ferrite Nanoparticles
Cobalt Iron Oxide Nanopowder
Cobalt Ferrite Nanoparticles
Nano Cobalt Iron Oxide/Cobalt Ferrite powder
| MF: | CoFe2O4 |
| Chemical Name: | Cobalt Iron Oxide/Cobalt Ferrite Nanoparticles |
| Purity: | > 99.99% |
| APS: | 30 nm (Size Customization possible) |
| Form: | Nanopowder |
| Product Number: | #NCZ1901 |
| CAS Number | 12052-28-7 |
Cobalt Ferrite Powder
Cobalt Ferrite Powder
Product Name: Cobalt Ferrite Powder (CoFe2O4, Purity: 99.9%, APS: 40-60µm)
| Product | Cobalt Ferrite Powder |
| Cat No | |
| CAS No | 12052-28-7 |
| Purity | 99.9% |
| APS | 40-60 µm (Can be Customized) |
| Molecular Formula | CoFe2O4 |
| Molecular Weight | 239.23 g/mol |
| Form | Powder |
| Density | 5.3 g/cm³ |
| Melting Point | >400 °C |
| Solubility | Insoluble in water |
Cobalt Hydroxide Powder
Product Name: Cobalt Hydroxide Powder
| Product |
Cobalt Hydroxide Powder |
| CAS No. | 21041-93-0 |
| Appearance | Gray Powder |
| Purity | 99.9% |
| APS | 1 – 5 Microns (Can be customized) |
| Ingredient | Co(OH)2 |
| Product Code | NCZ-NSC-121/20 |
Cobalt Hydroxide Powder DESCRIPTION:
Cobalt salt, cobalt catalyst, and electrolytic method for producing hydrogen peroxide decomposition agent in chemical production. Coating industry as paint driers. Used as a colorant, etc. Solution for the production of cobalt salt, cobalt catalyst, storage battery electrode, and paint drying agent; glass, enamel coloring, a cobalt compound, and drying agent for paint and varnish. RELATED INFORMATION Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please email us for the customization. Email: contact@nanochemazone.com Note: We supply different size ranges of nano and micron size powder as per the client’s requirements and also accept customization in various parameters.
Cobalt Iron Alloy Powder (Nano and Micron Particle Size)
| Product | Fe-Co |
| Size | 200 Mesh (Customisation is Possible) Also available in nano and micro size range |
| Product Number | NCZ-A-142 |
| Formula | Fe-Co |
| Product Details | Iron Cobalt powder |
| Ratio Fe-Co | 50:50 (Composition Customization is Possible) |
| Purity | ≥ 99% |
| Form | Powder |
Cobalt Iron Zinc Oxide
Cobalt Iron Zinc Oxide
| Product |
Cobalt Iron Zinc Oxide |
| Colour | Dark brown |
| Purity | 99% |
| Particle Size | 1-5µM (customizable) |
| Ingredient/MF | CoZnFe2O4 |
| Product Code | NCZ-CP-395/20 |
| CAS Number | N/A |
| Density | 5.2 g/cm3 |
| Melting point | N/A |
| Boiling Point | N/A |
| Molecular Weight | 300.01 |
| Exact Mass | 411.885 g/mol |
Cobalt Iron Zinc Oxide Description
Cobalt is a Block D, Group 9, Period 4 element with an atomic weight of 58.933195. The number of electrons in each of cobalt's shells is 2, 8, 15, 2 and its electron configuration is [Ar] 3d7 4s2The cobalt atom has a radius of 125 pm and a Van der Waals radius of 192 pm. Cobalt was first discovered by George Brandt in 1732. In its elemental form, cobalt has a lustrous gray appearance. Cobalt is found in cobaltite, erythrite, glaucodot and skutterudite ores.
Cobalt produces brilliant blue pigments which have been used since ancient times to color paint and glass. Cobalt is a ferromagnetic metal and is used primarily in the production of magnetic and high-strength superalloys. Co-60, a commercially important radioisotope, is useful as a radioactive tracer and gamma ray source. The origin of the word Cobalt comes from the German word "Kobalt" or "Kobold," which translates as "goblin," "elf" or "evil spirit.
Iron:
Iron is a Block D, Group 8, Period 4 element with an atomic weight of 55.845. The number of electrons in each of Iron's shells is 2, 8, 14, 2 and its electron configuration is [Ar] 3d6 4s2. The iron atom has a radius of 126 pm and a Van der Waals radius of 194 pm.
Iron was discovered by humans before 5000 BC. In its elemental form, iron has a lustrous grayish metallic appearance. Iron is the fourth most common element in the Earth's crust and the most common element by mass forming the earth as a whole.
Iron is rarely found as a free element, since it tends to oxidize easily; it is usually found in minerals such as magnetite, hematite, goethite, limonite, or siderite. Though pure iron is typically soft, the addition of carbon creates the alloy known as steel, which is significantly stronger.
Zinc:
Zinc is a Block D, Group 12, Period 4 element with an atomic weight of 65.38. The number of electrons in each of zinc's shells is 2, 8, 18, 2, and its electron configuration is [Ar] 3d10 4s2. The zinc atom has a radius of 134 pm and a Van der Waals radius of 210 pm.
Zinc was discovered by Indian metallurgists prior to 1000 BC and first recognized as a unique element by Rasaratna Samuccaya in 800. Zinc was first isolated by Andreas Marggraf in 1746. In its elemental form, zinc has a silver-gray appearance.
It is brittle at ordinary temperatures but malleable at 100 °C to 150 °C. It is a fair conductor of electricity, and burns in air at high red producing white clouds of the oxide. Zinc is mined from sulfidic ore deposits. It is the 24th most abundant element in the earth's crust and the fourth most common metal in use (after iron, aluminum, and copper). The name zinc originates from the German word "zin," meaning tin.
Related Information
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
COBALT MICRO POWDER
Cobalt Metal Powder
Cobalt Metal Powder Micron and nanoparticles size range
| MF: | Co |
| Chemical Name: | Cobalt Powder |
| Purity: | > 99.99% |
| APS: | 40-50 µm (Size Customization possible) |
| Form: | Micro powder |
| Product Number: | NCZM107 |
| CAS Number | 7440-48-4 |
Cobalt MicroPowder
Cobalt Micro Powder
Product Name: Cobalt Micro Powder
| Product | Cobalt Micro Powder |
| CAS No. | 7440-48-4 |
| Appearance | Black Powder |
| Purity | 99.9% |
| APS | 40-60µm, (Can be customized) |
| Ingredient | Co |
| Product Code | NCZ-NSC339/20 |
| Molecular weight | 92.95g/mol |
| Density | 3.5g/cm3 |
Cobalt Micro Powder Description:
Cobalt is a chemical element with the symbol Co and atomic number. Like nickel, cobalt is found in the Earth's crust only in chemically combined form, save for small deposits found in alloys of natural meteoric iron.
The free element, produced by reductive smelting, is a hard, lustrous, silver-gray metal. Cobalt-based blue pigments (cobalt blue) have been used since ancient times for jewelry and paints, and to impart a distinctive blue tint to glass, but the color was later thought to be due to the known metal bismuth.
Miners had long used the name for some of the blue-pigment-producing minerals; they were so named because they were poor in known metals, and gave poisonous arsenic-containing fumes when smelted. In 1735, such ores were found to be reducible to a new metal (the first discovered since ancient times), and this was ultimately named for the kobold.
Today, some cobalt is produced specifically from one of a number of metallic-lustered ores, such as cobaltite (CoAsS). The element is, however, more usually produced as a by-product of copper and nickel mining.
The copper belt in the Democratic Republic of the Congo (DRC) and Zambia yields most of the global cobalt production.
World production in 2016 was 116,000 tonnes (according to Natural Resources Canada), and the DRC alone accounted for more than 50%. Cobalt is primarily used in lithium-ion batteries, and in the manufacture of magnetic, wear-resistant and high-strength alloys.
The compounds cobalt silicate and cobalt(II) aluminate (CoAl2O4, cobalt blue) give a distinctive deep blue color to glass, ceramics, inks, paints, and varnishes. Cobalt occurs naturally as only one stable isotope, cobalt-59. Cobalt-60 is a commercially important radioisotope, used as a radioactive tracer and for the production of high-energy gamma rays.