Tantalum Powder
Tantalum Powder
Tantalum Powder nano and micro size range
| MF: | Ta |
| Chemical Name: | Tantalum Powder |
| Purity: | >99.99% |
| APS: | 40-50 µm (Size Customization possible) |
| Form: | Micro powder |
| Product Number: | NCZM124 |
| CAS Number | 7440-25-7 |
Tantalum Titanium Oxide
Tantalum Titanium Oxide
| Product |
Tantalum Titanium Oxide |
| Colour | Gray |
| Purity | 99% |
| Particle Size | 1-5 µM(Customizable) |
| Ingredient/MF | Ta2TiO7 |
| Product Code | NCZ-CP-386/20 |
| CAS Number | N/A |
| Density | 6.5 g/cm3 |
| Melting point | 1800 °C |
| Boiling Point | N/A |
| Molecular Weight | 521.76 |
| Exact Mass | N/A |
Tantalum Titanium Oxide Description
Tantalum is a Block D, Group 5, Period 6 element with an atomic weight of 180.94788. The number of electrons in each of tantalum's shells is [2, 8, 18, 32, 11, 2] and its electron configuration is [Xe] 4f14 5d3 6s2. The tantalum atom has a radius of 146 pm and a Van der Waals radius of 217 pm.
Tantalum was first discovered by Anders G. Ekeberg in 1802 in Uppsala, Sweden however, it was not until 1844 when Heinrich Rose first recognized it as a distinct element. In its elemental form, tantalum has a grayish blue appearance.
Tantalum is found in the minerals tantalite, microlite, wodginite, euxenite, and polycrase. Due to the close relation of tantalum to niobium in the periodic table, Tantalum's name originates from the Greek word Tantalos meaning Father of Niobe in Greek mythology.
Titanium:
Titanium is a Block D, Group 4, Period 4 element with an atomic weight of 47.867. The number of electrons in each of Titanium's shells is [2, 8, 10, 2] and its electron configuration is [Ar] 3d2 4s2. The titanium atom has a radius of 147 pm and a Van der Waals radius of 187 pm. Titanium was discovered by William Gregor in 1791 and first isolated by Jöns Jakob Berzelius in 1825. In its elemental form, titanium has a silvery grey-white metallic appearance.
Titanium's properties are chemically and physically similar to zirconium, both of which have the same number of valence electrons and are in the same group in the periodic table. Titanium has five naturally occurring isotopes: 46Ti through 50Ti, with 48Ti being the most abundant (73.8%).
Titanium is found in igneous rocks and the sediments derived from them. It is named after the word Titanos, which is Greek for Titans.
Related Information
Please email us for the customization.
Email: contact@nanochemazone.com
Please contact us for customization and price inquiry
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Tantalum Zirconium Oxide
Tantalum Zirconium Oxide
| Product |
Tantalum Zirconium Oxide |
| Colour | N/A |
| Purity | 99% |
| Particle Size | 1-5µM(Customizable) |
| Ingredient/MF | ZrO2/Ta2O5 |
| Product Code | NCZ-CP-398/20 |
| CAS Number | N/A |
| Density | N/A |
| Melting point | N/A |
| Boiling Point | N/A |
| Molecular Weight | N/A |
| Exact Mass | N/A |
Tantalum Zirconium Oxide Description:
Tantalum is a Block D, Group 5, Period 6 element with an atomic weight of 180.94788. The number of electrons in each of tantalum's shells is [2, 8, 18, 32, 11, 2] and its electron configuration is [Xe] 4f14 5d3 6s2. The tantalum atom has a radius of 146 pm and a Van der Waals radius of 217 pm.
Tantalum was first discovered by Anders G. Ekeberg in 1802 in Uppsala, Sweden however, it was not until 1844 when Heinrich Rose first recognized it as a distinct element. In its elemental form, tantalum has a grayish blue appearance. Tantalum is found in the minerals tantalite, microlite, wodginite, euxenite, and polycrase.
Due to the close relation of tantalum to niobium in the periodic table, Tantalum's name originates from the Greek word Tantalos meaning Father of Niobe in Greek mythology.
Zirconium is a Block D, Group 4, Period 5 element with an atomic weight of 91.224. The number of electrons in each of Zirconium's shells is 2, 8, 18, 10, 2 and its electron configuration is [Kr] 4d2 5s2. The zirconium atom has a radius of 160 pm and a Van der Waals radius of 186 pm. Zirconium was discovered by Martin Heinrich Klaproth in 1789 and first isolated by Jöns Jakob Berzelius in 1824. In its elemental form, zirconium has a silvery white appearance that is similar to titanium.
Zirconium's principal mineral is zircon (zirconium silicate). Zirconium is commercially produced as a byproduct of titanium and tin mining and has many applications as a opacifier and a refractory material. It is not found in nature as a free element.
The name of zirconium comes from the mineral zircon, the most important source of zirconium, and from the Persian wordzargun, meaning gold-like
Related Information
Please email us for the customization.
Email: contact@nanochemazone.com
Please contact us for customization and price inquiry
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Telluride copper Powder
Product Name: Telluride Copper Powder
| Product |
Telluride Copper Powder |
| CAS No. | 12023-23-7 |
| Appearance | Black Powder |
| Purity | 99.9% |
| APS | 1 – 5 Microns (Can be customized) |
| Ingredient | CuTe |
| Product Code | NCZ-NSC-139/20 |
Telluride Copper Powder Description:
Black crystal powder, room temperature is stable in the air. Copper telluride is not only an important inorganic material, or store a great form of tellurium and copper resources RELATED INFORMATION Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please email us for the customization. Email: contact@nanochemazone.com Note: We supply different size ranges of nano and micron size powder as per the client’s requirements and also accept customization in various parameters.
Tellurium Nanoparticles
Tellurium Nanoparticles
Product Name: Tellurium Nanoparticles (Te, Purity: >99%, APS: 80-100nm)
| Product | Tellurium Nanoparticles |
| Cat No | NCZ-MN-079/20 |
| CAS No | 13494-80-9 |
| Purity | >99% |
| APS | 80-100 nm (Can be Customized) |
| Molecular Formula | Te |
| Molecular Weight | 127.60 g/mol |
| Density | 6.24 g/cm³ |
| Melting Point | 449.51 °C |
| Boiling Point | 988 °C |
| Solubility | Insoluble in water |
Tellurium Nanowire
| Product | Tellurium Nanowire |
| Formula | Te |
| Stock No. | NCZNW118-19 |
| Melting Point | 722.66K |
| Boiling Point | 1261K |
| Density | 6.24 g/cm3 |
| Diameter | 20 nm (customization available) |
| Length | 5 µm (customization available) |
Tellurium Powder
Product Name: Tellurium Powder
| Product | Tellurium Powder |
| CAS No. | 13494-80-9 |
| Appearance | Powder |
| Purity | 99.9% |
| APS | 1 – 5 microns (can be customized) |
| Ingredient | Te |
| Product Code | NCZ-AE-181 |
Terbium (Tb) Micron Powder
Terbium (Tb) Micron Powder, Purity: 99.5 %, Size: 325 mesh
Terbium (Tb) Micron Powder
Purity: 99.5 %, Size: 325 mesh
Technical Properties:
| Product Number | NCZ-RE-112-19 |
| PURITY | 99.5 % |
| PARTICLE SIZE | 325 mesh |
| MELTING POINT | 1356 °C |
| BOILING POINT | 3123 °C |
| DENSITY | 8.229 gm/cc |
| FORM | Powder |
Note: We can manufacture and supply different particle sizes (Nano size range, Micron, Submicron, and different Mesh size) products of Alloy powders (Multi-Element, Multi-Element Oxide and Mixture of Rare Earth Elements) according to client’s requirements. Kindly ask for the customization in size and Element ratio composition.
Terbium Carbonate Hydrate Powder
Product Name: Terbium Carbonate Hydrate Powder
| Product | carbonate hydrate Powder |
| CAS No. | 100587-96-0 |
| Appearance | White Powder |
| Purity | 99.9% |
| APS | 1 – 5 Microns (Can be customized) |
| Ingredient | Tb2(CO3)3•xH2O |
| Product Code | NCZ-NSC-316/20 |
Terbium Carbonate Hydrate Powder Description:
Used as a catalyst and in pharmaceuticals.Terbium Carbonate Hydrate Powder Related Information:
Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please contact us for customization and price inquiry Email: contact@nanochemazone.com Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Terbium doped Gadolinium Oxysulfide Nano powder
Terbium doped Gadolinium Oxysulfide Nano powder
Product Name: Terbium doped Gadolinium Oxysulfide Nano powder (Gd2O2S:Tb, Purity: 99%, APS: 50-80nm)
| Product |
Terbium doped Gadolinium Oxysulfide Nano powder |
| Cat No | NCZ-NSC815/20 |
| CAS No | N/A |
| Purity | 99% |
| Molecular Formula | Gd2O2S:Tb |
| Form | Powder |
| Density | 7.5 g/cm³ |
| Solubility | Insoluble in water |
| APS | 50-80nm (Can be Customized) |
Related Information
Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please contact us for customization and price inquiry Email: contact@nanochemazone.com Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Terbium Fluoride
Terbium Fluoride
| Product |
Terbium Fluoride |
| CAS No. | 13708-63-9 |
| Appearance | White |
| Purity | 99% |
| APS | 1-5µM (Can be customized) |
| Ingredient | TbF3 |
| Product Code | NCZ-NSC567/20 |
| Molecular Weight | 215.92 g/mol |
| Density | 4.35 g/cm³ |
| Melting Point | 1,172ºC (2,141.6°F) |
Terbium Fluoride Description
Terbium Fluoride is a water-insoluble Terbium source for use in oxygen-sensitive applications, such as metal production. Fluoride compounds have diverse applications in current technologies and science, from oil refining and etching to synthetic organic chemistry and the manufacture of pharmaceuticals. Fluorides are also commonly used to alloy metals and for optical deposition. Terbium is primarily used in phosphors, particularly in fluorescent lamps, and as the high-intensity green emitter used in projection televisions.
Terbium Fluoride is generally immediately available in most volumes. Ultra-high purity and high purity compositions improve both optical quality and usefulness as scientific standards. Nanoscale elemental powders and suspensions, as alternative high surface area forms, may be considered.
Nanochemazone produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information is available as is a Reference Calculator for converting relevant units of measurement.
Related Information
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Terbium Fluoride Oxide
Terbium Fluoride Oxide
| Product |
Terbium Fluoride Oxide |
| Colour | White |
| Purity | 99% |
| Particle Size | 1-5µM (Customizable) |
| Ingredient/MF | FOTb |
| Product Code | NCZ-CP-391/20 |
| CAS Number | 21031-92-5 |
| Density | N/A |
| Melting point | 1172 °C |
| Boiling Point | N/A |
| Molecular Weight | 193.92 |
| Exact Mass | 193.918665 |
Terbium Fluoride Oxide Description
Fluorine is a Block P, Group 17, Period 2 element. Its electron configuration is [He]2s22p5. The fluorine atom has a covalent radius of 64 pm and its Van der Waals radius is 135 pm. In its elemental form, CAS 7782-41-4, fluorine gas has a pale yellow appearance. Fluorine was discovered by André-Marie Ampère in 1810. It was first isolated by Henri Moissan in 1886.
Terbium:
Terbium is a Block F, Group 3, Period 6 element with an atomic radius of 158.92535. The number of electrons in each of Terbium's shells is [2, 8, 18, 27, 8, 2] and its electron configuration is [Xe]4f9 6s2. The terbium atom has a radius of 177 pm and a Van der Waals radius of 221 pm.Terbium was discovered and first isolated by Carl Gustaf Mosander in 1842. In its elemental form, terbium is a silvery-white soft metal.
Terbium is found in cerite, gadolinite, and monazite. It is not found in nature as a free element. Terbium compounds are brightly fluorescent, and a majority of the world's terbium supply is used for creating green phosphors that enable trichromatic lighting technology. It is also frequently used as a dopant for crystalline solid-state devices and fuel cell materials. It is named after Ytterby, the town in Sweden where it was discovered.
Related Information
Please email us for the customization.
Email: contact@nanochemazone.com
Please contact us for customization and price inquiry
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Terbium Metal Organic Framework
| Product Name |
Terbium Metal Organic Framework |
| Stock No. | NCZMOF115 |
| CAS | 7440-27-9 |
| Purity | 99% |
| APS | 30-40µm |
| Molecular Formula | Tb(NO3)3·6H2O |
| Molecular Weight | 158.925 g/mol |
| Odour | Odorless |
| Color | Silvery-white |
| Density | 0.35 g/ cm3 |
| Pore Size | ~10Å |
| SSA | ~1300 m2/g (BET) |
| Solubility | Ethanol |
| Application | Gas adsorption: Carbon dioxide, nitrogen |
| Linker | H3BTB (1,3,5-tris(4-carboxyphenyl) benzene) |
Terbium Nitrate Powder
Terbium Nitrate Powder
Product |
Terbium Nitrate Powder |
| CAS No. | 57584-27-7 |
| Appearance | Powder |
| Purity | 99% |
| APS | 1-5 µM (Can be customized) |
| Ingredient | Tb(NO3)3 |
| Product Code | NCZ-AP-10053/20 |
| Molecular Weight | 452.94 |
| Density | N/A |
| Melting Point | N/A |
Terbium Nitrate Description
Terbium Nitrate have specialized uses in ceramics, glass, phosphors, lasers, and also is the important dopant for fibre amplifiers. Terbium Nitrate is a highly water soluble crystalline Terbium source for uses compatible with nitrates and lower (acidic) pH. Terbium ‘green’ phosphors (which fluoresce a brilliant lemon-yellow) are combined with divalent Europium blue phosphors and trivalent Europium red phosphors to provide the “trichromatic” lighting technology which is by far the largest consumer of the world’s Terbium supply. Trichromatic lighting provides much higher light output for a given amount of electrical energy than does incandescent lighting. It is also used in alloys and in the production of electronic devices.Related Information
Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please contact us for customization and price inquiry Email: contact@nanochemazone.com Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Terbium Oxide (Tb4O7) Micron Powder
Terbium Oxide (Tb4O7) Micron Powder, Purity: 99.99%, Size: 325 mesh
Terbium Oxide (Tb4O7) Micron Powder
Purity: 99.99 %, Size: 325 mesh
Technical Properties:
| Product Number | NCZ-RE-127-19 |
| PURITY | 99.99 % |
| COLOR | Dark Brown-Black |
| SIZE | 325 Mesh |
Note: We can manufacture and supply different particle sizes (Nano size range, Micron, Submicron, and different Mesh size) products of Alloy powders (Multi-Element, Multi-Element Oxide and Mixture of Rare Earth Elements) according to client’s requirements. Kindly ask for the customization in size and Element ratio composition.
Terbium Oxide (Tb4O7) Nanopowder/Nanoparticles
Terbium Oxide (Tb4O7) Nanopowder/Nanoparticles, Purity: 99.97%, Size: 80 nm, Cubic
Terbium Oxide (Tb4O7) Nanopowder/Nanoparticles
Purity: 99.97 %, Size: 80 nm, Cubic
Technical Properties:
| Product Number | NCZ-RE-127A-19 |
| PURITY | 99.97 % |
| AVERAGE PARTICLE SIZE | 80 nm |
| COLOR | Dark Brown-Black |
| MORPHOLOGY | Spherical |
| SPECIFIC SURFACE AREA (m2/g) | 15 |
| BULK DENSITY (g/cm3) | 0.8 |
| TRUE DENSITY (g/cm3) | 7,1 |
| ELEMENTAL ANALYSIS (%) | |
| NiO | 0.001 |
| Fe2O3 | 0.001 |
| CaO | 0.0045 |
| SiO2 | 0.0005 |
| Cl | 0.024 |
Note: We can manufacture and supply different particle sizes (Nano size range, Micron, Submicron, and different Mesh size) products of Alloy powders (Multi-Element, Multi-Element Oxide and Mixture of Rare Earth Elements) according to client’s requirements. Kindly ask for the customization in size and Element ratio composition.
Terbium Oxide Powder
Product Name: Terbium Oxide Powder
| Product | Terbium Oxide Powder |
| CAS No. | 12036-41-8 |
| Appearance | Powder |
| Purity | 99.9% |
| APS | 1 – 5 microns (can be customized) |
| Ingredient | Tb4O7 |
| Product Code | NCZ-AE-244 |
Terbium Vanadium Oxide
Terbium Vanadium Oxide
| Product |
Terbium Vanadium Oxide |
| Colour | White |
| Purity | 99% |
| Particle Size | 1-5µM (Customizable) |
| Ingredient/MF | O4TbV |
| Product Code | NCZ-CP-393/20 |
| CAS Number | 13566-09-1 |
| Density | N/A |
| Melting point | N/A |
| Boiling Point | N/A |
| Molecular Weight | 273.87 |
| Exact Mass | 273.848965 |
Terbium Vanadium Oxide Description:
Terbium is a Block F, Group 3, Period 6 element with an atomic radius of 158.92535. The number of electrons in each of Terbium's shells is [2, 8, 18, 27, 8, 2] and its electron configuration is [Xe]4f9 6s2. The terbium atom has a radius of 177 pm and a Van der Waals radius of 221 pm.
Terbium was discovered and first isolated by Carl Gustaf Mosander in 1842. In its elemental form, terbium is a silvery-white soft metal. Terbium is found in cerite, gadolinite, and monazite. It is not found in nature as a free element. Terbium compounds are brightly fluorescent, and a majority of the world's terbium supply is used for creating green phosphors that enable trichromatic lighting technology.
It is also frequently used as a dopant for crystalline solid-state devices and fuel cell materials. It is named after Ytterby, the town in Sweden where it was discovered.
Vanadium:
Vanadium is a Block D, Group 5, Period 4 element with an atomic weight of 50.9415. The number of electrons in each of Vanadium's shells is 2, 8, 11, 2 and its electron configuration is [Ar] 3d3 4s2. The vanadium atom has a radius of 134 pm and a Van der Waals radius of 179 pm. Vanadium was discovered by Andres Manuel del Rio in 1801 and first isolated by Nils Gabriel Sefström in 1830. In its elemental form, vanadium has a bluish-silver appearance.
It is a hard, ductile transition metal that is primarily used as a steel additive and in alloys such as Titanium-6AL-4V, which is composed of titanium, aluminum, and vanadium and is the most common titanium alloy commercially produced. Vanadium is found in fossil fuel deposits and 65 different minerals. Vanadium is not found free in nature; however, once isolated it forms an oxide layer that stabilizes the free metal against further oxidation. Vanadium was named after the word "Vanadis" meaning goddess of beauty in Scandinavian mythology.
Related Information
Please email us for the customization.
Email: contact@nanochemazone.com
Please contact us for customization and price inquiry
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Tetraethyl Silicate Powder
Product Name: Tetraethyl Silicate Powder
| Product | Tetraethyl Silicate |
| CAS No. | 78-10-4 |
| Form | Liquid |
| Purity | ≥ 99 % |
| APS | N.A. |
| Ingredient | SiC8H20O4 |
| Product Code | NCZ-MS-138 |
Thallium Ethoxide Powder
Thallium Ethoxide Powder
Product Name: Thallium Ethoxide Powder (Tl (OC2H5), Purity: >99.9%, APS: -10 Mesh)
| Product |
Thallium Ethoxide Powder |
| Cat No | NCZ-NSC885/20 |
| CAS No | 20398-06-5 |
| Purity | >99.9% |
| APS | -10 Mesh(Can be customized) |
| Molecular Formula | Tl(OC2H5) |
| Molecular Weight | 249.44 g/ mol |
| Density | 3.52 g/ cm³ |
| Melting Point | -3 °C |
| Boiling Point | 130 °C |
| Storage temp | 2-8 °C |
| Sensitivity | Moisture Sensitive |
| Solubility | Soluble In cold water |
Related Information
Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please contact us for customization and price inquiry Email: contact@nanochemazone.com Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Thallium Iodide Powder
Thallium Iodide Powder
Product Name: Thallium Iodide Powder (Tli, Purity: 99.9%, APS: -10 Mesh)
| Product |
Thallium Iodide Powder |
| Cat No | NZC-NSC886/20 |
| CAS No | 7790-30-9 |
| Purity | 99.9% |
| APS | -10 Mesh Can be customized |
| Molecular Formula | TlI |
| Molecular Weight | 331.29 g/ mol |
| Form | Powder |
| Color | Yellow |
| Density | 7.29 g/ cm³ |
| Melting Point | 440 °C |
| Boiling Point | 824 °C |
| Storage temp | 2-8°C |
| Sensitivity | Moisture Sensitive |
| Solubility | Insoluble In water |
Related Information
Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please contact us for customization and price inquiry Email: contact@nanochemazone.com Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Thorium Oxide Powder
Product Name: Thorium Oxide Powder
| Product | Thorium Oxide Powder |
| CAS No. | 1314-20-1 |
| Appearance | Powder |
| Purity | 99.9% |
| APS | 1 – 5 Microns (Can be customized) |
| Ingredient | ThO2 |
| Product Code | NCZ-AE-153 |
Thulium (Tm) Micron Powder
Thulium (Tm) Micron Powder, Purity: 99.5 %, Size: 325 mesh
Thulium (Tm) Micron Powder
Purity: 99.5 %, Size: 325 mesh
Technical Properties:
| Product Number | NCZ-RE-113-19 |
| PURITY | 99.5 % |
| PARTICLE SIZE | 325 mesh |
| MELTING POINT | 1545 °C |
| BOILING POINT | 1947 °C |
| DENSITY | 9.321 gm/cc |
| FORM | Powder |
| ELECTRIC RESISTIVITY | 79.0 micro ohm-cm @ 25 °C |
Note: We can manufacture and supply different particle sizes (Nano size range, Micron, Submicron, and different Mesh size) products of Alloy powders (Multi-Element, Multi-Element Oxide and Mixture of Rare Earth Elements) according to client’s requirements. Kindly ask for the customization in size and Element ratio composition.
Thulium Chloride Powder
Thulium Chloride Powder
| Product |
Thulium Chloride Powder |
| CAS No. | 19423-86-0 |
| Appearance | Powder |
| Purity | 99% |
| APS | 1-5 µM (Can be customized) |
| Ingredient | TmCl |
| Product Code | NCZ-AP-10033/20 |
| Molecular Weight | N/A |
| Density | N/A |
| Melting Point | N/A |
Description
Thulium Chloride has specialized uses in ceramics, glass, phosphors, lasers, and also is the important dopant for fibre amplifiers. Thulium Chloride is an excellent water soluble crystalline Thulium source for uses compatible with chlorides. Chloride compounds can conduct electricity when fused or dissolved in water. Chloride materials can be decomposed by electrolysis to chlorine gas and the metal.Related Information
Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please contact us for customization and price inquiry Email: contact@nanochemazone.com Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Thulium Fluoride
Thulium Fluoride
| Product | Thulium Fluoride |
| CAS No. | 13760-79-7 |
| Appearance | White |
| Purity | 99% |
| APS | 1-5 µM (Can be customized) |
| Ingredient | TmF3 |
| Product Code | NCZ-NSC568/20 |
| Molecular Weight | 225.93 g/mol |
| Density | N/A |
| Melting Point | 1,158ºC (2,116.4°F) |
Thulium Fluoride Description
Thulium Fluoride is a water insoluble Thulium source for use in oxygen-sensitive applications, such as metal production. Fluoride compounds have diverse applications in current technologies and science, from oil refining and etching to synthetic organic chemistry and the manufacture of pharmaceuticals. Magnesium Fluoride. Fluorides are also commonly used to alloy metals and for optical deposition.
Thulium emits blue upon excitation in flat panel screens and under X-ray bombardment emits both the 375 nm (ultra violet) and 465 (visible blue) wave lengths giving it useful applications in low radiation detection for detection badges and similar uses. Thulium Fluoride is generally immediately available in most volumes. High purity, submicron and nanopowder forms may be considered.
Nanochemazone produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information is available as is a Reference Calculator for converting relevant units of measurement.
Related Information
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Thulium Fluoride Powder
Thulium Fluoride Powder
| Product |
Thulium Fluoride |
| CAS No. | 13760-79-7 |
| Appearance | White |
| Purity | 99% |
| APS | 1-5 µM (Can be customized) |
| Ingredient | TmF3 |
| Product Code | NCZ-NSC547/20 |
| Molecular Weight | 225.93 g/mol |
| Density | 8.3 g/cm³ |
| Melting Point | 1,158ºC (2,116.4°F) |
Thulium Fluoride Description
Nanochemazone specializes in producing high purity Thulium Fluoride Sputtering Targets with the highest possible density High Purity Metallic Sputtering Targetand smallest possible average grain sizes for use in semiconductor, chemical vapor deposition (CVD) and physical vapor deposition (PVD) display and optical applications. Our standard Sputtering Targets for thin film are available monoblock or bonded with planar target dimensions and configurations up to 820 mm with hole drill locations and threading, beveling, grooves and backing designed to work with both older sputtering devices as well as the latest process equipment, such as large area coating for solar energy or fuel cells and flip-chip applications. We offer all shapes and configurations of targets compatible with all standard guns including circular, rectangular, annular, oval, "dog-bone," rotatable (rotary), multi-tiled and others in standard, custom, and research sized dimensions. All targets are analyzed using best demonstrated techniques including X-Ray Fluorescence (XRF), Glow Discharge Mass Spectrometry (GDMS), and Inductively Coupled Plasma (ICP). "Sputtering" allows for thin film deposition of an ultra high purity sputtering metallic or oxide material onto another solid substrate by the controlled removal and conversion of the target material into a directed gaseous/plasma phase through ionic bombardment. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. Nanochemazone specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. Nanochemazone also casts any of the rare earth metals and most other advanced materials into rod, bar, or plate form, as well as other machined shapes. We also produce Thulium Fluoride as rods, powder and plates. Other shapes are available by request.Thulium Fluoride Related Information
Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please contact us for customization and price inquiry Email: contact@nanochemazone.com Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Thulium Nitrate Hydrate Powder
Product Name: Thulium Nitrate Hydrate Powder
| Product | Thulium Nitrate Hydrate Powder |
| CAS No. | 100641-15-4 |
| Appearance | White Powder |
| Purity | 99.9% |
| APS | 1 – 5 Microns (Can be customized) |
| Ingredient | Tm(NO3)3•xH2O (x≈5) |
| Product Code | NCZ-NSC-328/20 |
Thulium Nitrate Hydrate Powder Description:
Used as a laboratory reagent, optical glasses, structural ceramics, catalysts, electrical components, and photo-optical material.Related Information:
Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please contact us for customization and price inquiry Email: contact@nanochemazone.com Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Thulium Oxide (Tm2O3) Micron Powder
Thulium Oxide (Tm2O3) Micron Powder, Purity: 99.99%, Size: 325 mesh
Thulium Oxide (Tm2O3) Micron Powder
Purity: 99.99 %, Size: 325 mesh
Technical Properties:
| Product Number | NCZ-RE-128-19 |
| PURITY | 99.99 % |
| COLOR | Pale Green |
| SIZE | 325 Mesh |
Note: We can manufacture and supply different particle sizes (Nano size range, Micron, Submicron, and different Mesh size) products of Alloy powders (Multi-Element, Multi-Element Oxide and Mixture of Rare Earth Elements) according to client’s requirements. Kindly ask for the customization in size and Element ratio composition.
Thulium Oxide Powder
Product Name: Thulium Oxide Powder
| Product | Thulium Oxide Powder |
| CAS No. | 12036-44-1 |
| Appearance | Powder |
| Purity | 99.9% |
| APS | 1 – 5 microns (can be customized) |
| Ingredient | Tm2O3 |
| Product Code | NCZ-AE-231 |
Ti2AlC Ceramic Material
Product Name: Ti2AlC Ceramic Material
Ti2AlC MAX Phase| Product | Ti2AlC Ceramic Material |
| Product Code | NCZ-MX-101 |
| Colour | Black powder |
| Purity（At.%） | 98% |
| Molecular Formula | Ti2AlC |
| CAS | 12537-81-4 |
Ti2AlC Ceramic Material APPLICATION FIELDS
MAXenes and MXenes-based nanocomposites have been widely used in nano-adsorption, biosensors, ion sieving, catalysis, lithium-ion batteries, supercapacitors, lubrication, and many other fields.RELATED INFORMATION
Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please email us for the customization. Email: contact@nanochemazone.com
Ti2AlC MAXene Powder
Product Name: Ti2AlC MAXene Powder
Ti2AlC MAX Phase Powder
| Product | Ti2AlC MAXene powder |
| Colour | Black Powder |
| Purity | ≥99 wt% |
| Ingredient | Ti2AlC |
| Product Code | NCZ-MX-120 |
| CAS | 12537-81-4 |
Ti2AlN MAXene Powder
Product Name: Ti2AlN MAXene Powder
| Product | Ti2AlN MAXene powder |
| Colour | Black Powder |
| Purity | ≥98 wt% |
| Ingredient | Ti2AlN |
| Product Code | NCZ-MX-121 |
| CAS | 60317-94-4 |
Titanium aluminum nitride Ti2AlN powder
APPLICATION FIELDS High-temperature coating, MXene precursor, conductive self-lubricating ceramic, lithium-ion battery, supercapacitor, electrochemical catalysis. Product name: Ti2AlN MAX Powder CAS#: 60317-94-4 Particle size: 200 mesh, 400 Mesh (Ask for customization) XRD: contact us to get it|
Related Products
|
|||
|
211 phase
|
312 phase
|
||
|
Ti2AlC
Ti2AlN
Ti2SnC(TiC&Ti5Sn3)
Cr2AlC
Nb2AlC(NbC)
Ti2AlC1-xNx
Ti2Al1-xSnxC
|
Ti3AlC2
Ti3SiC2
Ti3Al1-xSnxC2
Ti3Si1-xAlxC2
|
||
|
211:V2AlC,Mo2GaC,Zr2SnC,Nb2SnC
312:Ti3GeC2
413:Ti4AlN3,V4AlC3 |
|||
Ti2C MXene Powder
Product Name: Ti2C MXene Powder
Ti2C MXene| Product | Ti2C MXene powder |
| Colour | Black Powder |
| Purity | ≥98 wt% |
| Ingredient | Ti2C |
| Product Code | NCZ-MX-112 |
| CAS | 12316-56-2 |
APPLICATION FIELDS
High-temperature coating, MXene precursor, conductive self-lubricating ceramic, lithium-ion battery, supercapacitor, electrochemical catalysis. RELATED INFORMATION Storage Conditions: Airtight sealed, avoid light, and keep dry at room temperature. Please email us for the customization. Email: contact@nanochemazone.com
Ti2N Mxene Powder Nano & Micro Size range
Product Name: Ti2N-Mxene Powder
Product Code: NCZ-MX-218| Product | Ti2N MXene powder |
| Colour | Black Powder |
| Purity | ≥98 wt% |
| Ingredient | Ti2N |
| CAS NO | 12316-56-2 |
Ti2N MXene powder APPLICATION FIELDS
High-temperature coating, Mxene precursor, conductive self-lubricating ceramic, lithium-ion battery, supercapacitor, electrochemical catalysis.RELATED INFORMATION
Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please email us for the customization. Email: contact@nanochemazone.com
Ti2Se TMDS
Product Name: Ti2Se-TMDS Powder
Product Code: NCZ-MX-208| Product | Ti2Se TMDS powder |
| Colour | Blackish Gray |
| Purity | ≥98 wt% |
| Ingredient | Ti2Se |
| Form | Powder |
Ti2Se TMDS powder APPLICATION FIELDS
High-temperature coating, precursor, conductive self-lubricating ceramic, lithium-ion battery, supercapacitor, electrochemical catalysis. RELATED INFORMATION Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please email us for the customization. Email: contact@nanochemazone.com
Ti2Se-TMDS
Product Name: Ti2Se - TMDS
Ti2Se TMDS| Product | Ti2SE – TMDS |
| CAS No. | N.A. |
| Appearance | Powder |
| Purity | 99% |
| APS | 1 – 5 microns (can be customized) |
| Ingredient | Ti2Se |
| Product Code | NCZ-MX-311 |
Ti2SE – TMDS RELATED INFORMATION
Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please email us for the customization. Email: contact@nanochemazone.com
Ti2SiC MAX Powder
Product Name: Ti2SiC MAX Powder
Ti2SiC MAX Phase Powder
CAS: 12202-82-3| Product |
Ti2SiC MAXene powder |
| Colour | Black Powder |
| Purity | ≥98 wt% |
| Ingredient | Ti2SiC |
| Product Code | NCZ-MX-122/20 |
Ti2SiC MAX Powder
APPLICATION FIELDS
High-temperature coating, MXene precursor, conductive self-lubricating ceramic, lithium-ion battery, supercapacitor, electrochemical catalysis. RELATED INFORMATION Storage Conditions: Airtight sealed, avoid light, and keep dry at room temperature. Please email us for the customization. Email: contact@nanochemazone.com
Ti2SnC MAXene Powder
Product Name: Ti2SnC MAXene Powder
| Product | Ti2SnC MAXene Powder |
| CAS No. | 12316-56-2 |
| Appearance | Powder |
| Purity | 99% |
| APS | 1 – 5 microns (can be customized) |
| Ingredient | Ti2SnC |
| Product Code | NCZ-MX-318 |
Ti2SnC MAXene Powder INTRODUCTION
MAX phase ceramics (including titanium silicon carbide, Ti3AlC2 materials, etc.) are a new type of processing conductive ceramic materials that have attracted much attention. These ceramics contain more than sixty kinds of ternary carbides or nitrides. M represents the transitional front metal elements. ; A represents the main group element, mainly the elements of the third main group and the fourth main group; X represents a carbon or nitrogen element. Among them, Ti3SiC2 is the most widely studied. Ti3SiC2 was successfully synthesized by the hot pressing method in 1996 by Professor Barsoum M of Drexel University in the United States, and its excellent performance was found. Due to the unique nano-layered crystal structure, these ceramic materials have antioxidant, self-lubricating properties, high room temperature fracture toughness, and electrical conductivity. Such materials can be widely used as high-temperature structural materials, electrode brush materials, chemical anticorrosive materials, and high-temperature heating elements. The products are mainly used for high-temperature coating, MXene precursor, conductive self-lubricating ceramic, lithium-ion battery, supercapacitor, electrochemical catalysis.RELATED INFORMATION
Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please email us for the customization. Email: contact@nanochemazone.com
Ti3AlC2 MAX Phase Powder
Product Name: Ti3AlC2 MAXene
Ti3AlC2 MAX Phase Powder Titanium Aluminium Carbide MAX Phase Powder at a low Price. Product Code: NCZ-MX-105| Product | Ti3AlC2 MAXene powder |
| Colour | Black Powder |
| Purity | ≥98 wt% |
| Ingredient | Ti3AlC2 |
| CAS NO | 196506-01-1 |
Ti3AlC2 MAX POWDER APPLICATION FIELDS
High-temperature coating, Mxene precursor, conductive self-lubricating ceramic, lithium-ion battery, supercapacitor, electrochemical catalysis.RELATED INFORMATION
Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please email us for the customization. Email: contact@nanochemazone.com
Ti3AlC2 max phase target
Product Name: Ti3AlC2 Max Phase Target
| Product | Ti3AlC2 freestanding thin films/Target Max Phase |
| Colour | Blackish |
| Thickness | 5-10 µm |
| Diameter | ≈45 mm (Ask for customization) |
| Product Code | NCZ-MX-222 |
| CAS | 196506-01-1 |
Ti3AlC2 Max Phase Target APPLICATION FIELDS
Flexible electronic devices (sensors, capacitors), flexible batteries, etc. It also can be used to deposit other materials as composite materials and separation membranes for seawater separation.
RELATED INFORMATION
Storage Conditions: Sealed, avoid light, Argon protection, and keep dry at room temperature. Expiry date: Three months.
Ti3AlC2 MAXene Powder
Product Name: Ti3AlC2 MAXene Powder
Ti3AlC2 MAXene Powder and Ti3AlC2 MAX Phase powder
| Product | Ti3AlC2 MAX Phase |
| Colour | Black Powder |
| Purity | ≥99 wt% |
| Ingredient | Ti3AlC2 |
| Product Code | NCZ-MX-123 |
| CAS | 196506-01-1 |
MAX Phase APPLICATION FIELDS
High-temperature coating, MXene precursor, conductive self-lubricating ceramic, lithium-ion battery, supercapacitor, electrochemical catalysis.Ti3AlC2 MAXene Powder RELATED INFORMATION
Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please email us for the customization. Email: contact@nanochemazone.comAbout MXenes:
MXenes are a family of two-dimensional (2D) inorganic compounds with the general formula of Mn+1XnTx, where M is an early transition metal, X is carbon and/or nitrogen, and T is a functional group on the surface of an MXene (typically O, OH and F) (M. Naguib, et al. Adv.
Mater., 2014, 26, 992). MXenes have the high metallic conductivity of transition metal carbides and are (unlike other 2D materials like graphene) hydrophilic because of their hydroxyl- and oxygen-terminated surfaces.
MXenes were first discovered in 2011 at Drexel University, as a result of selectively etching the A layer out of bulk ternary transition metal carbides and nitrides, known as MAX phases, which yields multilayered MXenes.
To increase surface area and accessibility of its surface, multilayered MXenes typically undergo further processing to yield solutions of delaminated MXenes.
Due to their hydrophilicity, MXenes can be processed in aqueous and polar organic solvents to form stable colloidal solutions that can be filtered to form freestanding films and spray-coated to form transparent conductive coatings.
This provides a greater potential application for this family of materials. The first MXene discovered was Ti3C2 and it was initially investigated for its electrochemical properties in batteries and supercapacitors (B. Anasori, et al.
Nature Reviews Materials, 2017, 2, 16098). In the past several years, however, over two dozen MXenes have been discovered along with dozens of other applications.
Ti3AlC2/Cr2AlC Target material
Product Name: Ti3AlC2/Cr2AlC Max Phase Target
| Product | Ti3AlC2/Cr2AlC freestanding thin films/Target Max Phase |
| Colour | Blackish |
| Thickness | 5-10 µm |
| Diameter | ≈45 mm (Ask for customization) |
| Product Code | NCZ-MX-223 |
Ti3AlC2/Cr2AlC Target material APPLICATION FIELDS
Flexible electronic devices (sensors, capacitors), flexible batteries, etc. It also can be used to deposit other materials as composite materials and separation membranes for seawater separation.
RELATED INFORMATION Storage Conditions: Sealed, avoid light, Argon protection, and keep dry at room temperature. Expiry date: Three months.
Ti3AlN Max Material
Product Name: Ti3AlN Max Material
| Product | Ti3AlN Max Material |
| CAS No. | 60317- |
| Appearance | Powder |
| Purity | 99% |
| APS | 1 – 5 microns (can be customized) |
| Ingredient | Ti3AlN |
| Product Code | NCZ-MX-317 |
Ti3AlN Max Material INTRODUCTION
MAX phase ceramics (including titanium silicon carbide, Ti3AlC2 materials, etc.) are a new type of processing conductive ceramic materials that have attracted much attention. These ceramics contain more than sixty kinds of ternary carbides or nitrides. M represents the transitional front metal elements. ; A represents the main group element, mainly the elements of the third main group and the fourth main group; X represents a carbon or nitrogen element. Among them, Ti3SiC2 is the most widely studied. Ti3SiC2 was successfully synthesized by the hot pressing method in 1996 by Professor Barsoum M of Drexel University in the United States, and its excellent performance was found. Due to the unique nano-layered crystal structure, these ceramic materials have antioxidant, self-lubricating properties, high room temperature fracture toughness, and electrical conductivity. Such materials can be widely used as high-temperature structural materials, electrode brush materials, chemical anticorrosive materials, and high-temperature heating elements. The products are mainly used for high-temperature coating, MXene precursor, conductive self-lubricating ceramic, lithium-ion battery, supercapacitor, electrochemical catalysis. RELATED INFORMATION Storage Conditions: Airtight sealed, avoid light, and keep dry at room temperature. Please email us for the customization. Email: contact@nanochemazone.com
Ti3AlN MAXene powder
Product Name: Ti3AlN MAXene powder
Product Code: NCZ-MX-204| Product | Ti3AlN MAXene |
| Colour | Black Powder |
| Purity | ≥98 wt% |
| Ingredient | Ti3AlN - MAX |
| CAS NO | 12316-56-2 |
Ti3AlN MAXene powder APPLICATION FIELDS
High-temperature coating, Mxene precursor, conductive self-lubricating ceramic, lithium-ion battery, supercapacitor, electrochemical catalysis. RELATED INFORMATION Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please email us for the customization. Email: contact@nanochemazone.com
Ti3C2 Aqueous Solution Single Layer Small Size
Product Name: Single Layer Small Size - Ti3C2 Aqueous Solution
Ti3C2 Mxene
Ti3C2 Mxene Aqueous Solution
| Product | Full Hydroxyl MXene – Ti3C2 |
| CAS No. | 12316-56-2 |
| Appearance | Solution/Powder |
| Purity | 99% |
| APS | 1 – 5 microns (can be customized) |
| Ingredient | Ti3C2 |
| Product Code | NCZ-MX-314 |
Single Layer Small Size - Ti3C2 Aqueous Solution
RELATED INFORMATION
Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please email us for the customization. Email: contact@nanochemazone.com
Ti3C2 MXene Powder
Ti3C2Tx (MXene) Powder
Ti3C2Tx MXene (multilayer)
multilayer Ti3C2Tx MXene
multilayer MXene Ti3C2Tx nanoflakes| Product | Ti3C2Tx (MXene) Powder |
| Product Code | NCZ-MX-110-20 |
| Thickness | 100-200 nm (Customizable) |
| Purity | ~99 wt% |
| Ingredient | Ti3C2 |
| CAS NO | 12363-89-2 |
| Appearance: | Black Powder |
| Particle Size | 10 micron to 200 microns (Customizable) |
Ti3C2 Mxene
MAX phases are layered and have the general formula: Mn+1AXn, (MAX) where n = 1 to 3, M is an early transition metal, A is a non-metal element and X is either carbon and/or nitrogen. Whereas, MXenes are a class of layered materials made from the precursor MAXene by removing the A element. Thus, they are named MXenes. While the precursor has Mn+1AXn chemical formula MXene has M(n+1)Xn formula.
Ti3C2 MXene Powder APPLICATION FIELDS MXenes and MXenes-based nanocomposites have been widely used in nano-adsorption, biosensors, ion sieving, catalysis, lithium-ion batteries, supercapacitors, lubrication, and many other fields. Ti3C2 MXene Powder RELATED INFORMATION Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please email us for the customization. Email: contact@nanochemazone.com
Ti3C2 MXene Powder Multiplayer
Product Name: Ti3C2Tx (MXene) Multilayer Powder
Ti3C2Tx MXene
Ti3C2 Mxene multilayer
| Product | Ti3C2Tx (MXene) Multilayer |
| MF | Product Code: NCZMX-109-20 |
| Colour | Black Powder |
| Purity | 99 wt % |
| Number of layers | 10-50 (customizable) |
| Ingredient | Ti3C2 |
| CAS NO | 12363-89-2 |
Ti3C2 MXene Quantum Dots
Product Name: Ti3C2 MXene Quantum Dots
| Product |
Ti3C2 MXene Quantum Dots |
| CAS No. | 12363-89-2 |
| Appearance | Suspension |
| Purity | 99% |
| Diameter | 5 – 10 nm (can be customized) |
| Ingredient | Ti3C2 |
| Product Code | NCZ-MX-309 |
Ti3C2 Transparent Film
Product Name: Ti3C2 Transparent Film
| Product | Ti3C2 Transparent Film |
| CAS No. | 12363-89-2 |
| Appearance | Fim |
| Purity | 99% |
| Size | 1 * 1 cm (can be customized) |
| Ingredient | Ti3C2 |
| Product Code | NCZ-MX-313 |
Ti3C2Tx (MXene) Nanosize thin layer dispersion
Product Name: Small diameter Ti3C2Tx (MXene) thin layer dispersion
Ti3C2Tx MXene
| Product | Ti3C2Tx MXene thin layer dispersion |
| Product Code | NCZ-MX-104-D |
| Colour | Black Solution |
| Lateral Size | 50-150 nm |
| Concentrations | 2 mg/mL |
| Number of Layers | 1 to 5 |
| CAS | 12363-89-2 |
Ti3C2Tx MXene Few Layer Dispersion Solution
Product Name: Ti3C2Tx MXene Few-Layer Dispersion Solution
Ti3C2Tx MXene Few-Layer Dispersion
Product Code: NCZ-MX-107
| Product | Ti3C2Tx (MXene) Few-Layer Dispersion Solution |
| Colour | Black Solution |
| Lateral size | 2-5 μm (customizable) |
| Number of layers | 1-10 (customizable) |
| Concentration | 5mg/ml (customizable) |
| CAS NO | 12363-89-2 |
Ti3C2Tx MXene Few layer Nanoflake
Product Name: Ti3C2Tx (MXene) Few layers Nanoflake Powder
Ti3C2Tx MXene (few-layer nanoflakes)
Few-layered Ti3C2Tx MXene
Few-layer MXene Ti3C2Tx nanoflakes
Ti3C2Tx MXene| Product |
Ti3C2Tx (MXene) Few layer Nanoflake |
| MF | Product Code: NCZ-MX-109 |
| Colour | Black Powder |
| Purity | 99 wt % |
| Number of layers | 1-10 (customizable) |
| Ingredient | Ti3C2 |
| CAS NO | 12363-89-2 |
Ti3C2Tx MXene Few layer Nanoflake APPLICATION FIELDS
MXenes and MXenes-based nanocomposites have been widely used in nano-adsorption, biosensors, ion sieving, catalysis, lithium-ion batteries, supercapacitors, lubrication, and many other fields. Ti3C2Tx MXene Few layer Nanoflake RELATED INFORMATION Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please email us for the customization. Email: contact@nanochemazone.com
Ti3C2Tx MXene multilayer Nanoflake
Product Name: Ti3C2Tx (MXene) multilayer Nanoflake
Ti3C2Tx MXene (multilayer nanoflakes)
multilayer Ti3C2Tx MXene
multilayer MXene Ti3C2Tx nanoflakes| Product |
Ti3C2Tx (MXene) multilayer Nanoflake |
| Product Code | NCZ-MX-110 |
| Thickness | 100-200 nm (customizable) |
| Purity | ~99 wt% |
| Ingredient | Ti3C2 |
| CAS NO | 12316-56-2 |
| Appearance: | Black Powder |
Ti3C2Tx MXene multilayer Nanoflake APPLICATION FIELDS
MXenes and MXenes-based nanocomposites have been widely used in nano-adsorption, biosensors, ion sieving, catalysis, lithium-ion batteries, supercapacitors, lubrication, and many other fields. Ti3C2Tx MXene multilayer Nanoflake RELATED INFORMATION Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please email us for the customization. Email: contact@nanochemazone.com
Ti3C2Tx MXene Thin Layer Dispersion Solution
Product Name: Ti3C2Tx MXene Thin Layer Dispersion Solution
Product Code: NCZ-MX-106| Product |
Ti3C2Tx (MXene) Thin Layer Dispersion Solution |
| Colour | Black Solution |
| Lateral size | 2-5 μm |
| Number of layers | 1-5 |
| Concentration | 2 mg/ml |
| CAS NO | 12363-89-2 |
Ti3C2Tx MXene Thin Layer Dispersion Solution APPLICATION FIELDS
MXenes and MXenes-based nanocomposites have been widely used in nano-adsorption, biosensors, ion sieving, catalysis, lithium-ion batteries, supercapacitors, lubrication, and many other fields. RELATED INFORMATION Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please email us for the customization. Email: contact@nanochemazone.com
Ti3C2Tx MXene Thin Layer Dispersion Solution
Product Name: Ti3C2Tx MXene Thin Layer Dispersion Solution
Product Code: NCZ-MX-108| Product |
Ti3C2Tx MXene Thin Layer Dispersion Solution |
| Colour | Black Solution |
| Lateral size | 2-5 μm |
| Number of layers | 1-10 |
| Concentration | 2.5 mg/ml |
| CAS NO | 12363-89-2 |
Ti3CN MXenes Material
Product Name: Ti3CN MXenes Material
| Product | Ti3CN MXenes Material |
| CAS No. | 12316-56-2 |
| Appearance | Powder |
| Purity | 99% |
| APS | 1 – 5 microns (can be customized) |
| Ingredient | The organ-like material is etched by hydrofluoric acid . Organ-like material obtained by etching with HF . |
| Product Code | NCZ-MX-302 |
Ti3GeC2 MAXene Powder
Product Name: Ti3GeC2 MAXene Powder
Product Code: NCZ-MX-206| Product | Ti3GeC2 MAX |
| Colour | Black Powder |
| Purity | ≥98 wt% |
| Ingredient | Ti3GeC2 |
| CAS NO | 12316-56-2 |
Ti3SiC2 max phase target
Product Name: Ti3SiC2 Max Phase Target
| Product | Ti3SiC2 freestanding thin films/Target Max Phase |
| Colour | Blackish |
| Thickness | 5-10 µm |
| Diameter | ≈45 mm (Ask for customization) |
| Product Code | NCZ-MX-221 |
Flexible electronic devices (sensors, capacitors), flexible batteries, etc. It also can be used to deposit other materials as composite materials and separation membranes for seawater separation.
RELATED INFORMATION Storage Conditions: Sealed, avoid light, Argon protection and keep dry at room temperature. Expiry date: Three months.
Ti3SiC2 Max Phase Target
Product Name: Ti3SiC2 Max Phase Target
| Product | Ti3SiC2 Max Phase Target |
| CAS No. | 12316-56-2 |
| Appearance | Powder |
| Purity | 99% |
| Size | 80 * 5 mm |
| Ingredient | Ti3SiC2 |
| Product Code | NCZ-MX-316 |
Ti3SiC2 MAXene Powder
Product Name: Ti3SiC2 MAXene Powder
Ti3SiC2 MAX Phase Powder
CAS: 12202-82-3| Product |
Ti3SiC2 MAXene powder |
| Colour | Black Powder |
| Purity | ≥98 wt% |
| Ingredient | Ti3SiC2 |
| Product Code | NCZ-MX-122 |
Ti4AlN3 MAXene Powder
Product Name: Ti4AlN3 MAXene Powder
Product Code: NCZ-MX-207| Product | Ti4AlN3 MAX |
| Colour | Black Powder |
| Purity | ≥98 wt% |
| Ingredient | Ti4AlN3 |
| CAS NO | 12316-56-2 |
Tin Copper Alloy Powder / Nanopowder
| MF: | Sn:Cu |
| Chemical Name: |
Tin Copper Alloy Nanopowder |
| Purity: | > 99.99% |
| APS: | <80 nm (Size Customization possible) |
| Form: | Nanopowder |
| Product Number: | NCZA134 |
| CAS Number: | 7440-31-5 / 7440-50-8 |
Tin Lead Alloy Nanoparticles
| MF: | Sn:Pb |
| Chemical Name: |
Tin Lead Alloy Nanoparticles |
| Purity: | > 99.99% |
| APS: | <80 nm (Size Customization possible) |
| Form: | Nanopowder |
| Product Number: | NCZA135 |
| CAS Number: | 7440-31-5 / 7439-92-1 |
Tin Metal Organic Framework
| Product Name |
Tin Metal Organic Framework |
| Stock No. | NCZMOF109 |
| CAS | 7440-31-5 |
| Purity | 99% |
| APS | 30-40µm |
| Molecular Formula | N/A |
| Molecular Weight | 150.71 g/mol |
| Odour | Odorless |
| Color | Blue-black |
| Density | 6.95 g/cm³ |
| Pore Size | ~12.68 Å |
| SSA | 40-80m2/g (BET) |
| Crystallographic Structure | Tetrahedron |
| Solubility | Methanol |
| Application | Gas storage and Sensor application |
Tin nanoparticles powder
Tin nanoparticles
Tin Nanopowder
Nano Tin Powder
Sn Nanopowder
| MF: | Sn |
| Chemical Name: | Tin |
| Purity: | > 99.99% |
| APS: | 50 nm (Size Customization possible) |
| Form: | Nanopowder |
| Product Number: | #NCZ5301 |
| CAS Number | 7440-31-5 |
Tin Oxide nanoparticles powder
Tin Oxide Nanoparticles
Tin Oxide Nanopowder
Nano Tin Oxide powder
| MF: | SnO2 |
| Chemical Name: | Tin Oxide |
| Purity: | > 99.99% |
| APS: | 50 nm (Size Customization possible) |
| Form: | Nanopowder |
| Product Number: | #NCZ5401 |
| CAS Number | 18282-10-5 |
Tin Oxide Nanopowder
Tin Oxide Nanopowder
Product Name: Tin Oxide Nanopowder (SnO2, Fluorine Doped, 99.9%, 80-100nm)
| Product |
Tin Oxide Nanopowder |
| Cat No | NCZ-NSC816/20 |
| CAS No | 18282-10-5 |
| Purity | 99.9% |
| APS | 80-100nm ( Can be customized) |
| Molecular Formula | SnO2 |
| Molecular Weight | 150.71g/mol |
| Doping | Fluorine Doped |
| Doping %age | 2-3Wt% |
| Form | Powder |
| Color | White |
| Density | 6.95 g/cm³ |
| Melting Point | 1630 °C |
| Boiling Point | 1800-1900 °C |
| Solubility | Insoluble in water |
Tin Oxide Nanopowder Related Information
Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please contact us for customization and price inquiry Email: contact@nanochemazone.com Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Tin Powder
Tin Powder
Tin Metal Powder
Tin Nanoparticles
Tin Microparticles
| MF: | Sn |
| Chemical Name: | Tin Powder |
| Purity: | >99.99% |
| APS: | 40-50 µm (Size Customization possible) |
| Form: | Micro powder |
| Product Number: | NCZM125 |
| CAS Number | 7440-31-5 |
Tin Selenide Powder
Tin Selenide Powder
Product Name: Tin Selenide Powder (SnSe, Purity: 99.9%, APS: < 100 µm)
| Product |
Tin (II) Selenide Powder |
| Cat No | NCZ-NSC887/20 |
| CAS No | 1315-06-6 |
| Purity | 99.9% |
| APS | < 100µm ( Can be customized) |
| Molecular Formula | SnSe |
| Molecular Weight | 197.67 g/mol |
| Form | Powder |
| Color | White - off-white |
| Appearance | Steel Gray |
| Density | 6.179 g/cm³ |
| Melting Point | 861 °C |
| Flash Point | 378 °C |
| Odor | Odorless Powder |
| Crystallographic Structure | Monoclinic |
| Crystal Structure | Orthorhombic |
| Solubility in Water | Insoluble |
Related Information
Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please contact us for customization and price inquiry Email: contact@nanochemazone.com Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Tin Selenide Powder
Tin Selenide Powder
| Product |
Tin Selenide |
| CAS No. | 1315-06-6 |
| Appearance | Gary |
| Purity | 99% |
| APS | 1-5µM (Can be customized) |
| Ingredient | SnSe |
| Product Code | NCZ-NSC522/20 |
| Molecular Weight | 197.67 g/mol |
| Density | 6.18 g/cm³ |
| Melting Point | 861ºC (1,581.8°F) |
Tin Selenide Description :
Tin Selenide is a crystalline solid used as a semiconductor and in photo optic applications. Nanochemazone produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information is available as is a Reference Calculator for converting relevant units of measurement.
Tin Selenide Related Information
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Tin Selenide Powder
Tin Selenide Powder
| Product |
Tin Selenide |
| CAS No. | 1315-06-6 |
| Appearance | Gray |
| Purity | 99% |
| APS | 1-5µM (Can be customized) |
| Ingredient | SnSe |
| Product Code | NCZ-NSC675/20 |
| Molecular Weight | 197.67 g/mol |
| Density | 6.18 g/cm³ |
| Melting Point | 861ºC (1,581.8°F) |
Tin Selenide Description
Tin Selenide is a crystalline solid used as a semiconductor and in photo optic applications. Nanochemazone produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information is available as is a Reference Calculator for converting relevant units of measurement.
Related Information
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Tin Sulfide Powder
Tin Sulfide Powder micro and Nano Particle Size range
| Product | Tin Sulfide Powder |
| Formula | SnS |
| Stock No. | NCZM106-19 |
| Purity | ≥99.5% |
| APS | 5- 10 µm (Micro & Nano size range customization available) |
| Form | Brown-black orthorhombic crystal |
| Sn | ~78.8 wt% |
| Melting point | 880 deg C |
| Boiling point | 1230 deg C |
| Density: | 5.22 g/cm3 |
Tin Sulfide Powder
Product Name: Tin Sulfide Powder
| Product | Tin Sulfide Powder |
| CAS No. | 1314-95-0 |
| Appearance | Powder |
| Purity | 99.9% |
| APS | 1 – 5 microns (can be customized) |
| Ingredient | SnS2 |
| Product Code | NCZ-AE-224 |
Tin Telluride Powder
Product Name: Tin Telluride Powder
| Product | Tin Telluride Powder |
| CAS No. | 12040-02-7 |
| Appearance | Grey Powder |
| Purity | 99.9% |
| APS | 1 – 5 Microns (Can be customized) |
| Ingredient | SnTe |
| Product Code | NCZ-NSC-141/20 |
Tin Telluride Powder Description:
Steady at room temperature and pressure. Avoid light, open flame, high temperature. Do not dissolve in water, with semiconductor properties RELATED INFORMATION Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please email us for the customization. Email: contact@nanochemazone.com Note: We supply different size ranges of nano and micron size powder as per the client’s requirements and also accept customization in various parameters.
Titanate-Lithium Titanium Oxide Nanopowder
Titanate-Lithium Titanium Oxide Nanopowder
| Product | Titanate-Lithium Titanium Oxide Nanopowder |
| Colour | White |
| Purity | ≥ 99.99% |
| Particle size | 1-10 µM(customizable) |
| Ingredient/MF | Li4Ti5O12 |
| Product Code | NCZ-CK-189/20 |
| CAS Number | 12031-82-2/ 12031-95-7 |
Titanium Alloy Spherical
Titanium Alloy Spherical
| Product |
Titanium Alloy Spherical |
| Colour | N/A |
| Purity | 99% |
| Particle size | 1-5μm (Customizable) |
| Ingredient/MF | Ti-5Al-2.5Sn |
| Product Code | NCZ-CP-290/20 |
| CAS No | N/A |
Titanium Alloy Spherical Description
Titanium alloys are alloys that contain a mixture of titanium and other chemical elements. Such alloys have very high tensile strength and toughness (even at extreme temperatures). They are light in weight, have extraordinary corrosion resistance and the ability to withstand extreme temperatures.
However, the high cost of both raw materials and processing limit their use to military applications, aircraft, spacecraft, bicycles, medical devices, jewelry, highly stressed components such as connecting rods on expensive sports cars and some premium sports equipment and consumer electronics.
Although "commercially pure" titanium has acceptable mechanical properties and has been used for orthopedic and dental implants, for most applications titanium is alloyed with small amounts of aluminium and vanadium, typically 6% and 4% respectively, by weight. This mixture has a solid solubility which varies dramatically with temperature,
Allowing it to undergo precipitation strengthening. This heat treatment process is carried out after the alloy has been worked into its final shape but before it is put to use, allowing much easier fabrication of a high-strength product.
Related information
Please email us for the customization.
Email: contact@nanochemazone.com
Please contact us for customization and price inquiry
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Titanium Aluminide Powder
Product Name: Titanium Aluminide Powder
| Product | Titanium aluminide Powder |
| CAS No. | 39410-63-4 |
| Appearance | White Powder |
| Purity | 99.9% |
| APS | 1 – 5 Microns (Can be customized) |
| Ingredient | Ti3Al |
| Product Code | NCZ-NSC-284/20 |
Titanium Aluminide Powder Description:
Titanium aluminide is used in aircraft turbine engines, exhaust valves, and turbochargers for passenger vehicle engines, the intermediate processes for some mill products.Related Information:
Storage Conditions: Airtight sealed, avoid light, and keep dry at room temperature. Please contact us for customization and price inquiry Email: contact@nanochemazone.com Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Titanium Aluminium Vanadium Alloy Powder
Titanium Aluminium Vanadium Alloy Powder
| MF: | TiAlV |
| Chemical Name: | Titanium Aluminium Vanadium Alloy Powder |
| Purity: | > 99.99% |
| APS: | 15 µm (Size Customization possible) |
| Form: | Powder |
| Product Number: | NCZA136 |
| CAS Number: | 7429-32-6 / 7429-90-5 / 7440-62-2 |
Titanium Aluminium Vanadium Ti-6Al-4V powder spherical
| Product | Titanium Alloy Ti-6Al-4V (Grade 5), Annealed |
| MF | Ti-6Al-4V |
| Item Code | NCZ-AM-103-19 |
| CAS Number | 12743-70-3 |
| Particle Size | 45-75 Micron (Customization is available) |
| Composition: | Ti/6Al/4V |
| Purity | 98% to 99.99% |
Titanium Aluminum Alloy Powder
Titanium Aluminum Alloy Powder
Product Name: Titanium Aluminum Alloy Powder
| Product | Titanium Aluminum Alloy Powder |
| Colour | White |
| Purity | ≥ 99.9% |
| Particle size | 1-10 µM (customizable) |
| Ingredient/MF | Ti-Al |
| Product Code | NCZ-CS-142/20 |
| CAS Number | 7440-32-6 / 7429-90-5 |
Titanium Aluminum Alloy Powder Description:
Titanium aluminide, TiAl, is an intermetallic chemical compound. It is lightweight and resistant to oxidation and heat. However, it suffers from low ductility. The development of TiAl based alloys began about 1970; however, the alloys have only been used in these applications since about 2000. Titanium aluminide has three major intermetallic compounds: gamma TiAl, alpha 2-Ti3Al, and TiAl3. Among the three, gamma TiAl has received the most interest and applications. Gamma TiAl has excellent mechanical properties and oxidation and corrosion resistance at elevated temperatures (over 600 degrees Celsius).Titanium Aluminum Alloy Powder Application:
- It finds use in several applications including automobiles and aircraft
- TiAl based alloys have a strong potential to increase the thrust-to-weight ratio in the aircraft engine.
Titanium Aluminum Alloy Spherical
Titanium Aluminum Alloy Spherical
| Product |
Titanium Aluminum Alloy Spherical |
| Colour | N/A |
| Purity | 99% |
| Particle size | 1-5μm (Customizable) |
| Ingredient/MF | Ti47Al2Cr2Nb |
| Product Code | NCZ-CP-297/20 |
| CAS No | N/A |
Titanium Aluminum Alloy Spherical Description
Aluminium alloys (or aluminum alloys; see spelling differences) are alloys in which aluminium (Al) is the predominant metal. The typical alloying elements are copper, magnesium, manganese, silicon, tin and zinc. There are two principal classifications, namely casting alloys and wrought alloys, both of which are further subdivided into the categories heat-treatable and non-heat-treatable. About 85% of aluminium is used for wrought products, for example rolled plate, foils and extrusions.
Cast aluminium alloys yield cost-effective products due to the low melting point, although they generally have lower tensile strengths than wrought alloys. The most important cast aluminium alloy system is Al–Si, where the high levels of silicon (4.0–13%) contribute to give good casting characteristics. Aluminium alloys are widely used in engineering structures and components where light weight or corrosion resistance is required.
Alloys composed mostly of aluminium have been very important in aerospace manufacturing since the introduction of metal-skinned aircraft. Aluminium-magnesium alloys are both lighter than other aluminium alloys and much less flammable than other alloys that contain a very high percentage of magnesium. Aluminium alloy surfaces will develop a white, protective layer of aluminium oxide if left unprotected by anodizing and/or correct painting procedures.
In a wet environment, galvanic corrosion can occur when an aluminium alloy is placed in electrical contact with other metals with more positive corrosion potentials than aluminium, and an electrolyte is present that allows ion exchange. Referred to as dissimilar-metal corrosion, this process can occur as exfoliation or as intergranular corrosion.
Aluminium alloys can be improperly heat treated. This causes internal element separation, and the metal then corrodes from the inside out. Aluminium alloy compositions are registered with The Aluminum Association. Many organizations publish more specific standards for the manufacture of aluminium alloy,
Related Information
Please email us for the customization.
Email: contact@nanochemazone.com
Please contact us for customization and price inquiry
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Titanium Aluminum Carbide Maxene Powder
Titanium Aluminum Carbide Maxene Powder
Product Name: Titanium Aluminum Carbide Maxene Powder| Product | Titanium Aluminum Carbide Maxene Powder |
| CAS No. | 196506-01-1 |
| Appearance | Powder |
| Purity | 99.9% |
| APS | 1 – 5 Microns (Can be customized) |
| Ingredient | Ti3AlC2 |
| Product Code | NCZ-AE-167 |
Description of Titanium Aluminum Carbide Maxene Powder:
There is a large family of ternary carbides (ternary is an adjective meaning 'composed of three') with the general formula Mn+1AXn, where n = 1–3, M denotes a transition metal, A is an element such as Aluminum or silicon, and X is either carbon or nitrogen. Researchers have termed these ductile and machine able ceramics MAX phases. MXenes, discovered in 2011, are ceramics that comprise one of the largest families of two-dimensional materials. MXenes are made from a bulk crystal called MAX. Unlike most 2D ceramics, MXenes have inherently good conductivity because they are molecular sheets made from the carbides and nitrides of transition metals like titanium. This gives them exciting potential in next-generation energy storage applications. Titanium Aluminum Carbide Maxene Powder of Application： Maxenes and MXenes-based nanocomposites have been widely used in nano-adsorption, biosensors, ion sieving, catalysis, lithium-ion batteries, supercapacitors, lubrication, and many other fields. RELATED INFORMATION Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please email us for the customization. Email: contact@nanochemazone.com
Titanium Boride Micro Powder
Product Name: Titanium Boride Micro Powder
| Product Name | Titanium Boride Micro Powder |
| Catalog No. | NCZ-NSC307/20 |
| CAS No. | 12045-63-5 |
| Purity | 99.9% |
| APS | 3µm, 500µm (Customizable) |
| Molecular Formula | TiB2 |
| Appearance | Powder |
| Color | Gray Powder |
| Density | 4.52 g/mL |
| Melting Point | 2980 °C |
Titanium Boride Micro Powder Description:
Titanium Boride Micro is electrical conductivity composite materials--Electrical conduction boron nitride named evaporation boat made by titanium diboride and boron nitride is the primary member for vacuum aluminizing equipment; Ceramic cutting tools and their components--Titanium diboride ceramic is used for metal wortles, extrusion dies, sandblasting nozzles, potted components and cutting tools; Composite ceramic materials--It could be used as multi-element composite materials’ important constituent element.
It can be made up of cutting tools’ composite materials with TIC, TIN, or SIC. And it is as a component to make armor protection materials.
It is the best materials for thermostability components and function devices; Aluminium electrolysis’ cathode materials--Because of the good wet ability of TIB2 and metal aluminum liquid.
It makes the electrolytic aluminum’s power consumption low, then the electrolytic bath's life will belong.
It may also make up PIC exothermic materials and flexibility PIC materials, and it is the intensify reagent of the metal materials such as Al, Fe, and Cu. Products Performance:
It is a new ceramic material. And it has excellent physical and chemical performance. Such as a high melting point ( 2980 °C), high hardness ( 34 GPa), and its density is 4.52 g/cm3.
It could stand wear and tear, also resist acid-alkali. Its electric performance is good (P=14.4μΩ.cm), heat-conducting property is strong (25J/m.s.k).
And it has excellent chemical stability and thermal shock resistant performance.
Titanium diboride and its composite materials are innovative and high technology materials that were widely concerned and putative that have promotional value and application prospects.
Titanium Boride Micro Powder Related Information:
Airtight sealed, avoid light and keep dry at room temperature. Please contact us for customization and price inquiry Email: contact@nanochemazone.com Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Titanium carbide (Ti3C2) MXene freestanding thin films
Product Name: Ti3C2 Titanium carbide freestanding thin films
Ti3C2 Mxene thin films
| Product | Titanium carbide (Ti3C2) freestanding thin films |
| Colour | Black wafer |
| Thickness | 5-10 µm |
| Diameter | ≈45 mm |
| Product Code | NCZ-MX-103 |
Titanium carbide (Ti3C2) MXene freestanding thin films APPLICATION FIELDS
Flexible electronic devices (sensors, capacitors), flexible batteries, etc. It also can be used to deposit other materials as composite materials and separation membranes for seawater separation.Titanium carbide (Ti3C2) MXene freestanding thin films RELATED INFORMATION
Storage Conditions: Sealed, avoid light, Argon protection, and keep dry at room temperature. Expiry date: Three months.
Titanium Carbide Powder
Product Name: Titanium Carbide Powder
| Product | Titanium Carbide Powder |
| CAS No. | 12070-08-5 |
| Appearance | Powder |
| Purity | 99.9% |
| APS | 1 – 5 microns (can be customized) |
| Ingredient | TiC |
| Product Code | NCZ-AE-208 |
Titanium Carbide Powder
Titanium Carbide Powder
Product Name: Titanium Carbide Powder
| Product | Titanium Carbide Powder |
| Colour | Grey |
| Purity | ≥ 99.9% |
| Particle size | 1-10 µM (customizable) |
| Ingredient/MF | TiC |
| Product Code | NCZ-C-106/20 |
| CAS Number | 12070-08-5 |
Titanium Carbide Powder Description :
Titanium Carbide (TIC) is a Gray metallic powder with a cubic system structure. With high-wear resistance, perfect corrosion resistance and high-temperature resistance, As hardness material, it’s widely used as the thermal spray coating powder material, the welding material, the flinty membranous material, the military aviation material, the hard alloy, and the cermet. Titanium carbide, TiC, is an extremely hard (Mohs 9-9.5) refractory ceramic material, similar to tungsten carbide. It has the appearance of black powder with the sodium chloride (face-centered cubic) crystal structure. Also, the product has good conductivity and chemical inert ability to steel and ironApplication of Titanium Carbide TiC:
1. The carbide is mainly used in the manufacturing of cermet, heat-resistant alloy, and cemented carbide due to its high melting point, high hardness, and good chemical stability.- Applies in the spray coating material, the welding material, the flinty membranous material, the military aviation material, the hard alloy, and the cermet.
- Used in the preparation of cermets, which are frequently used to machine steel materials at high cutting speed.
- Used as an abrasion-resistant surface coating on metal parts, such as tool bits and watch mechanisms.
- Used as a heat shield coating for atmospheric reentry of spacecraft.
Titanium Carbide Tungsten Carbide Alloy Nanopowder
| Product Formula | TiC: WC |
| Product Number | NCZ-A-143-19 |
| CAS Number | 12070-08-5/12070-12-1 |
| Molecular Weight | 255.72 g/moL |
| APS | ≤ 80 nm (can be customized) |
| Purity | 99.9% |
| Color | Gray |
| Form | Nanopowder |
Note: We can manufacture and supply different particle sizes (Nano size range, Micron, Submicron and different Mesh size) products of Alloy powders (Multi Element, Multi Element Oxide and Mixture of Rare Earth Elements) according to client’s requirements. Kindly ask for the customization in size and Element ratio composition.
Titanium Diboride Nanopowder
Titanium Diboride Nanopowder
Product Name: Titanium Diboride Nanopowder (TiB2, Purity: >99.9%, APS: < 80 nm)
| Product | Titanium Diboride Nanopowder |
| Cat No | NCZ-MN-108/20 |
| CAS | 12045-63-5 |
| APS | < 80 nm (Can be Customized) |
| Purity | >99.9 % |
| Molecular Formula | TiB2 |
| Molecular Weight | 69.489 g/mol |
| Form | Powder |
| Color | Gray |
| Density | 4.52 g/cm³ |
| Melting Point | 3230 °C |
| Poisson's Ratio | 0.11 |
| Young's Modulus | 290 GPa |
| Solubility | Insoluble in water |
Titanium Dioxide Anatase Powder
Product Name: Titanium Dioxide Anatase Powder
| Product | Titanium Dioxide Anatase Powder |
| CAS No. | 13463-67-7 |
| Appearance | Powder |
| Purity | 99.9% |
| APS | 1 – 5 Microns (Can be customized) |
| Ingredient | TiO2 Anatase |
| Product Code | NCZ-AE-129 |
Titanium Dioxide Dispersions
| MF: | TiO2 |
| Chemical Name: | Titanium Dioxide Dispersion Rutile |
| Purity: | >99.99% |
| APS: | 15-30 nm (Size Customization possible) |
| Form: | Nano dispersion |
| Product Number: | NCZD2901 |
| CAS Number | 13463-67-7 |
Titanium Dioxide Nanoparticles Dispersion
| MF: | TiO2 |
| Chemical Name: | Titanium Dioxide Dispersion Anatase |
| Purity: | >99.99% |
| APS: | 15-30 nm (Size Customization possible) |
| Form: | Nano dispersion |
| Product Number: | NCZD2902 |
| CAS Number | 13463-67-7 |
Titanium Dioxide Nanorods
Titanium Dioxide Nanorods
| Product | Titanium Dioxide Nanorods |
| Stock No. | NCZR102-19 |
| Length: ca. | 100 nm (customization available) |
| Diameter: | 20-40 nm (customization available) |
| CAS Number | 13463-67-7 |
| Formula | TiO2 |
| Density | 4.23g/cm3 |
| Melting Point | 1,843 ˚C |
| Boiling Point | 2972 ˚C |
| Form | Powder/Dispersion |
Titanium Dioxide Nanowire
| MF: | TiO2 |
| Chemical Name: | Titanium Dioxide Nanowire |
| Purity: | > 99.99% |
| Diameter: | 50-100 nm (Customization is possible) |
| Length: | 80 µm (Customization is possible) |
| Form: | Nanowire |
| Product Number: | NCZW119 |
| CAS Number | 13463-67-7 |
Titanium Dioxide Paste
Titanium Dioxide Paste
| Linear Formula: | TiO2 |
| Chemical Name: | Titanium Dioxide Paste |
| Purity: | >99.99% |
| Molecular Weight | 79.9378 g/mol |
| Melting Point | 1843 °C |
| Product Number: | NCZ-P-102 |
| Appearance: | White to Yellow Paste |
| CAS Number: | 13463-67-7 |
Titanium Dioxide Powder
Product Name: Titanium Dioxide Powder
| Product |
Titanium Dioxide Powder |
| Colour | white |
| Purity | ≥ 99.9% |
| Particle size | 1-10µM (customizable) |
| Ingredient/MF | TiO2 |
| Product Code | NCZ-CS-141/20 |
| CAS Number | 13463-67-7 |
Titanium Dioxide Ultrafine Titania Powder
Product Name: Titanium Dioxide Ultrafine Titania Powder
| Product | Titanium Dioxide Ultrafine Titania Powder |
| CAS No. | 13463-67-7 |
| Appearance | Powder |
| Purity | 99.9% |
| APS | 1 – 5 microns (can be customized) |
| Ingredient | TiO2 |
| Product Code | NCZ-AE-210 |
Titanium Disilicide TiSi2
Titanium Disilicide TiSi2 Nanoparticles
Nano Titanium Disilicide
| MF | TiSi2 |
| Chemical Name | Titanium Disilicide |
| Purity | ≥ 99% |
| APS | 50-100 nm, 1 to 5 um, 10 um, 325 Mesh (Size Customization possible) |
| Form | Gray Powder |
| Product Number | NCZ3248-20 |
| CAS Number | 12039-83-7 |
Note: We supply different products of microparticles and Nanoparticles powder in all sizes range according to the client’s requirements.
Titanium Disilicide Powder
Titanium hydride Powder
Product Name: Titanium hydride Powder
| MF: | TiH2 |
| Chemical Name |
Titanium hydride Powder |
| Color | Black Powder |
| Particle size: | 10-320 mesh |
| Purity: | 99.9% |
| Molecular Mass: | 49.883 g/mol |
| Product Number: | NCZ-NSC-125/20 |
| Cas Number: | 7704-98-5 |
Titanium hydride Powder RELATED INFORMATION
Titanium hydride powder for ice fountain and stage fireworks, with no smell no smoke no dust effects. 1) Quality: High grade & purity 2) Application: cakes, shell, fountain fireworks, etc., 3) Price: Factory cost price 4) Particle size: from 10-320 mesh 5) Delivery: 15-30 days after order confirm 6) Applications: Mainly for indoor fireworks with no smoke and no smell effects. mainly use for birthday cakes candles fireworks, stage fireworks, ice fountains, etc. with no smell, no smoke, and no dust Please email us for the customization. Email: contact@nanochemazone.com Please contact us for customization and price inquiry Note: We supply different size ranges of nano and micron size powder as per the client’s requirements and also accept customization in various parameters.
Titanium Iron Powder
Product Name: Titanium Iron Powder
| Product | Titanium Iron Powder |
| CAS No. | 7440-32-6 |
| Appearance | Powder |
| Purity | 99.9% |
| APS | 1 – 5 Microns (Can be customized) |
| Ingredient | Ti |
| Product Code | NCZ-AE-165 |
Titanium Metal Foil
| Materials | Titanium Metal Foil |
| Stock No. | NCZ-F-0012 |
| CAS | 7440-32-6 |
| Purity | ≥ 99.9% |
| Thickness | 12 μm, customization is available on demand |
| Width | 30~500 mm, customization is available on demand |
| Surface density | 4.506 g/cm3 |
| Melting Point | 1668 °C |
| Boiling Point | 3287 °C |
| Joint | 1pcs/roll |
| Polished | One/Both Side Polished |
| Polished | One Side Coarse |