Shop
Mo2Ti2AlC3 MAXene Powder
Product Name: Mo2Ti2AlC3 MAXene Powder
| Product | Mo2Ti2AlC3 MAXene Powder |
| CAS No. | 12316-56-2 |
| Appearance | Powder |
| Purity | 99% |
| APS | 1 – 5 microns (can be customized) |
| Ingredient | Mo2Ti2AlC3 |
| Product Code | NCZ-MX-320 |
Mo2Ti2AlC3 MAXene Powder INTRODUCTION:
MAX phase ceramics (including titanium silicon carbide, Ti3AlC2 materials, etc.) are a new type of processing conductive ceramic materials that have attracted much attention.
These ceramics contain more than sixty kinds of ternary carbides or nitrides.
M represents the transitional front metal elements. ; A represents the main group element, mainly the elements of the third main group and the fourth main group; X represents a carbon or nitrogen element.
Among them, Ti3SiC2 is the most widely studied. Ti3SiC2 was successfully synthesized by the hot pressing method in 1996 by Professor Barsoum M of Drexel University in the United States, and its excellent performance was found.
Due to the unique nano-layered crystal structure, these ceramic materials have antioxidant, self-lubricating properties, high room temperature fracture toughness, and electrical conductivity.
Such materials can be widely used as high-temperature structural materials, electrode brush materials, chemical anticorrosive materials, and high-temperature heating elements.
The products are mainly used for high-temperature coating, MXene precursor, conductive self-lubricating ceramic, lithium-ion battery, supercapacitor, electrochemical catalysis.
Mo2Ti2AlC3 MAXene Powder RELATED INFORMATION:
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please email us for the customization.
Email: contact@nanochemazone.com
Mo2TiAlC2 MAXene Powder
Product Name: Mo2TiAlC2 MAXene Powder
Product Code: NCZ-MX-214A
| Product | Mo2TiAlC2 MAXene |
| Colour | Black Powder |
| Purity | ≥98 wt% |
| Ingredient | Mo2TiAlC2 |
| CAS NO | 12316-56-2 |
Mo2TiAlC2 MAXene Powder APPLICATION FIELDS:
High-temperature coating, Mxene precursor, conductive self-lubricating ceramic, lithium-ion battery, supercapacitor, electrochemical catalysis.
RELATED INFORMATION:
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please email us for the customization.
Email: contact@nanochemazone.com
Mo2TiC2 MXenes Powder
Product Name: Mo2TiC2 MXenes Powder
| Product | Mo2TiC2 MXene Powder |
| CAS No. | 12316-56-2 |
| Appearance | Powder |
| Purity | 99% |
| APS | 1 – 5 microns (can be customized) |
| Ingredient | Mo2TiC2 |
| Product Code | NCZ-MX-304 |
Mo2TiC2 MXenes Powder APPLICATION:
Energy Storage Catalysis, Analytical Chemistry, Mechanics, adsorption, etc.
RELATED INFORMATION
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please email us for the customization.
Email: contact@nanochemazone.com
Mo3AlC2 MAXene Powder
Product Name: Mo3AlC2 MAXene Powder
| Product | Mo3AlC2 MAXene |
| Colour | Black Powder |
| Purity | ≥98 wt% |
| Ingredient | Mo3AlC2 |
| Product Code | NCZ-MX-116 |
Mo3AlC2 MAXene Powder APPLICATION FIELDS:
High-temperature coating, MXene precursor, conductive self-lubricating ceramic, lithium-ion battery, supercapacitor, electrochemical catalysis.
RELATED INFORMATION
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please email us for the customization.
Email: contact@nanochemazone.com
Mo3AlC2 MAXene Powder
Product Name: Mo3AlC2 MAXene Powder
Product Code: NCZ-MX-215
| Product | Mo3AlC2 MAXene |
| Colour | Black Powder |
| Purity | ≥98 wt% |
| Ingredient | Mo3AlC2 |
| CAS NO | 12316-56-2 |
Mo3AlC2 MAXene Powder APPLICATION FIELDS
High-temperature coating, Mxene precursor, conductive self-lubricating ceramic, lithium-ion battery, supercapacitor, electrochemical catalysis.
RELATED INFORMATION
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please email us for the customization.
Email: contact@nanochemazone.com
Mo3C2 MXene Powder
Product Name: Mo3C2 MXene Powder
Product Code: NCZ-MX-217
| Product | Mo3C2 MAXene |
| Colour | Black Powder |
| Purity | ≥98 wt% |
| Ingredient | Mo3C2 |
| CAS NO | 12316-56-2 |
Mo3C2 MXene Powder APPLICATION FIELDS
High-temperature coating, Mxene precursor, conductive self-lubricating ceramic, lithium-ion battery, supercapacitor, electrochemical catalysis.
RELATED INFORMATION
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please email us for the customization.
Email: contact@nanochemazone.com
MoAlB MAXene Powder
Product Name: MoAlB MAXene Powder
Product Code: NCZ-MX-205
| Product |
MoAlB MAXene Powder |
| Colour | Black Powder |
| Purity | ≥98 wt% |
| Ingredient | MoAlB |
| CAS NO | 12316-56-2 |
APPLICATION FIELDS
High-temperature coating, Mxene precursor, conductive self-lubricating ceramic, lithium-ion battery, supercapacitor, electrochemical catalysis.
RELATED INFORMATION
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please email us for the customization.
Email: contact@nanochemazone.com
Molybdenum Boride Powder
Molybdenum Boride Powder
Product Name: Molybdenum Boride Powder
| MF: | Tr-MoB2 |
| Chemical Name | Molybdenum Boride Powder |
| Color | Yellow Gray |
| EINECS No.: | 234-502-8 |
| Purity: | 99.9% |
| Density: | 9.26 g/ cm3 |
| Product Number: | NCZ-NMB-112/20 |
| Cas Number: | 12006-99-4 |
Molybdenum Boride Powder
RELATED INFORMATION
It's mainly used as an additive of electronic tungsten, molybdenum alloy, etc., and can also be used in the manufacture of wear semiconductor thin film and coating materials.
Please email us for the customization.
Email: contact@nanochemazone.com
Please contact us for customization and price inquiry
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Molybdenum Boride Powder
Molybdenum Boride Powder
Product Name: Molybdenum Boride Powder
| MF: | Tr-MoB2 |
| Chemical Name | Boride Powder |
| Color | Yellow Gray |
| EINECS No.: | 234-502-8 |
| Purity: | 99.9% |
| Density: | 9.26 g/ cm3 |
| Product Number: | NCZ-NMB-112/20 |
| Cas Number: | 12006-99-4 |
RELATED INFORMATION
It's mainly used as an additive of electronic tungsten, molybdenum alloy, etc., and can also be used in the manufacture of wear semiconductor thin film and coating materials.
Please email us for the customization.
Email: contact@nanochemazone.com
Please contact us for customization and price inquiry
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Molybdenum Boride Powder
Molybdenum Boride Powder
Product Name: Molybdenum Boride Powder
| Product | Molybdenum Powder |
| CAS No. | 12006-98-3 |
| Appearance | Grey Powder |
| Purity | 99.9% |
| APS | 1 – 5 Microns (Can be customized) |
| Ingredient | MoB |
| Product Code | NCZ-NSC-237/20 |
Description of Molybdenum Boride Powder:
Molybdenum Powder have been used as hard coating materials for high-temperature structural applications, and also in the form of MoB/CoCr cermet coatings. It is also used as a brazing material especially in electric components. Molybdenum boride has potential industrial applications such as abrasive, corrosion resistance.
Molybdenum (atomic symbol: Mo, atomic number: 42) is a Block D, Group 6, Period 5 element with an atomic weight of 95.96. Molybdenum Bohr Model. The number of electrons in each of the molybdenum's shells is and its electron configuration.
its elemental form, molybdenum has a gray metallic appearance. Elemental Molybdenum It has the third-highest melting point of any element, exceeded only by tungsten and tantalum. Molybdenum does not occur naturally as a free metal; it is found in various oxidation states in minerals. The primary commercial source of molybdenum is molybdenite, although it is also recovered as a byproduct of copper and tungsten mining. The origin of the name Molybdenum comes from the Greek word molubdos meaning lead.
Related Information of Molybdenum Powder
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Molybdenum Carbide Powder
Product Name: Molybdenum Carbide Powder
| Product | Molybdenum Carbide Powder |
| CAS No. | 12069-89-5 |
| Appearance | Powder |
| Purity | 99.9% |
| APS | 1 – 5 microns (can be customized) |
| Ingredient | Mo2C |
| Product Code | NCZ-AE-179 |
RELATED INFORMATION
Storage Conditions:
Airtight sealed, avoid light, and keep dry at room temperature.
Please email us for the customization.
Email: contact@nanochemazone.com
Molybdenum Disilicide MoSi2
Molybdenum Disilicide Nanoparticles
| MF | MoSi2 |
| Chemical Name | Molybdenum Disilicide MoSi2 |
| Purity | ≥ 99% |
| APS | 50-100 nm, 1 to 5 um, 10 um, 325 Mesh (Size Customization possible) |
| Form | Gray Powder |
| Product Number | NCZ3246-20 |
| CAS Number | 12136-78-6 |
Molybdenum Disilicide MoSi2
Note: We supply different products of microparticles and Nanoparticles powder in all sizes range according to the client’s requirements.
MoSi2 is the intermediate phase of the Mo-Si binary alloy system with the highest content of silica. It has the characters of both metal and ceramic. MoSi2 has good high-temperature oxidation resistance, high-temperature plasticity, heat-conductibility, electro-conductibility, and mobility. And it has a wide range of applications in high-temperature structural ceramics. MoSi2 is mainly used as a heating element, integrated circuit, high-temperature oxidation resistant coating, and high-temperature structural materials. As a structural material, MoSi2 can be used in aviation, spaceflight, high-temperature components of automobile gas turbines. Spherical molybdenum disilicide is the core product.
Molybdenum Disulfide (MoS2) Powder, MoS2
Molybdenum Disulfide (MoS2) Quantum Dots
Molybdenum Disulfide Dispersion
Molybdenum Disulfide Dispersion
Molybdenum Disulfide Dispersion
| Product |
Molybdenum Disulfide Dispersion |
| CAS No. | 1317-33-5 |
| Appearance | Black |
| Purity | 99.9% |
| APS | 400nm, 800nm, 1500nm, 3000nm, 6000nm (Can be customized) |
| Ingredient | MoS2 |
| Product Code | NCZ-NSC503/20 |
Molybdenum Disulfide Dispersion
Molybdenum Disulfide Nanoparticle Dispersions are suspensions of molybdenum disulfide nanoparticles in water or various organic solvents such as ethanol or mineral oil. Nanochemazone manufactures oxide nanopowders and nanoparticles with typical particle sizes ranging from 10 to 200nm and in coated and surface functionalized forms.
Our nanodispersion and nanofluid experts can provide technical guidance for selecting the most appropriate particle size, solvent, and coating material for a given application. Molybdenum Disulfide Nanopowder as a solid lubricant, one reason is of its layered structure, between layers of sulfur atoms combined with weak easy-to-slide and showed good friction-reducing effect; the second reason, exposure sulfur atoms of the crystal surface on the metal surface have a very strong adhesion to form a very solid film, therefore lubrication is superior to other general-lubricating materials.
As compared with ordinary molybdenum disulfide, Nano molybdenum disulfide has many excellent properties, such as : excellent friction, large active surface area, more adsorption capacity, high reactivity, catalytic properties, especially the performance of catalytic hydrogenation desulfurization more, can be used to prepare special materials, catalytic materials and gas storage.
In nano-layers of molybdenum disulfide into the other groups after the formation of intercalated nano-composite materials have many excellent physical properties (such as light, electricity, magnetism, catalysis, lubrication and other functions). With MoS2 particle size becomes smaller, it is attached to the surface of the friction material and the coverage has increased significantly, anti-wear friction properties has also been significantly improved. We can also produce custom nanomaterials tailored to the specific requirements of our customers upon request.
Related Product :
Molybdenum Disulfide MoS2 Nanoparticles / Nanopowder (MoS2, 100nm, 99.9%, black)
Molybdenum Disulfide Powder / MoS2 Powder (MoS2, 800nm-1.2um, 99.9%, black)
Molybdenum Disulfide Powder / MoS2 Powder (MoS2, 6um, 99.9%, black)
Molybdenum Disulfide MoS2 Nanoparticles / Nanopowder 30wt% Water Dispersion
Molybdenum Disulfide MoS2 Nanoparticles / Nanopowder 30wt% Ethanol Dispersion
Molybdenum Disulfide MoS2 Nanoparticles / Nanopowder 30wt% Ethylene Glycol Dispersion
Molybdenum Disulfide MoS2 Nanoparticles / Nanopowder 30wt% NMP Dispersion
Molybdenum Disulfide MoS2 Nanoparticles / Nanopowder 30wt% Mineral Oil Dispersion
Related Information
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Molybdenum Disulfide Powder
Product Name: Molybdenum Disulfide Powder
| Product | Molybdenum Disulfide Powder |
| CAS No. | 1317-33-5 |
| Appearance | Powder |
| Purity | 99.9% |
| APS | 1 – 5 Microns (Can be customized) |
| Ingredient | MoS2 |
| Product Code | NCZ-AE-130 |
RELATED INFORMATION
Storage Conditions:
Airtight sealed, avoid light, and keep dry at room temperature.
Please email us for the customization.
Email: contact@nanochemazone.com
Molybdenum Disulfide Powder
Molybdenum Disulfide Powder
Product Name: Molybdenum Disulfide Powder
| Product Name | Molybdenum Disulfide Powder |
| Catalog No. | NCZ-NSC303/20 |
| CAS No. | 1317-33-5 |
| Purity | 99.9% |
| APS | 200 to 300 nm, 500 nm-800 nm, 1 - 5 µm (Customizable) |
| Molecular Formula | MoS2 |
| Molecular weight | 160.07 g/mol |
| Appearance | Powder |
| Color | Black Powder |
| Density | 5.06 g/cm³ |
| Melting Point | 1185 ° C (2165 ° F) |
Description of Molybdenum Disulfide Powder
Molybdenum disulfide (or moly) is an inorganic compound composed of molybdenum and sulfur. Its chemical formula is mos. The compound is classified as a transition metal dichalcogenide. It is a silvery black solid that occurs as the mineral molybdenite, the principal ore for molybdenum. is relatively unreactive. It is unaffected by dilute acids and oxygen. In appearance and feel, molybdenum disulfide is similar to graphite.
It is widely used as a dry lubricant because of its low friction and robustness. Bulk mos. is a diamagnetic, indirect bandgap semiconductor similar to silicon, with a bandgap MoS2 is naturally found as either molybdenite, a crystalline mineral, or jordanite, a rare low-temperature form of molybdenite. Molybdenite ore is processed by flotation to give relatively pure Mos. the main contaminant is carbon. MOs also arises by thermal treatment of virtually all molybdenum compounds with hydrogen sulfide or elemental sulfur and can be produced by metathesis reactions from molybdenum pentachloride.
MoS2 excels as a lubricating material (see below) due to its layered structure and low coefficient of friction. Interlayer sliding dissipates energy when shear stress is applied to the material. Extensive work has been performed to characterize the coefficient of friction and shear strength of MoS2 in various atmospheres.
The shear strength of MoS2 increases as the coefficient of friction increases. This property is called superlubricity. At ambient conditions, the coefficient of friction for MoS2 was determined to be 0.150, with a corresponding estimated shear strength of 56.0 MPa. Direct methods of measuring the shear strength indicate that the value is closer to the wear resistance of MoS2 in lubricating applications can be increased by doping MoS2 with chromium.
Flakes thinner than 5 layers undergo homogenous bending and rippling, while flakes around 10 layers are thickly delaminated through interlayer sliding. Flakes with more than 20 layers exhibited a kinking mechanism during micromechanical cleavage. The cleavage of these flakes was also determined to be reversible due to the nature of van der Waals bonding.
Related Information of Molybdenum Disulfide Powder:
Storage Conditions
Airtight sealed, avoid light, and keep dry at room temperature.
Please contact us for customization and price inquiry Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Molybdenum Disulfide Powder, MoS2
Molybdenum Dithiophosphate Powder
Molybdenum Dithiophosphate Powder
Product Name: Molybdenum Dithiophosphate Powder
| Product | Molybdenum Dithiophosphate |
| CAS No. | 72030-25-2 |
| Appearance | Claybank liquid |
| Purity | 99.9% |
| APS | 1 – 5 Microns (Can be customized) |
| Ingredient | MoDTP |
| Product Code | NCZ-NSC-148/20 |
Description :
Molybdenum Dithiophosphate Powder
Nanohuier-011 MoDDP is a synthesized oil-soluble liquid organic molybdenum anti-friction & oxidation resistance additive, produced with advanced process. It is applicable in internal engine oil, gear oil, lubricating grease, and other industrial oil. It can improve lubricant anti-friction significantly; can decrease the abrasion of friction pair surface efficiently; it also has favorable oxidation resistance under high temperature.
RELATED INFORMATION
Storage Conditions:
Airtight sealed, avoid light, and keep dry at room temperature.
Please email us for the customization.
Email: contact@nanochemazone.com
Note: We supply different size ranges of nano and micron size powder as per the client’s requirements and also accept customization in various parameters.
Molybdenum Iron Powder
Product Name: Molybdenum Iron Powder
| Product | Molybdenum Iron Powder |
| CAS No. | 7439-98-7 |
| Appearance | Powder |
| Purity | 99.9% |
| APS | 1 – 5 microns (can be customized) |
| Ingredient | FeMo65 |
| Product Code | NCZ-AE-204 |
CHARACTERISTICS:
the ferroalloy composed of molybdenum and iron is used as the additive of molybdenum element in steel-making. The addition of molybdenum to steel can make the steel have uniform fine grain structure, improve the hardenability of steel, and help to eliminate temper brittleness. The strength and wear resistance of cast iron can be increased by adding it.
APPLICATION:
It is used for metallurgy, machinery, aviation, lubricants, binders, brush paint, refractory materials, electrical carbon products, battery materials, etc.
RELATED INFORMATION
Storage Conditions:
Airtight sealed, avoid light, and keep dry at room temperature.
Please email us for the customization.
Email: contact@nanochemazone.com
Molybdenum Metal Powder
Molybdenum Metal Powder
Product Name: Molybdenum Metal Powder
| Product | Molybdenum Metal Powder |
| Colour | Black |
| Purity | ≥ 99.99% |
| Particle size | 1-10 µM (customizable) |
| Ingredient/MF | Mo |
| Product Code | NCZ-CE-167/20 |
| CAS Number | 7439-98-7 |
Application of Molybdenum Powder:
1.Thermal spraying of materials, thick film ink, metal injection moulding.
- Molybdenum metal powder can be widely used in cemented carbide, diamond tools, high temperature alloys, magnetic materials and so on.
3.Nano-grade molybdenum powder has good weather resistance, low electrolyte content, and stable PH value, which can improve wear resistance and corrosion resistance.
4. Increase the toughness of zirconia ceramics.
Please email us for the customization.
Email: contact@nanochemazone.com
Please contact us for customization and price inquiry
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Molybdenum Nano Powder
Product Name: Molybdenum Nano Powder
| Product | Molybdenum Nano Powder |
| Colour | Black |
| Purity | ≥ 99.99% |
| Particle size | 1-10 µM (customizable) |
| Ingredient/MF | Mo |
| Product Code | NCZ-CE-166/20 |
| CAS Number | 7439-98-7 |
Application of Molybdenum Nanopowder:
- Molybdenum powder is used in the paper industry, which could make the paper brightness, solid structure, Lee writing, coating uniformity, low degree of friction, easy to moisture and easy to dry.
- Molybdenum powder filler is very important, especially in Europe, 60% mineral filler and booster of the market. The main purpose of molybdenum powder filler is used in the field of plasticized PVC.
- Molybdenum nano particles is also used in paint and coating. Molybdenum powder paint is important filler for paint. Fineness particle size and particle distribution play very important role in the transparency of the paint. Molybdenum powder has good weather resistance, wear-resistant, low electrolyte content, PH stabilizing effect, which can improve the corrosion resistance and mobility. Molybdenum powder is also very important in water-based paint series, it can improve the quick-drying performance, crossed the road has important significance in terms.
- The use of molybdenum nano powder in the paint can reduce the amount of titanium dioxide, from the viewpoint of economically advantageous. This will further stimulate growth in the amount of molybdenum powder paint.
Please email us for the customization.
Email: contact@nanochemazone.com
Please contact us for customization and price inquiry
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Molybdenum Nanoparticles
Molybdenum Nanoparticles
Molybdenum Nanopowder
Nano Molybdenum powder
| MF: | Mo |
| Chemical Name: | Molybdenum |
| Purity: | > 99.99% |
| APS: | 50 nm (Size Customization possible) |
| Form: | Nanopowder |
| Product Number: | #NCZ4301 |
| CAS Number | 7439-98-7 |
Note: We supply different products of microparticles and Nanoparticles powder in all size range according to client’s requirements.
Molybdenum Oxide Nanoparticles
Molybdenum Oxide Nanoparticles
| MF: | MoO3, MoO2 |
| Chemical Name: | Molybdenum Oxide |
| Purity: | >99.99% |
| APS: | 50 nm (Size Customization possible) |
| Form: | Nanopowder |
| Product Number: | #NCZ4401 |
| CAS Number | 1313-27-5 |
Note: We supply different products of microparticles and Nanoparticles powder in all sizes range according to the client’s requirements.
Molybdenum Pentachloride (Molybdenum Chloride, MoCl5, 99%)
Molybdenum Penta Chloride Powder
| Product | Molybdenum Penta chloride Powder |
| Formula | MoCl5 |
| Stock No. | NCZM102-19 |
| Purity | ≥99% |
| CAS Number | 10241-05-1 |
| Mo: Cl: | ~35%: ~65% |
| Boiling Point | 268 ˚C |
| Melting Point | 194 ˚C |
| Density | 2.928 g/cm3 at 25 ˚C |
| Size | Micro and Nano Range available |
Molybdenum Pentachloride Powder Nano and Micro Size
Note: We can supply different size products of micro and Nano Size range powder according to client’s requirements.
Molybdenum Powder
Product Name: Molybdenum Powder
| Product | Molybdenum Powder |
| CAS No. | 7439-98-7 |
| Appearance | Powder |
| Purity | 99.9% |
| APS | 1 – 5 microns (can be customized) |
| Ingredient | Mo |
| Product Code | NCZ-AE-219 |
APPLICATION
Spraying molybdenum powder is used as the raw material of molybdenum and molybdenum alloy products, such as large molybdenum slab, molybdenum silicon carbide electric heating element, silicon controlled wafer, molybdenum top and other raw materials. The spray molybdenum powder is used for surface spraying of automobile gear, piston ring, clutch and other wear-resistant parts, and it can also be used with other spray welding materials.
RELATED INFORMATION
Storage Conditions:
Airtight sealed, avoid light, and keep dry at room temperature.
Please email us for the customization.
Email: contact@nanochemazone.com
Molybdenum Silicide Powder
Product Name: Molybdenum Silicide Powder
| Product | Molybdenum Silicide Powder |
| CAS No. | 12136-78-6 |
| Appearance | Powder |
| Purity | 99.9% |
| APS | 1 – 5 microns (can be customized) |
| Ingredient | MoSi2 |
| Product Code | NCZ-AE-240 |
RELATED INFORMATION
Storage Conditions:
Airtight sealed, avoid light, and keep dry at room temperature.
Please email us for the customization.
Email: contact@nanochemazone.com
Molybdenum Telluride Powder
Molybdenum Telluride Powder
| Product |
Molybdenum Telluride |
| CAS No. | 12058-20-7 |
| Appearance | Black |
| Purity | 99% |
| APS | 1-5µM (Can be customized) |
| Ingredient | MoTe2 |
| Product Code | NCZ-NSC677/20 |
| Molecular Weight | 351.14 g/mol |
| Density | 7.7 g/cm³ |
| Melting Point | Decomposes |
Molybdenum Telluride Description:
Molybdenum is a Block D, Group 6, Period 5 element with an atomic weight of 95.96. Molybdenum Bohr Model. The number of electrons in each of molybdenum's shells is [2, 8, 18, 13, 1] and its electron configuration is 4d5 5s1.
The molybdenum atom has a radius of 139 pm and a Van der Waals radius of 209 pm. In its elemental form, molybdenum has a gray metallic appearance. Molybdenum is the 54th most abundant element in the earth's crust.
MolybdenumIt has the third highest melting point of any element, exceeded only by tungsten and tantalum. Molybdenum does not occur naturally as a free metal, it is found in various oxidation states in minerals.
The primary commercial source of molybdenum is molybdenite, although it is also recovered as a byproduct of copper and tungsten mining. The origin of the name Molybdenum comes from the Greek word molubdos meaning lead.
Related Information
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Molybdenum Trioxide Nanoparticles
Molybdenum Trioxide Nanoparticles
Product Name: Molybdenum Trioxide Nanoparticles (MoO3, Purity: 99.9 %, APS: < 80nm)
| Product | Molybdenum Trioxide Nanopowder |
| Cat No | NCZ-CP-530/20 |
| CAS No | 1313-27-5 |
| Purity | 99.9% |
| APS | < 80nm (Can be Customized) |
| Molecular Formula | MoO3 |
| Molecular Weight | 143.95 g/mol |
| Form | Powder |
| Color | Light White |
| Density | 4.69 g/cm³ |
| Melting Point | 795 °C |
| Boiling Point | 1155 °C |
| Solubility | Soluble in water |
Molybdenum Trioxide Nanoparticles
Please email us for the customization.
Email: contact@nanochemazone.com
Please contact us for customization and price inquiry
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Molybdenum Trioxide Powder
Product Name: Molybdenum Trioxide Powder
| Product | Molybdenum Trioxide Powder |
| CAS No. | 1313-27-5 |
| Appearance | Powder |
| Purity | 99.9% |
| APS | 1 – 5 microns (can be customized) |
| Ingredient | MoO3 |
| Product Code | NCZ-AE-183 |
DESCRIPTION
Molybdenum Oxide is used as catalyst of petroleum industry, plastic fire retardant, smelting material of molybdenum, the basic material of various high pure molybdic compound.
RELATED INFORMATION
Storage Conditions:
Airtight sealed, avoid light, and keep dry at room temperature.
Please email us for the customization.
Email: contact@nanochemazone.com
Molybdenum Trioxide Powder
Molybdenum Trioxide Powder
Product Name: Molybdenum Trioxide Powder (MoO3, Purity: 99.9 %, APS: < 80nm)
| Product | Nano Molybdenum Oxide Powder |
| Cat No | NCZ-CP-531/20 |
| CAS No | 1313-27-5 |
| Purity | 99.9% |
| APS | < 80nm (Can be Customized) |
| Molecular Formula | MoO3 |
| Molecular Weight | 143.95 g/mol |
| Form | Powder |
| Color | Yellow or light blue |
| Density | 4.69 g/cm³ |
| Melting Point | 795 °C |
| Boiling Point | 1155 °C |
| Solubility | Soluble in water |
Please email us for the customization.
Email: contact@nanochemazone.com
Please contact us for customization and price inquiry
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Molybdenum Zinc Oxide
Molybdenum Zinc Oxide
| Product |
Molybdenum Zinc Oxide |
| Colour | N/A |
| Purity | 99% |
| Particle Size | 1-5 µM (Customizable) |
| Ingredient/MF | ZnMoO4 |
| Product Code | NCZ-CP-363/20 |
| CAS Number | 61583-60-6 |
| Density | N/A |
| Melting point | N/A |
| Boiling Point | N/A |
| Molecular Weight | N/A |
| Exact Mass | N/A |
Molybdenum Zinc Oxide Description
Zinc:
Zinc is a Block D, Group 12, Period 4 element with an atomic weight of 65.38. The number of electrons in each of zinc's shells is 2, 8, 18, 2, and its electron configuration is [Ar] 3d10 4s2.
The zinc atom has a radius of 134 pm and a Van der Waals radius of 210 pm. Zinc was discovered by Indian metallurgists prior to 1000 BC and first recognized as a unique element by Rasaratna Samuccaya in 800. Zinc was first isolated by Andreas Marggraf in 1746. In its elemental form, zinc has a silver-gray appearance.
It is brittle at ordinary temperatures but malleable at 100 °C to 150 °C. It is a fair conductor of electricity, and burns in air at high red producing white clouds of the oxide. Zinc is mined from sulfidic ore deposits. It is the 24th most abundant element in the earth's crust and the fourth most common metal in use (after iron, aluminum, and copper).
The name zinc originates from the German word "zin," meaning tin.
Molybdenum:
Molybdenum is a Block D, Group 6, Period 5 element with an atomic weight of 95.96. The number of electrons in each of molybdenum's shells is [2, 8, 18, 13, 1] and its electron configuration is [Kr] 4d5 5s1. The molybdenum atom has a radius of 139 pm and a Van der Waals radius of 209 pm. In its elemental form, molybdenum has a gray metallic appearance. Molybdenum was discovered by Carl Wilhelm in 1778 and first isolated by Peter Jacob Hjelm in 1781. Molybdenum is the 54th most abundant element in the earth's crust.
It has the third highest melting point of any element, exceeded only by tungsten and tantalum. Molybdenum does not occur naturally as a free metal, it is found in various oxidation states in minerals. The primary commercial source of molybdenum is molybdenite, although it is also recovered as a byproduct of copper and tungsten mining. The origin of the name Molybdenum comes from the Greek word molubdos meaning lead.
Related Information
Please email us for the customization.
Email: contact@nanochemazone.com
Please contact us for customization and price inquiry
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Monolayer Molybdenum Diselenide (MoSe2) Quantum Dots
Monolayer Molybdenum Disulfide, MoS2
Monolayer Tungsten Diselenide (WSe2) Quantum Dots
Monolayer Tungsten Disulfide (WS2) Quantum Dots
Monolayer Tungsten Disulfide (WS2) Quantum Dots
| MF: | WS2 |
| Chemical Name: | Tungsten Disulfide |
| Purity: | > 99.99% |
| Size: | ≤ 10 nm (Size Customization possible) |
| Concentration: | 0.5 to 1 mg/ml (Customization possible) |
| Form: | Powder/Dispersion |
| Product Number: | NCZAM110 |
| CAS Number: | 12138-09-9 |
Monolayer Tungsten Disulfide (WS2) Quantum Dots
Monolayer Tungsten Disulfide Powder, WS2
Montmorillonite
Montmorillonite
Product Name: Montmorillonite (Purity: 99.9%, APS: < 80nm)
| Product |
Montmorillonite |
| Cat No | NCZ-MN-138/20 |
| CAS No | 1332-58-7 |
| Purity | 99.9% |
| APS | < 80nm |
| Form | Powder |
| Color | Light cream/off white |
| Density | 1.77g/cm3 |
| pH | 6-9 |
| Hardness | 83 |
| Tensile | 101MPa |
| Moisture Content | < 2% |
| Modulus of elasticity | 4.6GPA |
| Flexural Modulus | 3.78GPa |
| Surface modifier | Quaternary ammonium |
| Molecular Formula | (Na, Ca)0.33 (Al Mg)2 (Si4O10) (OH)2 nH2O |
Related Information
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Montmorillonite 15A Nanoparticles
Montmorillonite Nanoparticles
Product Name: Montmorillonite Nanoparticles (Purity: 99%, APS: 80 nm)
| Product |
Montmorillonite Nanoparticles |
| Cat No | NCZ-MN-130/20 |
| Purity | 99.9% |
| APS | 80 nm |
| Form | Powder |
| Color | Off-White |
| Density | 1.98g/cm3 |
| Moisture | < 3% |
Related Information
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Montmorillonite Bentonite Clay
Montmorillonite Bentonite
Product Name: Montmorillonite Bentonite
| Product |
Montmorillonite Bentonite |
| Cat No | NCZ-MN-131/20 |
| CAS No | 1332-58-7 |
| Purity | 99.9 % |
| APS | ~1nm |
| Form | Powder |
| Color | Light cream/Yellowish |
| Uncompacted Density | 47.5 lbs./cu.ft. |
| Compacted Bulk Density | 37 to 56 lbs./ft3 |
| Specific Gravity | 2.6 |
| Surface Area | 0.09 to1.8 m2/cc |
| Loss on drying | 0.5% |
| pH | 8.5 to 10.5 |
| Solubility | Soluble in water |
| Molecular Formula | MgNaAl5 (Si4O10)3(OH)6 or Al2H2O12Si4 |
Related Information
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Montmorillonite Cation
Montmorillonite Cation
Product Name: Montmorillonite Cation
(MMT-(C16H33) N (CH3)3, Purity: >99.9%, APS: < 80 nm)
| Product | Montmorillonite Cation |
| Cat No | NCZ-MN-132/20 |
| CAS No | N/A |
| Purity | 99.9% |
| APS | < 80nm |
| Molecular Formula | MMT-(C16H33) N (CH3)3 |
| Form | Powder |
| Color | Beige-Tan |
| Density | 1.7-2.7g/cm³ |
| Hardness | 1-2 |
| Solubility | Insoluble in Water |
| Application | As a catalyst in the dimerization of fatty acids |
Related Information
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Montmorillonite Powder
Montmorillonite Powder
Product Name: Montmorillonite (Purity: 99.9%)
| Product |
Montmorillonite powder |
| Cat No | NCZ-MN-134/20 |
| CAS No | 1318-93-0 |
| Purity | 99.9% |
| Form | Powder |
| Color | White |
| Surface Area | 220-270 m²/g |
| Density | 2.3~2.5g/cm³ |
| pH | 3-4 |
| Formula | Mx(Al2−xMgx)(Si4)O10(OH)2·nH2O |
Related Information
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Mullite Nanoparticles
Mullite Nanoparticles
Product Name: Mullite Nanoparticles (Purity: >99.9%, APS: < 50 nm)
| Product |
Mullite Nanoparticles |
| Cat No | NCZ-MN-136/20 |
| CAS No | 1302-93-8 |
| Purity | > 99.9% |
| APS | < 50nm |
| Density | 3.16 g/cm³ |
| pH | 6.5 ～6.8 |
| Standard Plate Count | ≤200 cfu/g |
| Yeast and Mould Count | ≤100 cfu/g |
| Silver coating | 2-3Wt% |
| Acid insoluble substance | ≤0.1% |
Related Information
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Multi Layer Niobium Carbide Mxene Powder
Product Name: Multi Layer Niobium Carbide Mxene Powder
| Product | Multi Layer Niobium Carbide Mxene Powder |
| CAS No. | N.A. |
| Appearance | Powder |
| Purity | 99.9% |
| APS | 1 – 5 microns (can be customized) |
| Ingredient | Nb2C |
| Product Code | NCZ-AE-222 |
DESCRIPTION
Max phase ceramics (including Ti3SiC2, Ti3AlC2, etc.) is a new type of Machinable conductive ceramic material that has attracted much attention. These ceramics contain more than 60 kinds of ternary carbides or nitrides. M represents the front metal elements of the transition group; a represents the main group elements, mainly the elements of the third and fourth main groups; X represents carbon or nitrogen elements. Among them, Ti3SiC2 is the most widely studied. Ti3SiC2 was successfully synthesized by barsoum m, Professor of Drexel University in 1996, and its excellent properties were found. Due to the unique nano layered crystal structure, this kind of ceramic material has the properties of oxidation resistance, self lubrication, high room temperature fracture toughness and conductivity. This kind of materials can be widely used as high temperature structural materials, electrode brush materials, chemical anti-corrosion materials and high temperature heaters Products are mainly used in high temperature coating, mxene precursor, conductive self-lubricating ceramics, lithium-ion batteries, super capacitors, electrochemical catalysis.
RELATED INFORMATION
Storage Conditions:
Airtight sealed, avoid light, and keep dry at room temperature.
Please email us for the customization.
Email: contact@nanochemazone.com
Multi Walled Carbon Nanotubes Powder
Product Name: Multi Walled Carbon Nanotubes Powder
| Product | Multi Walled Carbon Nanotubes Powder |
| CAS No. | 7440-44-0 |
| Appearance | Powder |
| Purity | 99.9% |
| APS | 1 – 5 microns (can be customized) |
| Ingredient | C |
| Product Code | NCZ-AE-177 |
APPLICATION：
Additives in polymers / Catalysts / Electron field emitters for cathode ray lighting elements
Flat panel display / Gas-discharge tubes in telecom networks
Electromagnetic-wave absorption and shielding / Energy conversion
Lithium-battery anodes / Hydrogen storage
Nanotube composites (by filling or coating); / Nanoprobes for STM, AFM, and EFM tips
Nanolithography / Nanoelectrodes / Drug delivery
Sensors / Reinforcements in composites
RELATED INFORMATION
Storage Conditions:
Airtight sealed, avoid light, and keep dry at room temperature.
Please email us for the customization.
Email: contact@nanochemazone.com
Multilayer Graphene
Multilayer Graphene
Product Name: Multilayer Graphene (C, Purity: >99%, D50: 1-5µm, Hydrophobic)
| Product |
Multilayer Graphene |
| Cat No | NCZ-NSC830/20 |
| CAS No | 1034343-98-0 |
| Purity | >99% |
| APS | 1-5µm (Can be customized) |
| Molecular Formula | C |
| Molecular Weight | 12.01g/mol |
| Form | Powder |
| Color | Black |
| Density | 1.9-2.2 g/cm³ |
| Melting Point | 3,452-3,697°C |
| Boiling Point | 4830 °C |
| Solubility | Slightly soluble in water |
Related Information
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Multilayer Perchlor Nb2C Material – MXene
Product Name: Multilayer Perchlor Nb2C Material - MXene
| Product | Multilayer Perchlor Nb2C Material _ MXene |
| CAS No. | 12316-56-2 |
| Appearance | Powder |
| Purity | 99% |
| Size | 1 – 5 microns (can be customized) |
| Ingredient | Nb2C |
| Product Code | NCZ-MX-308 |
Multilayer Perchlor Nb2C Material _ MXene RELATED INFORMATION
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please email us for the customization.
Email: contact@nanochemazone.com
Multilayer perchloro group MXene
Product Name: Multilayer perchloro group MXene
| Product | Multilayer perchloro group MXene |
| Colour | Black Powder |
| Purity | ≥98 wt% |
| Ingredient | V2C, Ti2C, Nb2C, Ti3C2 |
| CAS NO | 12316-56-2 |
APPLICATION FIELDS
High-temperature coating, Mxene precursor, conductive self-lubricating ceramic, lithium-ion battery, supercapacitor, electrochemical catalysis.
RELATED INFORMATION
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please email us for the customization.
Email: contact@nanochemazone.com
MWCNT Dispersion
| MF: | MWCNT |
| Chemical Name: | MWCNT Dispersion |
| Purity: | > 99% |
| Diameter: | 20-30 nm (Size Customization possible) |
| Form: | Dispersion |
| Product Number: | NCZD2101 |
| CAS Number | 308068-56-6 |
Please contact us for customization and price inquiry.
Note: We supply different size products of micro and Nano Size range dispersion according to client’s requirements.
MWCNT-Multi Walled Carbon Nanotubes
MWCNT Multiwalled Carbon Nanotubes
| MF: | C |
| Chemical Name: | Multi Walled Carbon Nanotubes |
| Purity: | > 98% (MWCNT) |
| Length: | 5-30 µm (Customization possible) |
| Diameter: | 20-30 nm (O.D), 2 -5 nm (I.D) (Customization possible) |
| SSA: | >580 m2/g (BET) |
| Ash: | <1.0 wt% |
| Tap density: | 0.27g/cm3 |
| True density: | ~ 2.1g/cm3 |
| Form: | Nanopowder/Nanodispersion |
| Conductivity: | 100 S/cm (Electric); 50-200 W/m.K (Thermal) |
| Color: | Black |
| Product Number: | NCZCNT105 |
| CAS Number: | 308068-56-6 |
Contact us for Customization: sales@nanochemazone.com
MXene conductive flexible printed circuit Inks
MXene Inks
MXene modified conductive flexible printed circuit with high conductivity and good adhesion
Product Code: NCZ-MX-228
| Product | Mxene Inks such as V2C Ink, Ti2C Ink, Ti3C2 Ink, Nb2C Ink |
| Colour | Black Powder/Ink |
| Purity | ≥98 wt% |
| Ingredient | V2C, Ti2C, Ti3C2, Nb2C |
| CAS NO | 12316-56-2 |
APPLICATION FIELDS
High-temperature coating, Mxene precursor, conductive self-lubricating ceramic, lithium-ion battery, supercapacitor, electrochemical catalysis.
Product features:
Good printability, electrical conductivity, high hardness, and strong adhesion. This kind of product has good bending resistance, low modulus, good performance, and excellent solvent resistance. Good adhesion to PET, PI, ITO substrate and FR substrate.
Typical applications: printing of electronic circuits such as membrane switches, keyboards, remote controls, flexible printed circuits, and FPCs. Miniature supercapacitor.
Instructions for use of Mxene Inks:
1. Applicable substrate: PET, PC, ITO, etc.
2. Stir: Stir thoroughly for 5 to 10 minutes before use.
3. Dilute: special diluent, the added proportion should not exceed 3% of the total weight.
4. Recommended process:
Printing thickness: wet film: 20μm; dry film: 4-7μm;
Silk screen: 250-300 mesh polyester or stainless steel screen printing;
Scraper: Polyurethane or solvent resistant material;
Equipment: Semi-automatic printing machine;
Curing conditions: Oven: 130 ℃ × 20 min IR furnace: 135 ℃ × 10 min (can be adjusted according to customer requirements)
Cleaning agent: acetone or diethylene glycol ether acetate.
Due to the significant environmental impact of the process, screen printing is recommended to be divided into batches and used up within 8 hours. Installing a protective cover can reduce the volatilization of product components and cut off dust particles in the air to ensure quality.
RELATED INFORMATION
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please email us for the customization.
Email: contact@nanochemazone.com
MXene Doped Graphene Aerogel
Product Name: MXene Doped Graphene Aerogel
| Product | MXene Doped Graphene Aerogel |
| CAS No. | 12316-56-2 |
| Appearance | Powder |
| Purity | 99% |
| Diameter | 1.2 cm diameter doped graphene Aerogel |
| Ingredient | N.A. |
| Product Code | NCZ-MX-312 |
RELATED INFORMATION
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please email us for the customization.
Email: contact@nanochemazone.com
MXene sticky water-based ink
Product Name: MXene Inks
Product Code: NCZ-MX-227
| Product | Mxene Inks such as V2C Ink, Ti2C Ink, Ti3C2 Ink |
| Colour | Black Powder/Ink |
| Purity | ≥98 wt% |
| Ingredient | V2C, Ti2C, Ti3C2 |
| CAS NO | 12316-56-2 |
APPLICATION FIELDS
High-temperature coating, Mxene precursor, conductive self-lubricating ceramic, lithium-ion battery, supercapacitor, electrochemical catalysis.
RELATED INFORMATION
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please email us for the customization.
Email: contact@nanochemazone.com
MXene Viscous Water-Based Ink
Product Name: MXene Viscous Water-Based Ink
| Product |
MXene Viscous Water-Based Ink |
| CAS No. | 12316-56-2 |
| Appearance | Suspension |
| Purity | 99% |
| Diameter | 5 – 10 nm (can be customized) |
| Ingredient | Ti3C2 composite Si anode Ink |
| Product Code | NCZ-MX-310 |
RELATED INFORMATION
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please email us for the customization.
Email: contact@nanochemazone.com
N Doped Silicon Wafer (4 inch, N Type, Phosphorus Doped)
N Doped Silicon wafers
| Product Name | Phosphorus Doped Silicon Wafer |
| Product Code | NCZ-WM-0014 |
| Diameter | 4″ (101.6mm), also available in 2, 3, 5, 6, 12″ |
| Type | N-Type |
| Doping | Phosphorous, Antimony, etc. (customization possible) |
| Crystal Orientation | <100> /other orientations are also available |
| Surface | Single /Both Side Polished |
| Thickness | 250-500 μm (customization possible) |
| Resistivity | 1-10 ohm-cm |
| Crystal method | CZ |
| RRG | ≤12 % |
| Oxygen Contents | 12.5-16.5 ppm |
| Carbon Contents | ≤1 ppm |
Please enquire for other wafers having different thicknesses, Diameter, Length, and sizes, etc.
If the item is shown is not exactly what you require please let us know by sending us a message
Nano Boehmite Powder
Nano Boehmite Powder
Product Name: Nano Boehmite Powder
| Product | Nano Boehmite Powder |
| Colour | White |
| Purity | ≥ 99.9% |
| Particle size | 1-10 µM (customizable) |
| Ingredient/MF | AlOOH |
| Product Code | NCZ-CM-174/20 |
| CAS Number | 1344-28-1 |
Nano Boehmite PowderApplication:
(1) Electronic Substrates: Improve heat resistance, improve yield, and significantly increase flame retardancy of materials
(2) Silicone Rubber and Electronic Potting Sealant: Improve heat resistance, improve dielectric and thermal conductivity, and significantly improve the flame-retardant properties of materials
(3) Coatings: plate-like crystal particles, preventing fluid intrusion, preventing gas transmission, improving moisture resistance, water resistance, superior aging resistance, and significantly improving flame retardant performance
(4) Rubber and plastic fillers: Due to the fine plate-like crystal particles, the tensile strength, tensile strength, and tensile stress are enhanced, and the flame-retardant performance is significantly improved.
Please email us for the customization.
Email: contact@nanochemazone.com
Please contact us for customization and price inquiry
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Nano Grained TUNGSTEN CARBIDE COBALT WC CO
Nano Grained TUNGSTEN CARBIDE COBALT WC CO
Product Name: Nano Grained TUNGSTEN CARBIDE COBALT WC CO
| Product | Nano Grained Tungsten Carbide Cobalt WC Co |
| Cat No | NCZ-MN-097/20 |
| CAS No | 12774-15-1 |
| APS | 40-80nm (Can be customized ) |
| Purity | >99.9 % |
| Molecular Formula | WC/Co |
| Molecular Weight | 254.78g/mol |
| Form | Powder |
| Color | Black/Gray |
| Melting Point | 2867°C |
| Boiling Point | 6000°C |
Please email us for the customization.
Email: contact@nanochemazone.com
Please contact us for customization and price inquiry
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Nano Nickel Zinc Ferrite Powder
Nano Nickel Zinc Ferrite Powder
Product Name: Nano Nickel Zinc Ferrite Powder (Ni0.5Zn0.5Fe2O4, Purity: >99.9%, APS: < 30 nm)
| Product | Nickel Zinc Ferrite Powder |
| Cat No. | NCZ-MN-098/20 |
| CAS | 12645-50-0 |
| APS | < 30 nm |
| Purity | >99.9% |
| Molecular Formula | Ni0.5Zn0.5Fe2O4 |
| Molecular Weight | 411.46 g/mol |
| Form | Powder |
| Color | Dark Brown |
| Density | 2.81 g/cm³ |
| Bulk Density | ~0.80 g/cm³ |
| Coercivity | 53Oe |
| Solubility | Insoluble in water |
Please email us for the customization.
Email: contact@nanochemazone.com
Please contact us for customization and price inquiry
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Nano Red Iron Oxide Powder
Product Name: Nano Red Iron Oxide Powder
| Product | Nano Red Iron Oxide Powder |
| CAS No. | 1309-37-1 |
| Appearance | Powder |
| Purity | 99.9% |
| APS | 1 – 5 Microns (Can be customized) |
| Ingredient | Fe2O3 |
| Product Code | NCZ-AE-115 |
RELATED INFORMATION
Storage Conditions:
Airtight sealed, avoid light, and keep dry at room temperature.
Please email us for the customization.
Email: contact@nanochemazone.com
Nano Size Monolayer Tungsten Disulfide, WS2
Nano Tungsten Wolfram Powder
Product Name: Nano Tungsten Wolfram Powder
| Product | Nano Tungsten Wolfram Powder |
| Colour | Black |
| Purity | ≥ 99.99% |
| Particle size | 1-10 µM (customizable) |
| Ingredient/MF | W |
| Product Code | NCZ-CE-170/20 |
| CAS Number | 7440-33-7 |
Application of Tungsten wolfram powder
- A large number of large products such as high specific gravity alloy, green bullet, alloy steel, drill bit and top hammer.
- Highly active nano tungsten powder can be used as an additive for raw material powder of high performance high specific gravity alloy.
- The nano tungsten powder can be used as a raw material of nano WC to prepare nanocrystalline cemented carbide.
Please email us for the customization.
Email: contact@nanochemazone.com
Please contact us for customization and price inquiry
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Nanoclay Modified Asphalt Material
Nanoclay Modified Asphalt Materials
Product Name: Nanoclay Modified Asphalt Materials (Al2 [(OH) 2|Si4O10].nH2O, >99.9%, < 80nm)
| Product |
Nanoclay Modified Asphalt Materials |
| Cat No | NCZ-MN-137/20 |
| CAS | 1332-58-7 |
| Purity | >99.9% |
| APS | < 80nm |
| Appearance | Black thick paste like mastic |
| Specific Gravity | 1.01-1.05 |
| Odor | Mild hydrocarbon odor |
| Density | > 8.4 (lb./gal) |
| Melting Point | 110-120 °F |
| Boiling Point | >500 °C |
| Vapor density | >1 (Air=1) |
| Vapor Pressure | < 0.1 psi (Reid) |
| Viscosity | 139‐3000cP at 135°C |
| Solubility | < 0.5% |
Related Information
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Nanoclay Powder
Nanoclay Powder
Product Name: Nanoclay Powder (Purity: > 99.9%, APS: 80-100 nm)
| Product |
Nanoclay Powder |
| Cat No | NCZ-MN-139/20 |
| CAS No | 1332-58-7 |
| Purity | > 99.9% |
| APS | 80-100 nm |
| Molecular Formula | H2Al2O8Si2.H2O |
| Molecular Weight | 258.16 g/mol |
| Crystal System | Monoclinic |
| Color | White Cream Powder |
| Density | 2.6 g/cm³ |
| Melting Point | 1750°C |
| pH | 6-7 |
| MOHS Hardness | 2.5 at 20 °C |
| Water Absorption | 250-650 % by weight |
Nanoclay Related Information
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Nanoporous Iron Metal Organic Frameworks (MIL-89)
| Product Name |
Nanoporous Iron Metal-Organic Frameworks |
| Stock No. | NCZMOF106 |
| CAS | 7439-89-6 |
| Purity | 99% |
| APS | 30-40 µm |
| Molecular Formula | C8H12N4Zn |
| Molecular Weight | 229.60g/ mol |
| Odour | Odorless |
| Color | White |
| Density | 0.35 g/ cm3 |
| Pore Size | ~10Å |
| SSA | ~1300 m2/g (BET) |
| Solubility | Ethanol |
| Application | Gas separations: Paraffin isomers, alkanes, Gas adsorption |
| Linker | HMIM, 2-MIM (2-methylimidazole) |
Please contact us for customization and price inquiry.
Note: We supply different size products of micro and Nano Size range powder according to client’s requirements.
Nanosize Monolayer Molybdenum Disulfide, MoS2
Nanostructured Carbon Screen Printed Electrodes
| Product Name | Orion Screen Printed Electrodes |
| Product Code | NCZSPE105-19 |
| Diameter of WE | 2 mm, 3 mm, 4 mm , 5 mm |
| Size of RE | 0.5 x 1 mm |
| Ratio CE/WE Surface Area | 4/1 |
| Shape | Rectangle |
| Overall Dimension | 50 x 10mm |
| Thickness | 0.5mm |
| Thickness of Coated Material | 10 µm |
| Working Electrode | Graphite, Gold, Graphene, CNT, Platinum, Silver (customization possible) |
| Counter Electrode | Graphite, Gold, Silver |
| Reference Electrode | Ag/AgCl |
| Substrate | Valox FR1 |
| Packaging | 50, 100, 200, 500, 1000 Pcs |
Natural Graphite Flaky Powder
Product Name: Natural Graphite Flaky Powder
| Product | Natural Graphite Flaky Powder |
| CAS No | 7782-42-5 |
| Appearance | Black Powder |
| Purity | 99.9% |
| APS | 3um, 5um, 10um, 30um (Can be customized) |
| Product Code | NCZ-NSC338/20 |
| Modulus of Elasticity (GPa) | 8-15 |
| Compressive strength (MPa) | 20-200 |
Description of Super Adsorption Activated Porous Carbon Powder
Solid carbon comes in different forms known as allotropes depending on the type of chemical bond. The two most common are diamond and graphite less common ones include buckminsterfullerene. In diamond the bonds are sp3 and the atoms form tetrahedra with each bound to four nearest neighbors.
In graphite, they are sp2 orbital hybrids and the atoms form in planes with each bound to three nearest neighbors 120 degrees apart.
The individual layers are called graphene. In each layer, the carbon atoms are arranged in a honeycomb lattice with a separation of 0.142 nm, and the distance between planes is 0.335 nm. Atoms in the plane are bonded covalently, with only three of the four potential bonding sites satisfied. The fourth electron is free to migrate in the plane, making graphite electrically conductive. Bonding between layers is via weak van der Waals bonds, which allows layers of graphite to be easily separated, or to slide past each other. Electrical conductivity perpendicular to the layers is consequently about 1000 times lower.
The two known forms of graphite, alpha (hexagonal) and beta (rhombohedral) have very similar physical properties, except that the graphene layers stack slightly differently. The alpha graphite may be either flat or buckled. The alpha form can be converted to the beta form through mechanical treatment and the beta form reverts to the alpha form when it is heated above 1300 °C.
Related Information of Natural Graphite Flaky Powder
Storage Conditions:
Airtight sealed, avoid light, and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
NaY Nanopowder
Product Name: NaY Nanopowder
| Product | NaY Nanopowder |
| CAS No. | 1318-02-1 |
| Appearance | Powder |
| Purity | 99.9% |
| APS | 1 – 5 microns (can be customized) |
| Ingredient | NaY |
| Product Code | NCZ-AE-196 |
DESCRIPTION
NaY molecular sieve is a sodium molecular sieve with a Y-type crystal structure. It is an alkali metal aluminosilicate. NaY molecular sieve has a three-dimensional structure composed of Si and Al tetrahedral structural units, and can adsorb molecules with a critical diameter of not more than 10Å.
Main uses:
1) catalyst and catalyst carrier;
2) adsorbent.
RELATED INFORMATION
Storage Conditions:
Airtight sealed, avoid light, and keep dry at room temperature.
Please email us for the customization.
Email: contact@nanochemazone.com
Nb2AlC MAXene Powder
Product Name: Nb2AlC MAXene Powder
| Product |
Nb2AlC MAXene Powder |
| Colour | Black Powder |
| Purity | ≥98 wt% |
| Ingredient | Nb2AlC |
| Product Code | NCZ-MX-118 |
APPLICATION FIELDS
High-temperature coating, MXene precursor, conductive self-lubricating ceramic, lithium-ion battery, supercapacitor, electrochemical catalysis.
RELATED INFORMATION
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please email us for the customization.
Email: contact@nanochemazone.com
Nb2CTx MXene Multilayer Nanoflake
Nb2CTx (MXene) Multilayer Nanoflake
Product Code: NCZ-MX-102
| Product | Nb2C (MXene) Multilayer Nanoflakes |
| Colour | Black powder |
| Purity | ~ 99% |
| MF | Nb2C |
| Size | 50-150 nm |
| CAS No. | 12011-99-3 |
APPLICATION FIELDS
Nb2CTx MXene Multilayer Nanoflake Powder
Nb2C MXenes and MXenes-based nanocomposites have been widely used in nano-adsorption, biosensors, ion sieving, catalysis, lithium-ion batteries, supercapacitors, lubrication, and many other fields.
Nb2C (MXene) Multilayer Nanoflakes RELATED INFORMATION
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please email us for the customization.
Email: contact@nanochemazone.com
Nb4AlC3 MAXene Powder
Product Name: Nb4AlC3 MAXene Powder
| Product | Nb4AlC3 MAXene |
| Colour | Black Powder |
| Purity | ≥98 wt% |
| Ingredient | Nb4AlC3 |
| Product Code | NCZ-MX-117 |
Nb4AlC3 MAXene APPLICATION FIELDS
High-temperature coating, MXene precursor, conductive self-lubricating ceramic, lithium-ion battery, supercapacitor, electrochemical catalysis.
RELATED INFORMATION
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please email us for the customization.
Email: contact@nanochemazone.com
Nb4C3 MXenes Powder
Product Name: Nb4C3 MXenes Powder
Product Code: NCZ-MX-211
| Product | Nb4C3 MXene |
| Colour | Black Powder |
| Purity | ≥98 wt% |
| Ingredient | Nb4C3 |
| CAS NO | 12316-56-2 |
Nb4C3 MXenes Powder APPLICATION FIELDS
High-temperature coating, Mxene precursor, conductive self-lubricating ceramic, lithium-ion battery, supercapacitor, electrochemical catalysis.
RELATED INFORMATION
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please email us for the customization.
Email: contact@nanochemazone.com
Neodymium (Nd) Micron Powder
Neodymium (Nd) Micron Powder, Purity: 99.5 %, Size: 325 mesh
Neodymium (Nd) Micron Powder
Purity: 99.5 %, Size: 325 mesh
Neodymium Powder Technical Properties:
| Product Number | NCZ-RE-108-19 |
| PURITY | 99.5 % |
| PARTICLE SIZE | 325 mesh (Customizable) |
| MELTING POINT | 1021 °C |
| BOILING POINT | 3068 °C |
| DENSITY | 6.80-7.007 g/cc |
| FORM | Powder |
| ELECTRIC RESISTIVITY | 64.0 micro ohm-cm @ 25 °C |
Neodymium (Nd) Micron Powder Note: Nanohemazone manufacture and supply different particle sizes of Neodymium Powder (Nano size range, Micron, Submicron, and different Mesh size) products of Alloy powders (Multi-Element, Multi-Element Oxide and Mixture of Rare Earth Elements) according to client’s requirements. Kindly ask for the customization in size and Element ratio composition.
Neodymium Barium Copper Oxide
Neodymium Barium Copper Oxide
| Product |
Neodymium Barium Copper Oxide |
| Colour | N/A |
| Purity | 99% |
| Particle Size | 1-5 µM (Customizable) |
| Ingredient/MF | NdBa2Cu3O7 |
| Product Code | NCZ-CP-366/20 |
| CAS Number | 111419-84-2 |
| Density | 6.73 g/cm3 (lit.) |
| Melting point | N/A |
| Boiling Point | N/A |
| Molecular Weight | N/A |
| Exact Mass | N/A |
Neodymium Barium Copper Oxide Description
Barium is a Block S, Group 2, Period 6 element with an atomic weight of 137.27. The number of electrons in each of barium's shells is [2, 8, 18, 18, 8, 2] and its electron configuration is [Xe] 6s2. Barium is a member of the alkaline-earth metals. The barium atom has a radius of 222 pm and a Van der Waals radius of 268 pm. Barium was discovered by Carl Wilhelm Scheele in 1772 and first isolated by Humphry Davy in 1808. In its elemental form, barium is a soft, silvery-gray metal. Industrial applications for barium include acting as a "getterer," or unwanted gas remover, for vacuum tubes, and as an additive to steel and cast iron. Barium is also alloyed with silicon and aluminum as load-bearing alloys. The main commercial source of barium is the mineral barite (BaSO4) it does not occur naturally as a free element . The name barium is derived from the Greek word "barys," meaning heavy. Copper is a Block D, Group 11, Period 4 element with an atomic weight of 63.546. The number of electrons in each of copper's shells is 2, 8, 18, 1 and its electron configuration is [Ar] 3d10 4s1. The copper atom has a radius of 128 pm and a Van der Waals radius of 186 pm. Copper was first discovered by Early Man prior to 9000 BC. In its elemental form, copper has a red-orange metallic luster appearance. Of all pure metals, only silver has a higher electrical conductivity.
The origin of the word copper comes from the Latin word 'cuprium' which translates as "metal of Cyprus." Cyprus, a Mediterranean island, was known as an ancient source of mined copper. Neodymium is a Block F, Group 3, Period 6 element with an atomic weight of 144.242. The number of electrons in each of Neodymium's shells is 2, 8, 18, 22, 8, 2 and its electron configuration is [Xe] 4f4 6s2. The neodymium atom has a radius of 181 pm and a Van der Waals radius of 229 pm. Neodymium was first discovered by Carl Aer von Welsbach in 1885. In its elemental form, neodymium has a silvery-white appearance. Neodymium is the most abundant of the rare earths after cerium and lanthanum. Neodymium is found in monazite and bastnäsite ores. It is used to make high-strength neodymium magnets and laser crystal substances like neodymium-doped yttrium aluminum garnet (also known as Nd:YAG). The name originates from the Greek words neos didymos, meaning new twin.
Related Information
Please email us for the customization.
Email: contact@nanochemazone.com
Please contact us for customization and price inquiry
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Neodymium Chloride Powder
Neodymium Chloride Powder
| Product |
Neodymium Chloride Powder |
| CAS No. | 10024-93-8 |
| Appearance | Powder |
| Purity | 99% |
| APS | 1-5 µM (Can be customized) |
| Ingredient | NdCl |
| Product Code | NCZ-AP-10030/20 |
| Molecular Weight | N/A |
| Density | N/A |
| Melting Point | N/A |
Neodymium Chloride Description
Neodymium Chloride mainly used for glass, crystal and capacitors. Colours glass delicate shades ranging from pure violet through wine-red and warm gray. Light transmitted through such glass shows unusually sharp absorption bands. It is useful in protective lenses for welding goggles. It is also used in CRT displays to enhance contrast between reds and greens. It is highly valued in glass manufacturing for its attractive purple coloring to glass.
Related Information
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Neodymium Fluoride
Neodymium Fluoride
| Product |
Neodymium Fluoride |
| CAS No. | 13709-42-7 |
| Appearance | White |
| Purity | 99% |
| APS | 1-5µM (Can be customized) |
| Ingredient | NdF3 |
| Product Code | NCZ-NSC578/20 |
| Molecular Weight | 201.24 g/mol |
| Density | 6.65 g/cm³ at 25ºC |
| Melting Point | 1,410ºC (2,570°F) |
Neodymium Fluoride Description
Neodymium Fluoride is a water insoluble neodymium source for use in oxygen-sensitive applications, such as metal production. Fluoride compounds have diverse applications in current technologies and science, from oil refining and etching to synthetic organic chemistry and the manufacture of pharmaceuticals. Fluorides are also commonly used to alloy metals and for optical deposition. NdF is generally immediately available in most volumes. Ultra high purity, high purity, submicron and nanopowder forms may be considered.
Primary applications include lasers, glass coloring and tinting, and dielectrics. Nanochemazone produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available.
Additional technical, research and safety (MSDS) information is available as is a Reference Calculator for converting relevant units of measurement.
Related Information
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Neodymium Fluoride Powder
Neodymium Fluoride
| Product |
Neodymium Fluoride |
| CAS No. | 13709-42-7 |
| Appearance | White |
| Purity | 99% |
| APS | 1-5 µM (Can be customized) |
| Ingredient | NdF3 |
| Product Code | NCZ-NSC551/20 |
| Molecular Weight | 62.3 g/mol |
| Density | 6.65 g/cm³ at 25ºC |
| Melting Point | 1,410ºC (2,570°F) |
| Refractive Index | 1.62 at 500nm |
| Transmission Range | 170nm - 14µnm |
| Temperature | 1200 - 1,600ºC |
Neodymium Fluoride Description
Neodymium Fluoride is a water insoluble Magnesium source for use in oxygen-sensitive applications, such as metal production. Fluoride compounds have diverse applications in current technologies and science, from oil refining and etching to synthetic organic chemistry and the manufacture of pharmaceuticals. Fluorides are also commonly used to alloy metals and for optical deposition.
Neodymium Fluoride is generally immediately available in most volumes. Ultra high purity, high purity, submicron and nanopowder forms may be considered. Nanochemazone produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards.
Typical and custom packaging is available. Additional technical, research and safety (MSDS) information is available as is a Reference Calculator for converting relevant units of measurement.
Neodymium Fluoride Related Information
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Neodymium Gallium Oxide
Neodymium Gallium Oxide
| Product |
Neodymium Gallium Oxide |
| Colour | Light blue powder |
| Purity | 99% |
| Particle Size | 1-5 µM (customizable) |
| Ingredient/MF | GaNdO3 |
| Product Code | NCZ-CP-367/20 |
| CAS Number | 12207-22-6 |
| Density | N/A |
| Melting point | 1800°C |
| Boiling Point | N/A |
| Molecular Weight | 261.96 |
| Exact Mass | 258.818041 |
Neodymium Gallium Oxide Description
Gallium is a Block P, Group 13, Period 4 element with an atomic weight of 69.723.The number of electrons in each of Gallium's shells is 2, 8, 18, 3 and its electron configuration is [Ar] 3d10 4s2 4p1. The gallium atom has a radius of 122.1 pm and a Van der Waals radius of 187 pm. Gallium was predicted by Dmitri Mendeleev in 1871. It was first discovered and isolated by Lecoq de Boisbaudran in 1875. In its elemental form, gallium has a silvery appearance. Gallium is one of three elements that occur naturally as a liquid at room temperature, the other two being mercury and cesium. Gallium does not exist as a free element in nature and is sourced commercially from bauxite and sphalerite. Currently, gallium is used in semiconductor devices for microelectronics and optics. The element name originates from the Latin word 'Gallia', the old name of France, and the word 'Gallus,' meaning rooster.
Neodymium:
Neodymium is a Block F, Group 3, Period 6 element with an atomic weight of 144.242. The number of electrons in each of Neodymium's shells is 2, 8, 18, 22, 8, 2 and its electron configuration is [Xe] 4f4 6s2. The neodymium atom has a radius of 181 pm and a Van der Waals radius of 229 pm. Neodymium was first discovered by Carl Aer von Welsbach in 1885. In its elemental form, neodymium has a silvery-white appearance. Neodymium is the most abundant of the rare earths after cerium and lanthanum. Neodymium is found in monazite and bastnäsite ores. It is used to make high-strength neodymium magnets and laser crystal substances like neodymium-doped yttrium aluminum garnet (also known as Nd:YAG). The name originates from the Greek words neos didymos, meaning new twin.
Related Information
Please email us for the customization.
Email: contact@nanochemazone.com
Please contact us for customization and price inquiry
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Neodymium Iron Boron Magnetic Powder (NdFeB)
Neodymium Iron Boron Magnetic Powders (NdFeB, Isotropic, Purity: 99.9%, APS: 1-20 µm)
Neodymium Iron Boron Powder
| MF: | NdFeB |
| Chemical Name: |
Neodymium Iron Boron Powder |
| Purity: | > 99.9% |
| APS: | 1 Micron, 5 Micron, 10-20 micron, 38 Micron, 325 Mesh, 200 Mesh, 150 Mesh, 100 Mesh, 40 Mesh (Size Customization possible) |
| Form: | Micron size powder |
| Product Number: | NCZM-125-19 |
| CAS Number: | 918106-59-9 |
NdFeB Powder
Note: We can supply different size NdFeB of micro and Nano Size range powder according to the client's requirements.
Neodymium Iron Boron Nanoparticles (NdFeB Nanopowder)
Neodymium boron ferrite nanoparticles
High-Quality Neodymium Iron Boron Nanoparticles (NdFeB) nanoparticles & nanopowder
Neodymium Iron Boron on Low Price
| MF: | NdFeB |
| Chemical Name: | Neodymium Iron Boron Nanoparticles (NdFeB) |
| Purity: | > 99% |
| APS: | <100 nm (Size Customization possible) |
| Form: | Nanopowder |
| Product Number: | NCZA125 |
| CAS Number: | 918106-59-9 |
NdFeB Powder
Note: We can supply different size NdFeB of micro and Nano Size range powder according to the client's requirements.
Neodymium Nitrate Hexahydrate
Neodymium Nitrate Hexahydrate
Product Name: Neodymium Nitrate Hexahydrate
| Product | Nitrate hexahydrate |
| CAS No. | 16454-60-7 |
| Appearance | Purple Powder |
| Purity | 99.9% |
| APS | 1 – 5 Microns (Can be customized) |
| Ingredient | Nd(NO3)3•6H2O |
| Product Code | NCZ-NSC-304/20 |
Description of Neodymium Nitrate :
Neodymium nitrate hexahydrate is used to prepare nanoparticles of neodymium oxybromide and neodymium oxide. It is also used in coloring glasses and for doping some glass lasers.
Related Information of Neodymium Nitrate Hexahydrate
Storage Conditions:
Airtight sealed, avoid light, and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Neodymium Nitrate Hydrate Powder
Product Name: Neodymium Nitrate Hydrate Powder
| Product | Nitrate Hydrate |
| CAS No. | 13746-96-8 |
| Appearance | Purple Powder |
| Purity | 99.9% |
| APS | 1 – 5 Microns (Can be customized) |
| Ingredient | Nd(NO3)3•xH2O |
| Product Code | NCZ-NSC-305/20 |
Description of Neodymium Nitrate Hydrate Powder:
It is used as pharmaceutical intermediates. It is used in the selective PVC membrane sensors. The sensor with ionophore (L1) exhibits significantly enhanced selectivity towards neodymium.
Related information Neodymium Nitrate Hydrate Powder
Storage Conditions:
Airtight sealed, avoid light, and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Neodymium Oxide (Nd2O3) Micron Powder
Neodymium Oxide (Nd2O3) Micron Powder, Purity: 99.99%, Size: 325 mesh
Neodymium Oxide (Nd2O3) Micron Powder
Purity: 99.99 %, Size: 325 mesh
Technical Properties:
| Product Number | NCZ-RE-123-19 |
| PURITY | 99.99 % |
| COLOR | Light Blue |
| SIZE | 325 Mesh |
Note: We can manufacture and supply different particle sizes (Nano size range, Micron, Submicron, and different Mesh size) products of Alloy powders (Multi-Element, Multi-Element Oxide and Mixture of Rare Earth Elements) according to client’s requirements. Kindly ask for the customization in size and Element ratio composition.
Neodymium Oxide (Nd2O3) Nanopowder/Nanoparticles
Neodymium Oxide (Nd2O3) Nanopowder/Nanoparticles, Purity: 99.95%, Size: 25-40 nm
Neodymium Oxide (Nd2O3) Nanopowder/Nanoparticles
Purity: 99.95 %, Size: 25-40 nm
Technical Properties:
| Product Number | NCZ-RE-123A-19 |
| PURITY | 99.95 % |
| COLOR | Pale Voilet |
| AVERAGE PARTICLE SIZE | 25-40 nm |
| SPECIFIC SURFACE AREA (m2/g) | >45 |
| BULK DENSITY (g/cm3) | 0,2 |
| TRUE DENSITY (g/cm3) | 7,2 |
| ELEMENT ANALYSIS (%) | |
| Fe2O3 | 0.005 |
| CaO | 0.005 |
| SiO2 | 0.01 |
Note: We can manufacture and supply different particle sizes (Nano size range, Micron, Submicron, and different Mesh size) products of Alloy powders (Multi-Element, Multi-Element Oxide and Mixture of Rare Earth Elements) according to client’s requirements. Kindly ask for the customization in size and Element ratio composition.
Neodymium Oxide Nanoparticles
Neodymium Oxide Nanoparticles
Neodymium Oxide Nanopowder
Nano Neodymium Oxide
| MF: | Nd2O3 |
| Chemical Name: | Neodymium Oxide |
| Purity: | > 99.99% |
| APS: | 20 nm (Size Customization possible) |
| Form: | Nanopowder |
| Product Number: | #NCZ4501 |
| CAS Number | 1313-97-9 |
Note: We supply different products of microparticles and Nanoparticles powder in all size range according to client’s requirements.
Neodymium Oxide Powder
Product Name: Neodymium Oxide Powder
| Product | Neodymium Oxide Powder |
| CAS No. | 1313-97-9 |
| Appearance | Powder |
| Purity | 99.9% |
| APS | 1 – 5 microns (can be customized) |
| Ingredient | Nd2O3 |
| Product Code | NCZ-AE-261 |
RELATED INFORMATION
Storage Conditions:
Airtight sealed, avoid light, and keep dry at room temperature.
Please email us for the customization.
Email: contact@nanochemazone.com
Neodymium Oxide Powder
Neodymium Oxide Powder
Product Name: Neodymium Oxide Powder
| Product | Neodymium Oxide Powder |
| Colour | Purple |
| Purity | ≥ 99.9% |
| Particle size | 1-10 µM (customizable) |
| Ingredient/MF | Nd2O3 |
| Product Code | NCZ-CR-130/20 |
| CAS Number | 1313-97-9 |
Neodymium Oxide Powder Description:
Neodymium (III) oxide or neodymium oxide is the chemical compound composed of neodymium and oxygen with the formula Nd2O3.
It forms very light greyish-blue hexagonal crystals.
The rare-earth mixture didymium, previously believed to be an element, partially consists of neodymium (III) oxide.
Neodymium Oxide Powder Application:
- Mainly for production of metal Nd, magnetic materials of Nd-Fe-B, Nd doped Y-Al garnet for laser technology and additives for glass ceramic.
- Used as a polymerization catalyst.
- Used for glass and capacitors
Neodymium Oxide Powder Properties:
1.Insoluble in water, moderately soluble in strong mineral acids.
2.Slightly hygroscopic.
- Chromium metal is also a fundamental ingredient in various types of super alloys which are essential to the aerospace and nuclear power industries
4.Chromium plating and permeability can make steel and copper, Aluminum and other metal forming corrosion resistant surface, and bright beautiful, used in large furniture, automobile, building industry, etc
- Heavy chromate salt used for leather tanning, dyeing fabrics of impregnant, mordant and all kinds of pigment.
Please email us for the customization.
Email: contact@nanochemazone.com
Please contact us for customization and price inquiry
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Nickel Aluminide Powder
Nickel Aluminide Powder
Product Name: Nickel Aluminide Powder
| Product | Nickel Aluminide |
| CAS No. | 12003-78-0 |
| Appearance | White Powder |
| Purity | 99.9% |
| APS | 1 – 5 Microns (Can be customized) |
| Ingredient | NiAl |
| Product Code | NCZ-NSC-287/20 |
Description of Nickel Aluminide Powder:
Nickel aluminide is an intermetallic alloy of nickel and aluminum with properties similar to both ceramic and metal. Store in a cool place. Keep container tightly closed in a dry and well-ventilated place.
Related Information of Nickel Aluminide Powder
Storage Conditions:
Airtight sealed, avoid light, and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters
Nickel based Metal Organic Framework
| Product Name |
Nickel based Metal Organic Framework |
| Stock No. | NCZMOF122 |
| CAS | 7440-02-0 |
| Purity | 99% |
| APS | 30-40 µm |
| Molecular Formula | C18H6Ni3O12 |
| Molecular Weight | 229.60g/ mol |
| Odour | Odorless |
| Color | White |
| Density | 0.35g/ cm3 |
| Pore Size | ~10Å |
| SSA | ~1300 m2/g (BET) |
| Solubility | Ethanol |
| Application | Gas adsorption: Methane gas |
| Linker | H4DOBDC (2,5-dihydroxyterephthalic acid) |
Please contact us for customization and price inquiry.
Note: We supply different size products of micro and Nano Size range powder according to client’s requirements.
Nickel Chromium Alloy Nanopowder
Ni-Cr Alloy Nanoparticles/Nanopowder (Particle Size Less than ≤ 80 nm, 99.9%)
Nickel Chromium Alloy Nanopowder
| Product Formula | Ni: Cr |
| Product Number | NCZ-A-118-19 |
| CAS Number | 7440-02-0/7440-47-3 |
| Molecular Weight | 110.68 g/moL |
| APS | ≤ 80 nm (can be customized) |
| Purity | 99.9% |
| Color | Grayish Black |
| Form | Nanopowder |
| Density | 3.96 g/cm3 |
| Melting Point | 1104 °C |
| Boiling Point | 1412 °C |
Note: We can manufacture and supply different particle sizes (Nano size range, Micron, Submicron, and different Mesh size) products of Alloy powders (Multi-Element, Multi-Element Oxide and Mixture of Rare Earth Elements) according to client’s requirements. Kindly ask for the customization in size and Element ratio composition.
Nickel Chromium Aluminum Yttrium Alloy Nanopowder
Ni-Cr-Al-Y Alloy Nanoparticles/Nanopowder (Particle Size Less than ≤ 80 nm, 99.9%)
Nickel Chromium Aluminum Yttrium Alloy Nanopowder
| Product Formula | Ni: Cr: Al: Y |
| Product Number | NCZ-A-119-19 |
| Molecular Weight | 226.81 g/moL |
| APS | ≤ 80 nm (can be customized) |
| Purity | 99.9% |
| Color | Grayish |
| Form | Nanopowder |
Note: We can manufacture and supply different particle sizes (Nano size range, Micron, Submicron, and different Mesh size) products of Alloy powders (Multi-Element, Multi-Element Oxide and Mixture of Rare Earth Elements) according to client’s requirements. Kindly ask for the customization in size and Element ratio composition.
Nickel Chromium Cobalt Alloy Nanopowder
Nickel Cobalt Chromium Aluminum Yttrium Alloy Nanopowder
Ni-Co-Cr-Al-Y Alloy Nanoparticles/Nanopowder (Particle Size Less than ≤ 80 nm, 99.9%)
Nickel Cobalt Chromium Aluminum Yttrium Alloy Nanopowder
| Product Formula | Ni: Co: Cr: Al: Y |
| Product Number | NCZ-A-120-19 |
| Molecular Weight | 285.51 g/moL |
| APS | ≤ 80 nm (can be customized) |
| Purity | 99.9% |
| Color | Grayish |
| Form | Nanopowder |
Note: We can manufacture and supply different particle sizes (Nano size range, Micron, Submicron, and different Mesh size) products of Alloy powders (Multi-Element, Multi-Element Oxide and Mixture of Rare Earth Elements) according to client’s requirements. Kindly ask for the customization in size and Element ratio composition.
Nickel Cobalt Iron Oxide Nanoparticles
Nickel Cobalt Iron Oxide Nanoparticles
Product Name: Nickel Cobalt Iron Oxide Nanoparticles (Ni0.5Co0.5Fe2O4, Purity: >99.9% APS: 40nm)
| Product | Nickel Cobalt Iron Oxide Nanoparticles |
| Cat No | NCZ-MN-099/20 |
| CAS | 1313-99-1 |
| APS | 40nm |
| Purity | >99.9 % |
| Molecular Formula | Ni0.5Co0.5Fe2O4 |
| Form | Powder |
| Color | Gray-black/dark brown |
| Density | 5.2 g/cm³ |
| Solubility | Insoluble in water |
Please email us for the customization.
Email: contact@nanochemazone.com
Please contact us for customization and price inquiry
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Nickel Cobalt Oxide
Nickel Cobalt Oxide
| Product |
Nickel Cobalt Oxide |
| CAS No. | 58591-45-0 |
| Appearance | Dark Green |
| Purity | 99% |
| APS | 1-5µM (Can be customized) |
| Ingredient | NiCoO2 |
| Product Code | NCZ-NSC641/20 |
| Molecular Weight | 149.63 g/mol |
| Density | 6.6 g/mL |
| Melting Point | 1000 °C |
Nickel Cobalt Oxide Description
Nickel Cobalt Oxide Nanoparticles are typically < 100 nm (XRD) with specific surface area (SSA) in the < 10 m2/g range. Nano Nickel Cobalt Oxide Particles are also available in passivated and in Ultra high purity and high purity and carbon coated and dispersed forms. They are also available as a dispersion through the Nanochemazone Nanofluid production group. Nanofluids are generally defined as suspended nanoparticles in solution either using surfactant or surface charge technology. Nanofluid dispersion and coating selection technical guidance is also available. Other nanostructures include nanorods, nanowhiskers, nanohorns, nanopyramids and other nanocomposites.
Related Information
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters
Nickel Foil
Product: Nickel Foil (Ni, Purity: 99.9%, Thickness: 12 µm)
| Materials | Nickel Foil |
| Stock No. | NCZ-F-0015 |
| CAS | 7440-02-0 |
| Purity | ≥ 99.9% |
| Thickness | 12 μm, customization is available |
| Width | 30~500 mm, customization is available |
| Surface density | 8.908 g/cm3 |
| Melting Point | 1455 °C |
| Boiling Point | 2730 °C |
| Joint | 1pcs/roll |
| Polished | One/Both Side Polished |
| Polished | One Side Coarse |
Nickel Graphite Alloy Nanopowder
Ni-C Alloy Nanoparticles/Nanopowder (Particle Size Less than ≤ 80 nm, 99.9%)
Nickel Graphite Alloy Nanopowder
| Product Formula | Ni: C |
| Product Number | NCZ-A-135-19 |
| CAS Number | 7440-02-0/7440-44-0 |
| Molecular Weight | 70.70 g/moL |
| APS | ≤ 80 nm (can be customized) |
| Purity | 99.9% |
| Color | Gray |
| Form | Nanopowder |
Note: We can manufacture and supply different particle sizes (Nano size range, Micron, Submicron, and different Mesh size) products of Alloy powders (Multi-Element, Multi-Element Oxide and Mixture of Rare Earth Elements) according to client’s requirements. Kindly ask for the customization in size and Element ratio composition.
Nickel Hydroxide Nanowire
| Product | Nickel Hydroxide nanowire |
| Chemical Formula | Ni(OH)2 |
| Stock No. | NCZNW112-19 |
| CAS Number | 12054-48-7 |
| Molar mass | 92.724 g/mol |
| Density | 4.10g/cm3 |
| Melting Point | 230 ˚C |
| Crystal Structure | Hexagonal |
| Diameter | 40 nm (customization available) |
| Length | 50 µm (customization available) |
Please contact us for customization and price inquiry.
Note: We supply different size ranges of Nickel Hydroxide Nanowires as per the client’s requirements and also accept customization in various parameters.
Nickel Iron Alloy Powder
Product Name: Nickel Iron Alloy Powder
| Product | Nickel Iron Alloy Powder |
| CAS No. | 7440-02-0, 7439-89-6 |
| Appearance | Powder |
| Purity | 99.9% |
| APS | 1 – 5 microns (can be customized) |
| Ingredient | Fe-Ni |
| Product Code | NCZ-AE-255 |
DESCRIPTION
The nickel-iron alloy powder is an alloy powder containing both a nickel element and an iron element, and can be prepared by an atomization method and a reduction method. At the same time, the advantages of iron alloy powder and nickel alloy powder are taken into consideration. Used in powder metallurgy, automotive parts, WNiFe_, diamond tools, magnetic shielding materials for magnetic materials.
RELATED INFORMATION
Storage Conditions:
Airtight sealed, avoid light, and keep dry at room temperature.
Please email us for the customization.
Email: contact@nanochemazone.com
Nickel Iron Oxide Nanoparticles
Nickel Iron Oxide Nanoparticles
Product Name: Nickel Iron Oxide Nanoparticles (NiFe2O4, Purity: >99.9%, APS: 30 nm)
| Product | Nickel Iron Oxide Nanoparticles |
| Cat No. | NCZ-MN-100/20 |
| CAS No | 12168-54-6 |
| APS | 30 nm |
| Purity | >99.9% |
| Molecular Formula | NiFe2O4 |
| Molecular Weight | 234.38 g/mol |
| Form | Powder |
| Color | Brown/Black |
| Density | 5.368 g/cm³ |
| Bulk Density | 0.87-0.90 g/cm³ |
| SSA | 65 m²/g |
| Solubility | Insoluble in water |
Please email us for the customization.
Email: contact@nanochemazone.com
Please contact us for customization and price inquiry
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.